Tascam UH-7000 High Resolution Interface and Stand Alone Microphone Preamp

Sku #J08442000000000

45 day price guarantee, 45 day return policy, 100% secure shopping

$399.99 Finance Now!

In Stock & Ready To Ship

Restrictions Apply (Details)

Add to list
See All Tascam Audio Interfaces

High-end USB audio interface.

The UH-7000 is a pro-level microphone preamp and audio interface designed with a strong focus on low noise and high audio quality. Not only can this unit be used as a 4-in/4-out audio interface in a DAW production environment, but also as a standalone microphone preamp and A/D / D/A converter. The built-in HDIA (High Definition Instrumentation Architecture) microphone preamps perform at ˆ’128 dBu equivalent input noise, a signal-to-noise ratio of 117 dB and distortion of 0.0009 % or less.

The grand nature of the UH-7000's sound is partially due to the careful attention spent on selecting parts. In addition to Burr-Brown converters and metal thin-film resistors, installed is a powerful TCXO clock generator with a precision of ±1 ppm.

The unit's half-rack size makes it easy to install at a studio console or work desk. The thick aluminum panels used on the front and sides of the full-metal body help increase stability. Highly important but easily forgotten about are the smooth-tension aluminum input level knobs for precise level adjustments.

The UH-7000 microphone preamp and audio interface enables composers, musicians and recording engineers to produce music in their private quarters at a level generally reached only in professional studios.

Record confidently with the UH-7000
Dual-sided PCM4220 A/D converters capture your mic or line inputs at up to 192kHz/24-bit resolution. The temperature-compensated internal clock offers 1PPM resolution better than stand-alone clock generators that sell for twice the price, and limiting jitters for clean recordings. When monitoring and line output, the UH-7000 coerces your audio through a Burr Brown DA converter for fluid and honest sound reproduction.
Even the highest quality microphone preamps are of no use if they dont have a sufficient power source behind them. Another crucial component of the UH-7000 is its audiophile-designed power supply. An extra-large power transformer and other factors guarantee that all internal components work to their full potential. Most competing interfaces fall short in this category.

The unit itself is not only a figurative bridge between home and studio recording, but it is built like one too. With a solid aluminum structure, its easy to see that the UH-7000 means business. The knobs are meticulously calibrated for smooth, custom-tapered gain setting and the bright 20-segment LED peak meters accurately convey each channels true level. The device is equipped with (2) XLR balanced inputs with full +48V phantom power, (2) balanced 1/4 inputs, (2) balanced XLR outputs, and AES/EBU digital out. Work the fantastic preamps of the UH-7000 into your current recording/live setup, or plug this versatile interface into your computer and start recording.

Stop treading water between two worlds, and take the bridge to studio-quality recording with the UH-7000 USB Interface and Stand-Alone Microphone Preamplifier.

  • High-end 2-channel USB audio interface for Windows and Mac
  • Stand-alone high-end AD converter for monitoring or recording
  • High-performance mic preamp reduces influence of impedance mismatch
  • Superb audio quality with samling rates up to 192 kHz at 24-bit resolution
  • Ultra-high dynamic range of 123 dB (A/D) and 128 dB (D/A)
  • Professional-grade PCM4220 A/D and D/A converters from Texas Instruments
  • Selected components for outstanding sound quality with minimized noise and distortion
  • High-precision clock synchronization with sample-accuracy at both recording and playback
  • On-board DSP mixer and effects
  • Two selectable mixer modes
  • Mixer panel for intuitive mixing and effects handling on the computer screen
  • Dedicated button for opening/closing the mixer panel on the computer
  • Two large TRIM knobs for precise level adjustment
  • XLR and TRS balanced analogue inputs
  • Switchable 48-V phantom power on XLR inputs
  • XLR balanced line outputs
  • Line output level can optionally be adjusted with the headphones level control
  • Powerful headphones output with dedicated level control
  • AES/EBU digital I/O
  • Low-latency monitoring
  • Easy-to-read 20-dot LED level meter
  • Aluminum front and side panels for long durability even under tour conditions
  • Half-rack size

Order today for professional recording at home or in the studio,


UH-7000 High Resolution Interface and Stand Alone Microphone Preamp Specifications:

  • Audio resolution
    Sampling frequencies 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
    Quantization bit depth 24-bit
    Analogue audio inputs and outputs
    Line inputs (ANALOG (BALANCED) LINE IN 1/2) 6.3-mm standard TRS jacks
    Input impedance 15 kOhm
    Maximum input level +26.5 dBu
    Minimum input level ˆ’38 dBu
    Mic inputs (ANALOG (BALANCED) MIC IN 1/2) XLR-3-31 equivalent
    Input impedance 2.2 kOhm
    Maximum input level +2 dBu
    Minimum input level ˆ’60 dBu
    Line outputs (ANALOG (BALANCED) OUTPUT L/R) XLR-3-32 equivalent
    Output impedance 100 Ohm
    Maximum output level (INPUT knob at minimum) +24 dBu
    Headphones output (PHONES) 6.3-mm standard stereo jack
    Maximum output power 45 mW + 45 mW or higher (THD+N: 1% or less, 32 Ohm load)
    Digital audio inputs and outputs
    DIGITAL (AES/EBU) IN XLR-3-31 equivalent
    Formats IEC 60958-3 (S/PDIF)
    IEC 60958 for pro use (AES/EBU)
    Sampling frequencies —1: 44.1 kHz, 48 kHz
    —2: 88.2 kHz, 96 kHz
    —4: 176.4 kHz, 192 kHz
    DIGITAL (AES/EBU) OUT XLR-3-32 equivalent
    Formats IEC 60958-3 (S/PDIF)
    IEC 60958 for pro use (AES/EBU)
    Sampling frequencies —1: 44.1 kHz, 48 kHz
    —2: 88.2 kHz, 96 kHz
    —4: 176.4 kHz, 192 kHz
    Other inputs and outputs
    USB 4-pin USB B-type
    Transfer rate: USB 2.0 High Speed (480 Mbit/s), Full Speed (12 Mbit/s)
    Audio performance
    Equivalent input noise (EIN) -128 dBu (unweighted, 60 dB, 40 Ohm)
    ADC dynamic range 123 dB (A-weighted)
    DAC dynamic range 123 dB (A-weighted)
    Frequency response, Mic preamp 20 Hz - 80 kHz, +0.005 dB/ˆ’0.16 dB (all Fs)
    S/N ratio 117 dB (MIC to AD)
    Distortion 0.0009 % (MIC to AD)
    Computer system requirements
    Supported operating systems Windows 8 (including 8.1) 32-bit
    Windows 8 (including 8.1) 64-bit
    Windows 7 32-bit SP1 or later
    Windows 7 64-bit SP1 or later
    Windows XP 32-bit SP3 or later
    (Windows Vista and Windows XP 64-bit are not supported)
    Computer hardware requirements Windows computer with a USB 2.0 port
    CPU/speed: 2 GHz or faster dual core processor (x86)
    Memory: 2 GB or more
    Supported operating systems OS X Mavericks (10.9.1 or later)
    OS X Mountain Lion (10.8.4 or later)
    OS X Lion (10.7.5 or later)
    Mac OS X Snow Leopard (10.6.8 or later)
    Computer hardware requirements Apple Macintosh computer with a USB 2.0 port
    CPU/speed: 2 GHz or faster dual core processor
    Memory: 2 GB or more
    Supported audio drivers ASIO 2.0, WDM (MME)
    Core Audio
    Power supply and other specifications
    Power supply AC 100-240 V, 50/60 Hz
    Power consumption 15 W
    Dimensions (W — H — D) 214 mm — 81 mm — 233 mm
    Weight 2.2 kg
    Operating temperature range 5-35 C
review resources