Open Box (Blemished) 
Tascam DM-3200 Digital Mixer  888365856995

(888365856995)  Sku #630519005000012

FREE SHIPPING on Almost Everything

Top Rated

$1,839.99 Finance Now! Special Promotions
  1. Top Rated

In Stock & Ready To Ship

Restrictions Apply (Details)

Add to list
See All Tascam Digital Mixers
Tascam

The TASCAM DM-3200 has more of everything that made the DM-24 a pedigreed studio workhorse.

Tascam DM-3200
General Description
It has 4-band fully-parametric EQ and dynamics on every channel and two effects processors, each capable of running the built-in TC Works Reverb processor. Surround mixing is available with up to 6.1-channel panning, and the optional IF-SM/DM expansion card adds surround monitoring and downmixing to the DM-3200. The DM-3200 provides a new way to record with DAW recording software. With the addition of an optional expansion card, the IF-FW/DM FireWire interface, the DM-3200 becomes a 24-channel computer audio interface, making it a complete studio solution for professional DAW recording. Built-in HUI, Mackie Control and FW-1884 emulation allows the console to function as a flexible control surface for workstation software. This gives you the best of both worlds - total control over your recording software transport and mixing capabilities with the cue mixing, talkback, microphone preamps and world-class automation provided by the DM-3200.

Features
32 channels and 16 auxiliary returns for 48 total inputs
16 buses ” configurable as two 6.1 surround sends
8 Aux Sends
16 analog mic/line inputs with phantom power for condenser mics, analog inserts and -20dB pad switch
24 channels of TDIF and 8 channels of ADAT built in
2 expansion card slots support optional FireWire, ADAT, AES/EBU, Analog & TDIF cards
Dedicated cascade port supports cascade of two DM-3200s
Per channel LED ring encoders for pan, aux sends and EQ
Built-in DAW control
All inputs, effects and processing are available at 96k -- no features are sacrificed at full sampling rate
Transport controls control DAW, HDR or tape playback
Dedicated DAW control surface layer for Digidesign Pro Tools, Cakewalk SONAR, MOTU DP, Apple Logic, Steinberg Cubase and Nuendo
Powerful automation with touch-sensitive motorized faders
4-band parametric EQ and dynamics on each channel
32-bit internal resolution with 64-bit EQ resolution
Two built-in effects processors include TC Works reverb processing
Flexible routing ” route from virtually any input to any output
Back up mix data to convenient Compact Flash media slot or to USB
Optional MU-1000 meter bridge
Stylish, professional design with rear panel I/O connections
TASCAM Mixer Companion software (Win XP/OSX) with:
Driverless USB connection to computer
Backup/restore data via USB
On screen timecode, transport and meter displays
Maximum overall dimensions (w x d x h): 27.6" x 32.9" x 9.1"_(700mm x 836mm x 230mm)
Weight 52.8lbs (24kg

Order this advanced mixer with the assurance of our Dual Guarantees. You've gotta love it or your money back!

 

DM-3200 Digital Mixer Specifications:

Analog audio I/O 

All specifications are given with the factory reference
level of ”16 dBFS.

MIC inputs (channels 1 through 16) balanced XLR-type female connectors
adjustable input level: (”60 dBu (TRIM max) to ”4 dBu (0 dB pad))
(”40 dBu (TRIM max) to +16 dBu (”20 dB pad))
Input impedance 2.2k Ohms
PHANTOM (+48V) +48 V phantom power. Switchable in blocks of 4 channels
(1”4, 5”8, 9”12, 13”16)
LINE IN (BAL) inputs (channels 1 through 16) balanced 1/4" jacksb
adjustable input level (”44 dBu (TRIM max) to +12 dBu (TRIM min))
Input impedance 10k Ohms
INSERT connections (channels 1 through 16)od 1/4" TRS jacksc
Send: nominal output level ”2dBu, maximum output level +14 dBu,
impedance 100 Ohms
Return: nominal input level ”2dBu, headroom 16 dB, impedance 10 kohms
ASSIGNABLE RETURNS (BAL) (1 through 4) Balanced 1/4" jacks
Nominal input level: +4 dBu
Headroom: 16 dB
Input impedance: 5k Ohms
ASSIGNABLE SENDS (1 through 4) Pseudo-balanced 1/4" jacks
Nominal output level: ”2 dBu
Maximum output level: +14 dBu
Output impedance: 100 Ohms
2 TR IN (L/R) 2 x RCA pin jacks
Nominal input level ”10 dBV
Headroom: 16 dB
Input impedance: 10 k Oms
STEREO OUTPUT (L/R) Balanced XLR-type male connectors
Nominal output level: +4 dBu
Maximum output level: +20 dBu
Output impedance: 100 Ohms
MONITOR OUTPUTS (CR (BAL)) Pseudo-balanced 1/4" jacks
Nominal output level: +4 dBu
Maximum output level: +20 dBu
Output impedance: 100 Ohms
MONITOR OUTPUTS (STUDIO) RCA pin jacks
Nominal output level ”10 dBV
Maximum output level: +6 dBV
Output impedance: 100 Ohms
PHONES 2 x 1/4" stereo jacks
50 mW + 50 mW total
32 Ohms

a. all XLR-type connectors are wired 1=ground, 2="hot", 3="cold"
b. all balanced 1/4" jacks are wired sleeve=ground, ring=cold, tip=hot
c. all TRS 1/4" jacks are wired sleeve=ground, ring=return, tip=send
d. Maximum with both PHONES jacks driven at maximum

Digital audio I/O
DIGITAL INPUTS (1, 2) 2 x XLR-type female connectors (input impedance 110 Ohms) or
2 x RCA pin jacks (input impedance 75 Ohms) (selectable)
AES3-1992 or IEC60958 data format (automatically detected)
24-bit word length
Switchable sampling frequency conversion available
DIGITAL OUTPUTS (1, 2) 2 x XLR-type male connectors (output impedance 110 Ohms)
2 x RCA pin jacks (output impedance 75 Ohms)
AES3-1992 or IEC60958 data format (software selectable)
24-bit word length
TDIF-1(1, 2, 3) 3 x 25-pin (female) D-sub connectors (metric lock screws)
Conform to TDIF-1 standard
24-bit word length
ADAT IN/OUT 2 x "Lightpipe" optical connectors
Conform to ADAT OPTICAL specifications
24-bit word length
Sampling frequencies Internal 44.1 kHz/48 kHz, 88.2 kHz/96 kHz (high sampling frequencies)
External ±6.0%
Signal delay < 1.7 ms ” Fs = 48 kHz, LINE IN to STEREO OUTPUT
< 0.85 ms ” Fs = 96 kHz, LINE IN to STEREO OUTPUT

Miscellaneous I/O connections
WORD SYNC IN BNC connector
Switchable 75 Ohms termination
TTL level
WORD SYNC OUT/THRU BNC connector
Switchable between through and output
TTL level
MIDI IN, OUT, THRU/MTC OUT 3 x 5-pin DIN connectors”conform to MIDI specifications
USB USB 1.1 'B' type connector (12 Mbps)
TIME CODE IN RCA pin jack
Conforms to SMPTE specifications
FOOT SW 1/4" mono jack
TO METER 25-pin female D-sub connector (non-metric lock screws)
For use with the optional MU-1000
RS-422 (for Sony 9-pin) 9-pin female D-sub connector (non-metric lock screws)
wired to RS-422 standards
GPI (for Machine start) 9-pin female D-sub connector (non-metric lock screws) wired for GPI control
Pin 1=GP11, Pin 2=GPI2, Pin 3=GPI3, Pin 4=GPI4, Pin 5=GND, Pin
6=GPI5, Pin 7=GPI6, Pin 8=GPI7, Pin 9=GP18

Specifications : Equalization
Equalization
All filters are fitted with "gain flat" switches
System performance
Physical characteristics
EQ switch On/Off
HIGH filter Gain: ±18 dB, 0.5 dB resolution
Frequency: 31 Hz to 19 kHz
Q: 0.27 to 8.65
Type: Hi-shelving, Peak, LPF
HI MID filter Gain: ±18 dB, 0.5 dB resolution
Frequency: 31 Hz to 19 kHz
Q: 0.27 to 8.65
Type: Peak, Notch
LO MID filter Gain: ±18 dB, 0.5 dB resolution
Frequency: 31 Hz to 19 kHz
Q: 0.27 to 8.65
Type: Peak, Notch
LOW filter Gain: ±18 dB, 0.5 dB resolution
Frequency: 31 Hz to 19 kHz
Q: 0.27 to 8.65
Type Low-shelving, Peak, HPF
THD (maximum level,
1 kHz, TRIM: minimum)
20 Hz ” 22 kHz LINE IN to INSERT SEND
LINE IN to STEREO OUTPUT
< 0.005%
< 0.008%
Frequency response
(nominal level, 1 kHz,
TRIM: minimum)
0.5dB/-1.0dB MIC/LINE to INSERT SEND
0.5dB/-1.5dB MIC/LINE to INSERT SEND
0.5dB/-1.0dB MIC/LINE to STEREO OUTPUTa
0.5dB/-1.5dB MIC/LINE to STEREO OUTPUTa
a. MIC/LINE to channel module to STEREO OUTPUT, channel and stereo faders at 0 dB, pan hard left or hard
right
20 Hz ” 20 kHz (44.1/48 kHz)
20 Hz ” 40 kHz (88.2/96 kHz)
20 Hz ” 20 kHz (44.1/48 kHz)
20 Hz ” 40 kHz (88.2/96 kHz)
Noise level (20 Hz ”
22 kHz, TRIM: max,
150 ohms)
MIC in (PAD off) to INSERT SEND (A weight)
STEREO OUT (Input no assign)
ASSIGNABLE RETURN to ASSIGNABLE SEND
2TR IN to CR OUTPUT (CR: max, 0dB)
2TR IN to STUDIO OUT (STUDIO OUT 0dB)
< ”128 dBu (EIN)
< ”83 dBu
< ”85 dBu
< ”78 dBu
< ”88 dBu
Crosstalk @ 1 kHz STEREO/BUSS/AUX OUTPUTS
MONITOR OUTPUTS
> 90 dB
> 90 dB
Displays Backlit 320 x 240 LCD with contrast control
2 x 12-segment LED meters
Faders 17 x 100 mm stroke, motor-driven touch-sensitive faders
Maximum overall dimensions (w x d x h) including rest 700 x 824 x 230 (mm) 27.6 x 32.4 x 9.1 (in)
Weight 24 kg (52.8 lbs)
Voltage requirements 120 VAC, 60 Hz
230 VAC, 50 Hz
240 VAC, 50 Hz
Power consumption 65 W
Supplied accessories Power cord, Quick Reference guide, 32 MB CF memory card, USB cable,
CD-ROM, warranty card
review resources
Loading....

REVIEW SNAPSHOT®

by PowerReviews
TascamDM-3200 Digital Mixer
 
5.0

(based on 1 review)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 1 customer

Displaying review 1

Back to top

(6 of 6 customers found this review helpful)

 
5.0

So far... awesome

By 

from Brookfield, WI

Comments about Tascam DM-3200 Digital Mixer:

I upgraded from a DM-24 in my project studio to take advantage of the DM-3200's built-in love for Cubase. I've quickly learned that that is just the tip of the iceberg on this board! The workflow on this console is SO intuitive and at the same time, there are SO many options available. The routing is second-to-none, and it's all easy to do! I haven't delved into the built-in dynamics/EQ's/effects yet, but as a DAW front end, monitor controller and cue mixer, so far it's fantastic! Things I absolutely love: The multifunction ring encoders... are awesome DAW integration... is fantastic I/O options (8 aux's, 16 busses!!)... couldn't ask for more. The preamps are pretty good - they seem to have plenty of headroom, although they're obviously not up to the level of boutique-level units, they get the job done. And, if you want to add more, there are a million different digital and analog I/O's to do it with! I HIGHLY recommend the DM-3200. It's made a huge difference already for me!

Displaying review 1

Back to top