Shure MX202P MicroFlex Overhead Condenser Mic with Plate-Mount Preamp Black Cardioid

Product #270396

45 day price guarantee, 45 day return policy, 100% secure shopping

$196.00 Finance Now!

Select a Style to Continue
Add to list
See All Shure Condenser Microphones
Shure

Accurate sound reproduction in an unobtrusive overhead microphone.

The MX202P Microflex Overhead condenser microphone captures Shure quality sound in a compact, adjustable package. The MX202P features a condenser microphone cartridge attached to a flexible, 4" gooseneck with a 30' cable. The plate-mounted preamp offers easy ceiling installation, and when combined with the high sensitivity cartridge's wide frequency response, this microphone provides accurate sound reproduction with a minimum of RF interference or electromagnetic hum.

Also available with an inline preamp (see product # 270395).
Requires phantom power.

FEATURES
  • Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
  • Balanced, transformerless output for increased immunity to noise over long cable runs
 

MX202P MicroFlex Overhead Condenser Mic with Plate-Mount Preamp Specifications:

  • Frequency Response
  • 50 to 17,000 Hz
  • Output Impedance
  • 180 ohms actual (EIA rated at 150 ohms)
  • Sensitivity (At 1,000 Hz, open circuit voltage*)
  • Cardioid: -35.0 dBV/Pa (17.8 mV)
  • Supercardioid: -33.5 dBV/Pa (21.1 mV)
  • All values -12 dB at 0 gain; *1 Pascal = 94 dB SPL
  • Maximum SPL (1 kHz at 1% THD, 1 k ohm load)
  • Cardioid: 124.2 dB
  • Supercardioid: 122.7 dB
  • All values +6 dB at 0 gain
  • Equivalent Output Noise (A-weighted)
  • Cardioid: 28.0 dB SPL
  • Supercardioid: 26.5 dB SPL
  • Signal to Noise Ratio (referenced at 94 dB SPL)
  • Cardioid: 66.0 dB
  • Supercardioid: 67.5 dB
  • Dynamic Range at 1 k ohm load
  • 96.2 dB
  • 100 dB at 0 gain
  • Common Mode Rejection
  • 45.0 dB minimum
  • Preamplifier Output Clipping Level (1% THD)
  • -6.0 dBV (0.5 V)
  • -12 dBV at 0 gain
  • Polarity
  • Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
  • Power Requirements
  • 11 to 52 Vdc phantom, 2.0 mA
  • Environmental Requirements
  • Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F)
  • Relative Humidity
  • 0 to 95%
  • Cable Length
  • 9 m (30 ft)
review resources
Loading....