Shure MX202P MicroFlex Overhead Condenser Mic with Plate-Mount Preamp White Supercardioid

(WhiteSupercardioid)  Sku #270396000002579

45 day price guarantee, 45 day return policy, 100% secure shopping

$196.00 Finance Now!

Select a Style to Continue
Add to list
See All Shure Condenser Microphones
Shure

Accurate sound reproduction in an unobtrusive overhead microphone.

The MX202P Microflex Overhead condenser microphone captures Shure quality sound in a compact, adjustable package. The MX202P features a condenser microphone cartridge attached to a flexible, 4" gooseneck with a 30' cable. The plate-mounted preamp offers easy ceiling installation, and when combined with the high sensitivity cartridge's wide frequency response, this microphone provides accurate sound reproduction with a minimum of RF interference or electromagnetic hum.

Also available with an inline preamp (see product # 270395).
Requires phantom power.

FEATURES
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Balanced, transformerless output for increased immunity to noise over long cable runs
 

MX202P MicroFlex Overhead Condenser Mic with Plate-Mount Preamp Specifications:

Frequency Response
50 to 17,000 Hz

Output Impedance
180 ohms actual (EIA rated at 150 ohms)

Sensitivity (At 1,000 Hz, open circuit voltage*)
Cardioid: -35.0 dBV/Pa (17.8 mV)
Supercardioid: -33.5 dBV/Pa (21.1 mV)
All values -12 dB at 0 gain; *1 Pascal = 94 dB SPL

Maximum SPL (1 kHz at 1% THD, 1 k ohm load)
Cardioid: 124.2 dB
Supercardioid: 122.7 dB
All values +6 dB at 0 gain

Equivalent Output Noise (A-weighted)
Cardioid: 28.0 dB SPL
Supercardioid: 26.5 dB SPL

Signal to Noise Ratio (referenced at 94 dB SPL)
Cardioid: 66.0 dB
Supercardioid: 67.5 dB

Dynamic Range at 1 k ohm load
96.2 dB
100 dB at 0 gain

Common Mode Rejection
45.0 dB minimum

Preamplifier Output Clipping Level (1% THD)
-6.0 dBV (0.5 V)
-12 dBV at 0 gain

Polarity
Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.

Power Requirements
11 to 52 Vdc phantom, 2.0 mA

Environmental Requirements
Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F)

Relative Humidity
0 to 95%

Cable Length
9 m (30 ft)
review resources
Loading....