Phonic AM 844D Mixer with USB Interface

Sku #H82131002000000

45 day price guarantee, 45 day return policy, 100% secure shopping


Item Note:

This product has been discontinued but may be available as a Open Box item.

Similar Items

See All Phonic Unpowered Mixers

Small format mixer with USB output.

The Phonic AM 844D mixers is a compact and versatile mixing solution with 8 Mic/Line mono channels and 4 stereo inputs, two of which have microphone inputs. Ultra low noise pre-amps ensure high quality sound when used in project studios or sound reinforcement. Low-cut filters on mono channels eliminate unwanted sounds like stage rumble, P-pops, wind noise and low frequency recording studio room resonances. The multi-band EQ on mono channels gives you total control over your mix. The AM series also makes monitoring the mix easy with its dual multi-segment LED level meters and high volume headphone outputs.

  • 8 Mic/Line Mono channels
  • 4 stereo channels (two with Mic input)
  • 10 Mic preamps
  • Direct Outputs for Multitrack recording
  • 3 band EQ with swept mid range plus low cut on each mono channel
  • 18dB/oct, 75Hz Loc Cut Filter on each mic channels
  • 4 AUX Sends, AUX 1 & 2 with Pre/Post selector
  • 32/40-bit digital stereo multi-effect processor with 100 programs, tap-delay and test-tones
  • 4 stereo AUX Returns
  • Solo selector on each input channel
  • CTRL RM Phones with multi input source matrix selector
  • 8 Subgroups with Fader control and L-R assign buttons
  • Record Output
  • 2T return with control level and TO MAIN L/R assign button
  • Built-in switching power supply with universal connector, 90-260VAC, 50/60Hz
  • 12V XLR Connector for gooseneck lamp

Order today and record your performance at gigs or rehearsals.


AM 844D Mixer with USB Interface Specifications:

  • Inputs Total channels: 12
    Balanced mono mic/line channel: 8
    Balanced mic/stereo line channel: 2
    Balanced stereo line channel: 2
    AUX return: 4 stereo
    2T input: Mini stereo and stereo RCA

    Outputs Main L/R stereo: 2 x 1/4" (6.4 mm) TRS, Bal. & 2 x XLR
    Group: 8
    Rec out: Mini stereo and stereo RCA
    CTRL RM L/R: 2 x 1/4" (6.4mm) TS
    Phones: 2

    Channel Channel strips: 12
    EFX send: 4
    Pan/balance control: yes
    Volume controls: 2.4" (60mm) fader
    Inserts: 8

    Level Control: Phones level control: yes
    Main L/R level control: 2.4" (60mm) fader
    Level meter: 13-segment
    Phantom power supply: +48V DC

    Freq. Response: (Rec/Repro) 20Hz-60KHz: +0/-1 dB
    20Hz-100KHz: +0/-3 dB

    Crosstalk Crosstalk (1KHz @ 0dBu, 20Hz-20KHz bandwidth, channel in to main L/R outputs)
    Channel fader down, other channels at unity <-90 dB

    Noise: 20Hz-20KHz; measured at main output, Channels 1-4 unit gain; EQ flat; all channels on main mix; channels 1/3 as far left as possible, channels 2/4 as far right as possible. Reference= +6dBu
    Master @ unity, channel fader down: -86.5 dBu
    Master @ unity, channel fader @ unity: -84 dBu
    S/N ratio, ref to +4: >90 dB

    Microphone: Microphone preamp E.I.N. (150 ohms terminated, max gain) <-129.5 dBm
    THD: Any output, 1KHz @ +14dBu, 20Hz-20KHz, channel inputs <0.005%
    CMRR: 1 KHz @ -60dBu, gain at maximum 80dB

    Maximum Input/Output Level Mic preamp input: +10dBu
    All other input: +22dBu
    Balanced output: +28dBu

    Impedance: Mic preamp input: 2 kohms
    All other input (except insert): 10 kohms
    RCA 2T output: 1.1 kohms

    Equalization: Equalization: 3-band, +/-15dB
    Low EQ: 80Hz
    Mid EQ: 100-8kHz, sweepable
    L-mid EQ: 800Hz
    H-mid EQ: 3kHz
    Hi EQ: 12kHz

    Filter: Low cut filter: 75Hz (-18 dB/oct)

    USB: USB audio: Stereo in/out
    Connector type: USB Type B
    Bitrate: 16-bit
    Sampling rate: 48kHz Digital effect processor: 100 effects with tap delay control and test tones
    Footswitch: EFX on/off

    Power Requirements: 100-240 VAC, 50/60Hz
    Dimensions (WxHxD)" 16.5 x 5.9 x 16.5" (418 x 149.5 x 420mm)
    Weight: 13 lb. (5.9kg)
review resources