Skip to main content Skip to footer

 
Peavey PVi 6500 6-Channel 400W Powered PA Head with Bluetooth and FX  

Sku #J00085000000000

45 day price guarantee, 45 day return policy, 100% secure shopping

$399.99 Finance Now!

In Stock & Ready To Ship

Add to list
See All Peavey Powered Mixers
Peavey

Powered mixer with all the extras.

The Peavey PVi 6500 is a revolutionary all-in-one powered mixer with everything a musician needs: six combination XLR and 1/4" inputs using Peavey's award-winning mic preamps, and 400 watts of peak power for crystal-clear audio reproduction. The Peavey PVi 6500 uses exclusive and patented features like Mid Morph to accurately help improve tone and clarity of vocals. Feedback is quickly and easily identified and removed with Peavey's nine-band graphic EQ combined with our patented and revolutionary FLS Feedback Locating System. The PVi 6500 is equipped with Peavey's exclusive Kosmos-C technology, which drastically enhances both the low and high end of the audio spectrum. Footswitchable, built-in 24-bit digital effects complements the already feature-packed unit. Connect virtually any music device to this versatile mixer via the onboard 1/4", RCA and 1/8" mini jacks.

FEATURES
FLS Feedback Locating System
Footswitchable effects defeat
Combination XLR and 1/4" input jacks
RCA, 1/8" Media input
Selectable 9-Band Graphic EQ with FLS
Selectable Main or Monitor dual power section
RCA Record outputs
On-board 24- bit digital effects with mute button
Clip light and signal present indicator
Main line level 1/4" output
Speaker protection circuit
48 Volt Phantom Power
Bluetooth streaming audio

Order now and improve your rehearsals, performances and cartage.

 

PVi 6500 6-Channel 400W Powered PA Head with Bluetooth and FX Specifications:

INPUT SENSITIVITY:
Mic In to full power at the power amp. Master Volume Nom.
Full: -40 dBu
Nominal: -22 dBu
Line In to full power at the power amp. Master Volume Nom.
Full: -10 dBu
Nominal: +8 dBu

CHANNEL EQ:
Shelving EQ
Low EQ 80 Hz ±15 dB
Mid-Morph
Low 250 Hz ±15 dB
High 4 kHz ±15 dB
High EQ 12 kHz ±15 dB
CLIP LED:
Clip LEDs come on 3 dB before clipping.

FREQUENCY RESPONSE:
All controls nominal (detent)
Mic to Main 20 Hz - 20 kHz +0, -1 dB
Line to Main 20 Hz - 30 kHz +0, -1 dB
Mic to Amp 50 Hz - 20 kHz +0, -3 dB
Line to Amp 40 Hz - 20 kHz +0, -3 dB

PHANTOM POWER:
+48 VOLTS

NOISE:
Main = Main line output, 22 - 22 kHz filter
Amp 1 = Amplifier output, loaded at 4 Ohms, through AP
AUX-0025 switching amplifier filter
All controls full down.
Main <-95 dBu
Amp 1 <-70 dBu
Master Volume nominal
Main <-88 dBu
Amp 1 <-67 dBu

THD:
All controls nominal
<0.01% @ main line output, -30 dBu in mic input Channel 1
<0.5% @ amp 1 @ 100 Watts into 4 Ohms
All controls nominal
<0.005% @ main line output, +4 dBu in line input Channel 1

MASTER EQ:
63Hz ±12 dB
125Hz ±12 dB
250Hz ±12 dB
500Hz ±12 dB
1kHz ±12 dB
2kHz ±12 dB
4kHz ±12 dB
8kHz ±12 dB
12kHz ±12 dB

METER ARRAY:
LIMIT
-6 dB
-12 dB
-18 dB
-24 dB
-30 dB

AMP LIMITER:
Limits amplifier power just before clipping. The limiter holds the amp power
without clipping and can be driven up to 18 dB past maximum output.

AMPLIFIER OUTPUT POWER:
120VAC
Both channels loaded at 8 ohms: 60 Watts RMS per ch
120 Watts Peak per ch
Both channels loaded at 4 ohms: 100 Watts RMS per ch
200 Watts Peak per ch

POWER REQUIREMENTS:
Domestic: 120VAC 50/60Hz 74 Watts Nominal
Export: 230VAC 50/60Hz 74 Watts Nominal

SIZE:
Dimensions: H x W x D
11.25" x 19.375" x 10.75"
Weigh t: 22.2 lbs.
review resources
Loading....