Mackie HR824mk2 Studio Monitor (2010)

Sku #485388000000000

45 day price guarantee, 45 day return policy, 100% secure shopping

$699.99 Finance Now!

In Stock & Ready To Ship

Add to list
See All Mackie Powered Studio Monitors
Mackie

Turn your studio's sweet spot into a full-on sweet zone.

The high-resolution Mackie HR824mk2 Active Studio Reference Monitor sounds as smooth as it looks. The rounded contours of the HR824mk2 monitor's Zero Edge Baffle minimize diffraction to give you a crystal clear audio image of your mix. The Mackie Optimized Waveguide delivers full, articulate mids, while the rear-firing, mass-loaded passive radiator ensures tight bass extension to 37Hz. Acoustic Space, low-frequency (LF) roll-off and high-frequency (HF) controls let you easily tailor the sound to suit your space and taste. And thanks to remarkably linear frequency response, Mackie HR824mk2 audio monitors ensure accurate mix translation. Combine all this with wide, even dispersion, and Mackie HR824mk2 monitors turn your studio's sweet spot into a full-on sweet zone.

Features
High-resolution Active studio reference monitor
Ultra-linear frequency response for accurate mix translation
8.75" high-precision, low-distortion LF transducer
1" titanium dome, ferrofluid cooled tweeter
Optimized Waveguide for wide, even sweet zone
Twin FR Series amps - 150W for LF / 100W for HF
Cast aluminum Zero Edge Baffle minimizes diffraction
Full internal damping eliminates midrange artifacts
Passive radiator provides tight, articulate bass extension down to 35Hz
Acoustic Space, LF roll-off, and HF controls
Balanced XLR, TRS, and unbalanced RCA inputs
OmniMount ready for easy wall/ceiling placement
THX pm3 certified for surround sound applications
Perfect for High-Definition audio, cinema and gaming systems

Order today and hear your mixes with a new level of accuracy.

 

HR824mk2 Studio Monitor (2010) Specifications:

Acoustic Section
Free-field Frequency Response: &plsumn;1.5dB, 37Hz to 20kHz
Lower cutoff frequency: -3dB @ 35Hz
Upper cutoff frequency: -3dB @ 22kHz
Sound Pressure Level at 1 meter, -7.5dBu into balanced input: 100dB SPL @ 1m
Maximum peak SPL per pair: 120dB SPL @ 1m
Maximum short term SPL on axis, half space 80Hz to 2.5kHz: 111dB SPL @ 1m
Residual noise (maximum gain, 600? source, 20Hz-20kHz bandwidth): < 8dB SPL @ 1m

Rated Line Input Voltage and Power:
(Power consumption):
Standby mode: 8 watts
Quiescent (idle): 18 watts
Musical Program, Loud mix: 135 watts

US: 120 VAC, 60Hz
Rated Power (For UL-6500, CSA-E65-94, EN-60065): 150 watts

Amplifier Section
(Low-frequency power amplifier)
Rated Power (at 1kHz with 1% THD): 150W
Rated Load Impedance: 4 ohms
Burst Power Output: 350W
Rated THD (1W to -1dB of rated power): 0.1 %
Slew Rate: 35V/S
Distortion (THD, SMPTE IMD, DIM 100): <0.035%

Signal-to-Noise
(20Hz-20kHz, unweighted, referenced to 150W into 4?): > 102dB
Cooling: Convection
Design: Class AB, Parametric Servo Feedback

(High-frequency power amplifier)
Rated Power(at 1kHz with 1% THD): 100W
Rated Load Impedance: 6 ohms
Rated THD (1W to -1dB of rated power): 0.1 %
Burst Power Output: 210W
Slew Rate: 35V/S
Distortion (THD, SMPTE IMD, DIM 100): < 0.035%
Signal-to-Noise (20Hz-20kHz, unweighted, referenced to 40W into 8?): > 102dB
Cooling: Convection
Design: Monolithic IC, Conventional Class AB

System Specifications
Input Type: Balanced Differential (XLR and 1/4" TRS), Unbalanced (RCA)
Input Impedance: 20k? Balanced, 10k? Unbalanced
Input Protection: Rfi and Level Protected
Maximum Input Level: +20dBu
Low Frequency filter: -3dB @ 37Hz, 2nd-order transitional high-pass filter, -3dB @ 47Hz, 4th-order Chebyshev high-pass filter, -3dB @ 80Hz, 4th-order Butterworth high-pass filter
HF Equalization: ±2dB @ 10kHz, shelving
Acoustic Space: (A position) -4dB @ 50Hz, shelving, (B position) -2dB @ 50Hz, shelving, (C position) flat

(Compressor)
Independent high and low-frequency overload detection
Enclosure Alignment: 6th Order
Over Excursion Prevention: 2nd Order High-Pass filter
Low Line Voltage Shut Down: 60% of Nominal Line
Thermal Protection: Amplifier Shut-Down, Auto Reset
Muting: 5 seconds at turn-on
Driver Protection: Independent LF and HF Detection, Overall Compression

Transducers
Low-frequency driver:
Diameter: 8.75 inches (170mm)
Sensitivity (2.83V, 1m): 91dB SPL
Nominal Impedance: 4?
Voice Coil Diameter: 1.6" (40mm)
Frame: Die-cast magnesium
Magnet: Ferrite
Fully shielded: Ferrite opposing magnet
High-frequency driver: Sensitivity (2.83V, 1m): 91dB SPL
Nominal Impedance: 6?
Power Handling (Long Term/Program): 20/50 watts
Frequency Range: 1.6kHz to 22kHz
Diaphragm/Suspension: Titanium with polymer suspension
Voice Coil Diameter: 1.0" (25.4mm)
Magnet: Neodymium
Bucking Magnet: Ferrite opposing magnet

Passive Radiator: 6" x 9" (152mm x 228mm) mass-loaded elliptical flat
piston with variable thickness filleted-edge rubber surround
Crossover Type: Modified Linkwitz-Riley, 24dB/octave @ 1900Hz

Enclosure
Materials and Construction:
3?4" (19mm) thick MDF cabinet construction with internal bracing to add to cabinet stiffness
Piano-black gloss finish
Die-cast aluminum exponential wave guide for controlled, wide dispersion from high-frequency driver and Zero Edge Baffle to minimize diffraction around the cabinet edges
Open cell adiabatic "foam fill" acoustical damping material absorbs internal reflections, preventing delayed sound coloration
Flush-mount connector system allows monitor to be placed against a wall without need for connector clearance

Physical Properties
Height: 16.8"/42.5cm
Width: 10.8"/27.3cm
Depth Enclosure: 11.4"/29.0cm
Depth Overall: 13.8"/35.1cm
Weight: 34.6lb./15.7kg
review resources
Loading....