Lexicon I-ONIX U22 USB 2.0 Audio/MIDI Interface

Sku #501574000000000

45 day price guarantee, 45 day return policy, 100% secure shopping


Item Note:

This product has been discontinued but may be available as a Open Box item.

Similar Items

See All Lexicon Audio Interfaces

Elegantly designed USB recording interface has dbx mic preamps, 6 Lexicon reverb types, MIDI, and more.

Brilliantly designed, the I-ONIX U22 desktop recording interface from Lexicon fits where it makes the most sense, between your keyboard and monitor. Lexicon understands you care passionately about your music, and that it's more than just a pastime, which inspired them to create the I¢ONIX U22, putting all monitor and input level controls at your fingertips.

Featuring dbx microphone preamps on both channels, the I¢ONIX series recording interfaces are more than equipped to provide professional recordings that keep your music sounding its best. The preamps run on a high-voltage supply to guarantee stability and provide you with a superior recording across a wide dynamic range. Performance driven AD/DA converters ensure pristine 24-bit/96kHz audio to capture every subtle detail of your performance.

The included Pantheon II VST/AU reverb plug-in features 6 reverb types with 16 adjustable parameters, as well as 35 factory presets that range from Vocal to Live Sound and Special Effects. It's easy to complete your mix and make your music sound its best with these exquisitely rich, full reverbs that have made Lexicon the world leader in digital reverbs.

Also included with the Lexicon I&bull:ONIX U22 is a software suite featuring Steinberg's Cubase LE4 and Toontrack EZdrummer Lite.

  • USB 2.0 connection to DAW”up to 480Mbps
  • 44.1 to 96KHz sample rates, 24-bit resolution
  • 2 Analog 1/4" and XLR combi-jack inputs on the rear panel for mic/line inputs
  • 2 Analog 1/4" TRS (Stereo Main) outputs
  • 2 dbx high-voltage, ultra-low noise mic preamp's on all analog mic/line inputs (2 total)
  • 1 Hi-Z instrument input
  • Supports Windows and Mac platforms
  • 48V phantom power for each input pair
  • Input signal metering via 8 LED's per channel
  • Signal mixing and stereo bus signal metering
  • 1/4" high-output headphone connection
  • MIDI In/Out
  • Zero-latency monitoring
  • Low-latency ASIO drivers
  • Lexicon Pantheon II VST/AU reverb plug-in
  • Software suite includes Steinberg's Cubase LE4, and Toontrack

I-ONIX U22 USB 2.0 Audio/MIDI Interface Specifications:

  • Microphone Inputs: Female XLR Pin 2 Hot
    Input Impedance: 3kÎ balanced
    Phantom Power: +48 Volts
    Maximum gain: +55dB
    E.I.N. (at max gain): 127dB @ 55dB gain typical (150Î source), 130dB @ 55dB gain typical A-weighted (150Î source)
    Maximum Input Level: +8dBu
    Frequency Response: +/ 1.5dB, 20Hz-20kHz
    THD+N: <0.02%, 20Hz-20kHz, <0.002%, 1kHz, -6dBu
    Line Inputs: 1/4" TRS balanced or unbalanced
    Input Impedance: 20kÎ balanced, 13kÎ unbalanced
    Maximum Input Level: +18dBu
    Frequency Response: +/ 1.5dB, 20Hz-20kHz
    THD+N: <0.02%, 20Hz-20kHz, <0.002%, 1kHz, +18 dBu
    Instrument Input: 1/4" TS unbalanced
    Input Impedance: 1MÎ
    Maximum Input Level: +10dBu
    Frequency Response: +/ 2.5 dB, 20Hz-20kHz
    THD+N: <0.08%, 1kHz, +4dBu
    Line Outputs: 1/4" TRS balanced or unbalanced
    Level: +18dBu maximum
    Impedance: 32Î Balanced, 16Î Unbalanced
    Headphone Output: 1/4" stereo jack 250mW per channel at 50Î
    MIDI Interface: 5-pin DIN connectors for MIDI in and MIDI out
    Sample Rate: 44.1, 48, 88.2, or 96kHz (determined by computer application)
    Dynamic Range: A/D (24 Bit) 108dB typical, A-weighted, 20HZ-20kHz
    D/A (24 Bit) 110dB typical, A-weighted, 20Hz-20kHz
    A/D/A (24 Bit) 106dB typical, A-weighted, 20Hz-20kHz
    Power requirements: Power adaptors for 100”240 VAC, 50/60Hz, 15W
review resources