Perfect for home studios, church PA systems, and guitar, bass, or keyboard racks, any application not requiring balanced jacks.
Perfect for home studios; DJ systems; PA systems; nightclub sound; guitar, bass, or keyboard racks; and any application not requiring balanced jacks. The 482i Sonic Maximizer provides either stereo processing or processing for 2 separate mono channels; brightening, clarifying, and adding fullness to the sound. Features 5-segment LED output meters, +18dBu headroom, RCA and 1/4" inputs and outputs, and a bypass switch for comparison of processed-to-unprocessed signal. Occupies 1 rack space.
- Pro and semi-pro sound reinforcement
- Multitrack studios
- Mobile DJ systems
- Cassette copies
- Nightclub sound systems
- Instrument racks for guitar, bass, and keyboards
- 2 channels of processing for stereo or separate mono mixes
- 5 segment LED output meters
- +18dBu headroom
- RCA and 1/4" inputs and outputs
- Hardwire bypass
Groom and tweak your sound to the limits of your creativity and taste! Order today and save!
482i Sonic Maximizer Specifications:
- Frequency Response
Process Mode: Program controlled
Bypass Mode: 10Hz to 50kHz, +/- 0.5dBu, 10dBu input
Signal to Noise Ratio: 112dB Process IN
THD, Process mode: less than 0.025% at 20-20kHz
Bypass mode: less than 0.002% at 20-20kHz
Maximum Output: +18dBu (may vary due to control settings)
Input Impedance: 47kOhms, unbalanced 1/4" phone jack or RCA jack.
Output Impedance: 1kOhms, unbalanced 1/4" phone jack or RCA jack.
Sensitivity: -45dBu for maximum process
Maximum Process: +12dBu boost at 5kHz, -10dBu input
Lo Contour: +12dBu adjustment at 50Hz, -10dBu input
REVIEW SNAPSHOT®by PowerReviews
Reviewed by 1 customer
Displaying review 1
Comments about BBE 482i Sonic Maximizer:
A must have for any rig. These are not equalizers. It analyzes your signal/tone and fixes it on the fly. It brightens, clarifies, and adds fullness to the sound. Do you have a tone in your head that you're trying to replicate? Put this in your signal chain and stop worrying about your tone, it's fixed. Guitar chords with distortion now ring though instead of "muddying-up."
I have always used Marshall combos, but some lack the punch/clarity of full/half stacks. This will correct that. Gives you the bass you can feel and full tone you've been lacking. Currently use it in all my setups, and just can't do without it. No manual needed to learn. Process IN/OUT button, low contour know, and high contour knob. Put both on 5 or 6 and you'll be amazed. Need more/less, just tweak it. Now hit the process IN/OUT (bypass switch) to see how much better your tone is. Also has RCA inputs/outputs for use in home theater systems.
This one has an (A) channel and a (B) channel, so you can share with you friend. You'll only need one unless you run a complex stereo setup, which most of us don't.
Note: I have tried the BBE stompbox versions of this and they fall short in the effects chain. Get this one and put it in your effects loop instead. Every stompbox that has a TONE knob or EQ compromises your tone. Stay away from those. Your guitar and amp already has TONE knobs for that, so keep it simple.