Skip to main content Skip to footer

 
Audio-Technica BP892-TH MicroSet Headworn Microphone with Power Module  Beige 

(Beige)  Sku #485622000002000

45 day price guarantee, 45 day return policy, 100% secure shopping

$399.00 Finance Now!

In Stock & Ready to Ship

Most orders placed before noon ET ship same day (except weekends and holidays)

This oversized item has special shipping requirements

Restrictions

Platinum Coverage: (What’s This?)
Add to list
See All Audio-Technica Wireless System Components
Audio-Technica

A headworn condenser mic with omnidirectional
polar pattern providing natural audio.

Audio-Technica's high-SPL BP892-TH MicroSet mic with power module offers you high-quality, low-profile, high-performance audio. Delivering clear-and-accurate sound in an inconspicuous package, the ultra-lightweight BP892-TH headworn mic hooks securely behind either ear and can be worn for hours without fatigue. For maximum stability and comfort, the included AT8464 dual-ear microphone mount converts the Audio-Technica MicroSet to a dual-ear-worn mic.

The Audio-Technica BP892-TH's headset microphone features a flat, extended frequency response and other outstanding performance specifications, resulting in extremely intelligible, natural audio for stage and television talent, lecturers, and houses of worship. Protected by a highly durable Parylene coating, this headworn mic is built to stand up to the rigors of day-to-day use.

The Audio-Technica BP892-TH headworn microphone comes in beige with a choice of the following:

Unterminated: 55" (1.4m) unterminated cable

Lemo/M180 connector: 55" (1.4m) cable terminated for Sennheiser wireless systems using Lemo connector

3.5 mm connector: 55" (1.4m) cable terminated for Sennheiser wireless systems using locking 3.5mm connector

TA4F connector: 55" (1.4m) cable terminated with TA4F connector for Shure wireless systems

TA5F connector: 55" (1.4m) cable terminated with TA5F connector for ATW-U101 and Lectrosonics wireless systems

HRS connector: 55" (1.4m) cable terminated with locking 4-pin connector for A-T UniPak wireless systems

Consumer Alert:

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.

FEATURES
  • Handles high sound pressure levels with ease
  • Extremely intelligible natural audio
  • Inconspicuous, lightweight headset with capsule diameter of just 2.6mm is ideal for applications requiring minimum visibility
  • Ergonomic under-ear design”flexible, lightweight contoured loop hooks behind the ear for an ultra-secure, comfortable fit with or without glasses
  • Microphone comes equipped with AT8464 Dual-Ear Microphone Mount that converts single ear-worn MicroSet to a dual-ear-worn mic for maximum stability and comfort
  • High-pass filter on power module provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • Includes AT8539 power module
 

BP892-TH MicroSet Headworn Microphone with Power Module Specifications:

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar pattern: Omnidirectional
  • Frequency response: 20-20,000Hz
  • Low frequency roll-off: 80Hz, 18dB/octave
  • Open circuit sensitivity: -49dB (3.5 mV) re 1V at 1 Pa
  • Impedance: 250 ohms
  • Maximum input sound level: 135dB SPL, 1kHz at 3% T.H.D.
  • Dynamic range (typical): 104dB, 1kHz at Max SPL
  • Signal-to-noise ratio: 63dB, 1kHz at 1 Pa
  • Phantom power requirements: 11-52V DC, 2 mA typical
  • Switch: Flat, roll-off
  • Weight:
  • Microphone, boom & earpiece - 2.6g/0.09oz
  • Power module: 85g (3.0oz.)
  • Dimensions:
  • Microphone: 8.1mm (0.32") long, 2.6mm (0.10") diameter
  • Boom: 98.4mm (3.87") long, 1.07mm (0.04") diameter
  • Power module (wired only): 97.6mm (3.84") long, 18.9mm (0.74") diameter
  • Output connector (power module): Integral 3-pin XLRM-type
  • Cable: 1.4m (55") long (permanently attached to microphone), 1.6mm (0.06") diameter, 2-conductor shielded cable with locking, 4-pin connector
  • Audio-Technica case style: M31
  • Accessories furnished:
  • AT8539 power module;
  • AT8440 cable clip; two AT8157 windscreens; two AT8156 element covers; moisture guard; belt clip; carrying case
review resources
Loading....