Audio-Technica AT831cT4 Cardioid Condenser lav wired for Shure w/o power supply  

Sku #H73903000000000

45 day price guarantee, 45 day return policy, 100% secure shopping

Audio-Technica

Professional quality lavalier microphone for Shure wireless systems.

The Audio-Technica AT831cT4 is an affordable, reliable, great-sounding condenser microphone designed for use with Shure wireless systems. It is a favorite among worship leaders, corporate presenters, auctioneers, and others who need to amplify their voice in public speaking environments.

This model is equipped with a TA4F-type connector that fits most Shure wireless microphone systems, and includes a clothing clip, windscreen and a 55" cable.

Consumer Alert:

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.

FEATURES
Crisp, full-sounding voice pickup
High gain before feedback
Excellent suppression of background noise
Rugged construction

Order now and make sure your message comes across loud and clear.

 

AT831cT4 Cardioid Condenser lav wired for Shure w/o power supply Specifications:

ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 40-16,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITY -42 dB (7.9 mV) re 1V at 1 Pa
IMPEDANCE 250 ohms
MAXIMUM INPUT SOUND LEVEL 141 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (TYPICAL) 112 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 65 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical
SWITCH Flat, roll-off
WEIGHT (MICROPHONE) 0.1 oz (2.8 g)
WEIGHT (POWER MODULE) 2.9 oz (81 g)
DIMENSIONS (MICROPHONE) 0.98" (25.0 mm) long,
0.40" (10.2 mm) diameter
DIMENSIONS (POWER MODULE) 3.66" (92.9 mm) long,
0.74" (18.9 mm) diameter
OUTPUT CONNECTOR (POWER MODULE) Integral 3-pin XLRM-type
CABLE 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor, shielded cable with TA3F-type connector

review resources
Loading....