Alto RMX508DFX 500W Powered Mixer with Effects  

Product #H99461

45 day price guarantee, 45 day return policy, 100% secure shopping

Unavailable

Item Note:

This product has been discontinued but may be available as a Open Box item.

Similar Items

See All Alto Powered Mixers
Alto

Powered speaker with extra features.

The EMPIRE RMX508DFX is a 500W powered mixer with effects and EQ that includes everything you need to tackle virtually any live performance. It starts with an ultra-clean 500 watts of Class D power to drive your speakers of choice. Class D amplification makes the RMX508DFX not only powerful but incredibly light compared to other solutions. Running the RMX508DFX in stereo will deliver a continuous 2 x 250W at 4 ohms of pure, clean power.

The RMX508DFX features 18 total inputs including eight XLR jacks with phantom power, eight line jacks and stereo RCA. This means that whether you're plugging in guitars, mics, keyboards or even an iPod for playback between sets, you're covered with the RMX508DFX.

Once everything is connected, there's a full onboard digital effects processor and 3-shelf EQ on each mono and stereo channel so you can dial in the perfect sound at any venue. A 24-bit, built-in Alesis DSP effects engine supplies ample options for sweetening including Hall, Room, Vocal & Plate reverbs, Mono & Stereo delay (max delay time 650ms), Chorus, Flanger & Reverb modulations, Reverb+Delay, Reverb+Chorus and Reverb+Flanger combinations. 256 different Alesis DSP presets provide ample options for any situation. When the gig is done, inset, molded handles on both ends make it super easy to transport.

FEATURES
  • 18 total inputs including eight XLR jacks with phantom power, eight line jacks and stereo RCA
  • On-board digital effects processor and 3-shelf EQ on each mono and stereo channel
  • Continuous 2 x 250W power at 4 ohms; 500W at 8 ohms Bridged
  • Class D Power for clean power and lightweight
  • Built-in, recessed handles for easy transport

Make the professional choice for a portable mixer with the EMPIRE RMX-series. Order today.

 

RMX508DFX 500W Powered Mixer with Effects Specifications:

  • Mono input channels
  • Microphone input: Electronically balanced, discrete input configuration
  • Frequency response: 10Hz to 55kHz, +/“3dB
  • Distortion: (THD & N) 0.006% at +4dBu, 1kHz
  • Gain: 50dB (MIC)
  • SNR: (Signal to Noise Ratio) >90dB
  • Line input: Electronically balanced
  • Frequency response: 10Hz to 55kHz, +/“3dB
  • Distortion: (THD & N) 0.04% at +4dBu, 1kHz
  • Gain: 30dB
  • Stereo input channels
  • Line input: Unbalanced
  • Frequency response: 10Hz to 55kHz, +/“3dB
  • Distortion: (THD & N) 0.006% at +4dBu, 1kHz
  • Impedances
  • Microphone input: 1.4kOhm
  • Channel Insert return: 2.5kOhm
  • All other inputs: 10kOhm or greater
  • Tape out: 1kOhm
  • All other output: 120Ohm
  • Equalization
  • Hi shelving: +/“15dB @12kHz
  • Mid bell: +/“15dB @2.5kHz
  • Low shelving: +/“15dB @ 80Hz
  • Alesis DSP Section
  • A/D and D/A converters: 24-bit
  • DSP resolution: 24-bit
  • Type of effects
    • Hall, Room, Vocal & Plate REVERBS
    • Mono & Stereo DELAY (max DELAY TIME 650ms)
    • Chorus, Flanger & Reverb MODULATIONS
    • REVERB+DELAY, REVERB+CHORUS,
    • REVERB+FLANGER combinations
    • Presets: 256
    • Controls: 16-position PRESET Selector;16-position VARIATION selector
    • CLIP LED; MUTE SWITCH with LED indicator
    • UNITY gain:“71dBr (ref.:+4dBu)
    • Max output: +27dBu balanced, +22dBu unbalanced, 1/4" jacks
    • AUX Sends max out: +22dBu
    Power supply Main voltage
    • 100-120VAC 60Hz
    • 220-240VAC 50Hz
    • Fuse 100 120V : T6.3AL
    • 210 240V : T3.15AL
    Stereo mode
    • 230 W @ 4 ohm(RMS) THD=1%
    • 150 W @ 8 ohm(RMS) THD=1%
    • Bridge mode 460 W @ 8 ohm(RMS) THD=1%
    • Physical Dimension (W—D—H) 550mm — 220mm — 310mm(8.66" — 12.20" — 21.65")
    • Weight: 28.7lb.
    review resources
    Loading....