Skip to main content Skip to footer

Alto RMX2408 DFX 2000W Powered Mixer with FX  

Product #H92557

45 day price guarantee, 45 day return policy, 100% secure shopping


Item Note:

This product has been discontinued but may be available as a Open Box item.

Similar Items

See All Alto Powered Mixers

Light, rugged and powerful.

The Alto RMX2408DFX is a 2000 watt powered mixer with EQ and effects. It features 2000 watts of Class D power. Class D amplification makes the RMX2408DFX not only powerful but also incredibly light compared to other solutions.

The RMX2408DFX also features a useful array of tools including 8 XLR jacks with phantom power, 8 Line jacks and stereo RCA. This means that whether you're plugging in guitars, mics, keyboards or even an iPod for playback between sets, you're covered with the RMX2408DFX .

Once everything is connected, there's a full on-board digital effects processor and 3-shelf EQ on each mono and stereo channel so you can dial in the perfect sound at any venue. A 24-bit, built-in Alesis DSP effects engine supplies ample options for sweetening including Hall, Room, Vocal & Plate reverbs, Mono & Stereo delay (max delay time 650ms), Chorus, Flanger & Reverb modulations, Reverb+Delay, Reverb+Chorus and Reverb+Flanger combinations. 256 different Alesis DSP presets provide ample options for any situation. When the gig is done, inset, molded handles on both ends make it super easy to transport.

  • Lightweight and ruggedly built
  • 18 total inputs
  • 8 XLR jacks with phantom power
  • On-board digital effects processor
  • 3-shelf EQ on each mono and stereo channel
  • Continuous 2 x 1000W at 8 ?

Order today and get your mixing, processing and power in a single box.


RMX2408 DFX 2000W Powered Mixer with FX Specifications:

  • Microphone input: Electronically balanced, discrete input configuration
  • Frequency response: 10Hz to 55kHz, +/“3dB
  • Distortion: (THD & N) 0.006% at +4dBu, 1kHz
  • Gain: 50dB (MIC)
  • SNR: (Signal to Noise Ratio) >90dB
  • Line input
  • Electronically balanced
  • Frequency response: 10Hz to 55kHz, +/“3dB
  • Distortion: (THD & N) 0.04% at +4dBu, 1kHz
  • Gain: 30dB
  • Stereo input channels
  • Line input: Unbalanced
  • Frequency response: 10Hz to 55kHz, +/“3dB
  • Distortion: (THD & N) 0.006% at +4dBu, 1kHz
  • Impedances
  • Microphone input: 1.4kOhm
  • Channel Insert return: 2.5kOhm
  • All other inputs: 10kOhm or greater
  • Tape out: 1kOhm
  • All other output: 120Ohm
  • Equalization
  • Hi shelving: +/“15dB @12kHz
  • Mid bell: +/“15dB @2.5kHz
  • Low shelving: +/“15dB @ 80Hz
  • Alesis DSP Section
  • A/D and D/A converters: 24-bit
  • DSP resolution: 24-bit
  • Type of effects
  • Hall, Room, Vocal & Plate Reverb
  • Mono & Stereo DELAY (max delay time 650ms)
  • Chorus, Flanger & Reverb Modulations
  • Reverb+Delay, Reverb+Chorus,
  • Reverb+Flanger combinations
  • Presets: 256
  • Controls
  • 16-position PRESET Selector; 16-position VARIATION selector
  • CLIP LED; MUTE SWITCH with LED indicator
  • Main Mix Section
  • Noise: (Bus Noise) Fader 0 dB, channels muted:“85dBr (ref.:+4dBu)
  • Fader: 0dB, all input channels assigned and set to
  • UNITY gain:“71dBr (ref.:+4dBu)
  • Max output: +27dBu balanced, +22dBu unbalanced, 1/4" jacks
  • AUX Sends max out: +22dBu
  • Output power
  • 500Wx2+500Wx2 mode 480Wx4(EIAJ) @ 4ohm,
  • 224Wx4(EIAJ) @ 8ohm
  • 1000Wx1+1000Wx1 mode976Wx2(EIAJ) @ 8ohm
  • 500Wx1(R)+500Wx1(L)+1000W(MONO) mode521Wx2(EIAJ) @ 4ohm+937Wx1(EIAJ) @8 ohm
  • Bridge mode1553W @ 8ohm
review resources