Be the master of MIDI onstage.
The FC-300 sets a new standard of power, versatility and innovation for MIDI foot control. With features such as bi-directional MIDI data flow to the Roland VG-99 via RRC2, patch memory recall, twin expression and control pedals and more, this advanced control station is a perfect companion for Roland's VG-99 V-Guitar System or any other performance-based MIDI instrument or device.
Advanced MIDI foot controller with two assignable expression pedals, two control pedals, nine footswitches and expandability
New Patch Mode stores up to 100 MIDI setups
In addition to standard MIDI connection, advanced RRC2 protocol adapted for bidirectional data flow between FC-300 and Roland RRC2-equipped products
3-way power supply and rock-solid metal construction for stage use
Two Amp Control switches for controlling amp channels or effects
Perfect companion for the VG-99
- RRC2, Bi-directional MIDI data flow
- 2 expression/control pedals
- 9 footswitches
- 100 MIDI setups
- 3-way power supply
- Metal construction
Be a guitar MIDI master! Order today.
REVIEW SNAPSHOT®by PowerReviews
Reviewed by 1 customer
Displaying review 1
Comments about Roland FC-300 MIDI Footswitch Controller:
The FC-300 MIDI foot controller is a rugged floorboard that gives you complete realtime control over all your MIDI devices. If you're familiar with Rolands older V-Bass or V-Guitar floor modules, or their GT series effects processors, you know the basic physical layout of this unit, and the quality and durability of its parts. There are no flimsy plastic components, and you'd have to work really hard to do any damage to its tough metal chassis.
The two Expression Pedals have very smooth travel and output evenly throughout their full range. Theres just enough resistance to allow the pedal to stop securely at any point along its excursion, great if you want to capture a particular filter notch in a wah or synth, or the sweet spot in a volume sweep. In fully depressed position, there are on/off switches that are easy to access without putting all your weight on them, and yet they will not switch too easily so you don't have to worry about accidentally switching them on or off. The two Control Pedals can be set for latch or momentary operation. The Expression and Control Pedals are each assignable to virtually any two controllable parameters. There are two Mode Pedals, generally intended as Bank Up and Down controls, or to switch between Modes when depressed simultaneously. There are five Patch Pedals, each of which can select two patches within any bank. Depending on which of the four Modes is selected (standard, control, sys ex, or patch) each of the pedals can be assigned somewhat different if related functions.
All pedals have associated lights to let you know exactly whats currently engaged. The two-line LCD allows for 16 characters per row, so you can have a pretty thorough designation for each selected patch. The variable intensity lighting in the LCD display insures that the characters are clear and easy to read in any lighting.
If you need more control, the FC-300 has three additional jacks for connecting external Expression or Control Pedals, and a dedicated Mode jack for a pedal just to switch among Modes. There are even Amp Control jacks so you can switch between amp channels and their effects if your amp allows for that. Because this is a MIDI controller, of course there are MIDI in and out jacks too!
The FC-300 has an onboard memory of 8 KB, and is capable of storing 100 separate Patches. If you have a very extensive MIDI set-up and somehow need more than 100 onboard Patches, that may be the only limitation you'll find with this controller. Full disclosure, this is more than Ive attempted with mine so far, but thats on the horizon. While a full-featured MIDI controller able to work with all MIDI devices, the FC-300 is optimized for both the VG-99 and the VB-99, and communicates with them so seamlessly that all programming is effortless and automatic. Ive only used mine with the VB-99, and I couldn't be happier with just how transparently easy it is to use, and how perfectly all the functions perform. No need to be fluent in MIDI if thats your main use for this. The FC-300 can be powered by an external power supply or internal batteries, but as an additional bonus when connected to the VB-99 through Rolands RRC2 cable (their proprietary CAT5 cable), it derives all its power from that. That eliminates the need for a separate power cord or MIDI cables to the VB-99 too, helping to minimize stage or studio clutter.
The FC-300 isnt a sexy device, but its an extraordinarily functional one and will make your life a lot easier. Packed with features, as versatile as you could want, expandable with external pedals, and built solidly enough to withstand all the rigors of the road, Roland got this one exactly right.