No more tap dancing!
The Z-12 MIDI Footcontroller from Engl lets you access 128 MIDI program locations (01 - 128). Program selection can be executed via any of the 16 specified MIDI channels (Poly 1-16). It is equipped with several practical features that facilitate utilitarian, comfortable handling. 12 buttons enable direct access to all program locations within a bank. Autocounting enables you to access banks that are located greater distances from the currently active program (e.g. switching from Program Location 04 to Program Location 78) without requiring a great deal of tap dancing. Simply hold down the up or down buttons until you scroll to the desired bank. Autostop ensures the original bank is not bypassed so that you can quickly return to it if desired. The right display numeral flashes (01 position) when the bank of the current Program Location is exited and lets you know that you must enter the one position for the newly selected bank to activate the desired MIDI program location.
When you connect it to the ENGL MIDI Interface Z-7 or the ENGL Switcher Z-11 (both sold separately), the Z-12 footcontroller is supplied with power via the MIDI connector cable. In other words, you no longer need a separate power supply cord, only the MIDI control cable that connects the footcontroller to your setup.
- Rugged steel chassis
- Switches all MIDI program changes
Z-12 MIDI Footcontroller Specifications:
- Maximum power consumption: approx. 100 mA. Alternative power supply via MIDI cable Pin 1 and Pin 2
System: Controller At 89C51 with internal 4k Flash memory for software (protected, 12 MHz system clock)
Dimensions: 50 x 15 x 5 cm
Weight: approx. 3 kg