Ashdown MAG C210T-300 EVO III Combo Amp  

Product #H87392

45 day price guarantee, 45 day return policy, 100% secure shopping


Item Note:

This product has been discontinued but may be available as a Open Box item.

Similar Items

See All Ashdown Solid State Combo Bass Amplifiers

A 300W 2 x 10" combo that can handle any setting from small gigs to the studio.

At the heart of the MAG C210T-300 EVO III combo lies a feature-packed bass preamp with rotary bass, middle and treble controls, along with supplementary rotary controls providing 15dB of cut and boost at 220Hz and 1.6kHz. Additionally, front panel push switches for Bright and Deep settings provide instant access to attacking and warm, rounded sounds respectively and, on the subject of low-end response, the trademark Ashdown sub-harmonic generator is ready and able to deliver truck loads of earth moving tone if called upon.

With the MAGs now achieving EVO III status, the amplifier also includes a built-in compressor with precision sonic control. Along with the all new tube emulated drive control for that extra bit of grind with your tone.

Fueled by a potent 300W power section, C210T-300 EVO III combo features inputs for active and passive instruments, along with an effects send and return, a tuner/line output and a balanced DI output for direct connection to a mixing console.

The combo delivers its payload via a pair of 10" drivers, supplemented by a high-frequency tweeter for even greater top-end bite.

2 - 10" Speakers
300W Power section
5 band EQ
Rotary bass, middle and treble controls
Overdrive control with footswitch control
Effects send and return
Tuner/line output
Balanced DI output

Fill the air with Ashdown. Order today!


MAG C210T-300 EVO III Combo Amp Specifications:

Power Output: 307W
Power Requirement: 230 / 115V
Speaker Configuration: 2 x 10" BlueLine speaker + tweeter
Frequency Response: -3dB at 17Hz and 30KHz
Speaker Outputs: 2 x Jack Outputs
High Instrument Input: Impedance 3.9MOhms / Input range 150mV - 20V p-p
Low Instrument Input: Impedance 10KOhms / Input range 300mV - 40V p-p
Line Input: Impedance 22k Ohms / Input level 0dBu nominal
DI Output: 600 Ohms balanced / Level -20dBu nominal
Tuner Output: Impedance 22k Ohms, level 0dBu nominal
Impedance: 8 ohm
Output Impedance: Minimum 4 ohm
Signal to noise: Better than 80dB (EQ flat)
EQ: Bass +/-15dB @ 100Hz
Lo Mid +/-15dB @ 220Hz
Middle +/-15dB @ 660Hz
Hi Mid +/-15dB @ 1.6kHz
Treble +/-15dB @ 7kHz shelving
Deep +8dB @ 50Hz
Bright +10dB @ 10kHz
Effects Send: Impedance 22k Ohms, level 0dBu nominal
Effects Return: Impedance 22k Ohms / Level 0dBu nominal
Distortion: Less than 0.5% THD
Dimensions (W x H x D): 24" x 22.9" x 13.2"
Weight: 77.2 lb.
review resources