Skip to main content Skip to footer

Ashdown ABM-1000 EVO III 1000W Bass Head  

Product #H87393

45 day price guarantee, 45 day return policy, 100% secure shopping

Unavailable

Item Note:

This product has been discontinued but may be available as a Open Box item.

Similar Items

See All Ashdown Solid State Bass Amplifier Heads
Ashdown

An Ashdown favorite rebooted and retooled to suit any player's needs.

The new ABM 1000 head pairs the much loved ABM Evo 3 pre amp with a monstrously powerful Class D power section resulting in a huge increase in power coupled with a dramatic reduction in weight. Whilst the same size as an ABM 500 head the ABM 1000 produces 1000 watts RMS into one 4 ohm/2 x 8 ohm outputs(2000 watts peak) and weighs in at only 21 lb.

The ABM 1000 EVO III is a 1000W RMS bass amp head designed to satisfy both bass-purists and tech-heads alike. Three straightforward rotary tone controls provide 20dB of cut and boost at 60Hz, 660Hz and 5kHz, and are supplemented by two pairs of additional sliders giving 15dB cut and boost at 180Hz, 340Hz, 1.3kHz and 2.6kHz. The EQ can be switched in/out by a footswitch, enabling players to go from a flat fretless sound to a boosted sound via a favorite EQ setting. A single input is switchable for passive and active instruments with a blend of solid state and dual triode tube preamps stages that can be preset and selected by footswitch, providing access to a massive range of clean, warm and overdriven tones.

Also footswitchable is the on-board compressor and the mighty Ashdown sub-harmonic generator that precisely tracks the main signal and reproduces it an octave lower. A sub-harmonic level control enables the player to add just the right amount of low-end reinforcement - everything from a subtle, thickening of the sound to unbridled, bone crushing tone. The ABM 1000 EVO III features a front-panel mounted balanced DI out with pre or post EQ switching, a tuner output, an FX loop and a line input for the connection of an external sampler or sound source. Output muting cuts the signal from the DI output but leaves the tuner output 'live', allowing the player to tune up in silence. A newly developed Class D power section has a fast transient attack, massive headroom and makes this the lightest ABM head yet.

FEATURES
Valve Drive
7-band EQ
Built-in Sub-Harmonics
On-board compressor
1000W Power output
2000W Peak power handling
12AX7 Preamp tubes
-3DB at 17HZ and 30KHZ frequency response
Speakon/jack speaker outputs
4 OHMS
Tuner

Fill the air with Ashdown. Order today!

 

ABM-1000 EVO III 1000W Bass Head Specifications:

High instrument input: Impedance 3.9M OHMS
Low instrument input: Impedance 10K OHMS
Line input: Impedence 22K OHMS
Line output: Impedence 10K OHMS
600 OHMS balanced DI output
Tuner output: Impedence 1K OHMS
Effects send: Impedance 22K OHMS
Effects return: Impedance 22K OHMS
Dimensions: 5.27"x18.66"x12.4"
Weight: 21.1 lb.
review resources
Loading....