Radial Engineering Radial Engineering SB-48UB Phantom Power Supply for Instrument Microphones
Pro Audio Power Supplies
- Write a Review
45 day price guarantee, 45 day return policy, 100% secure shopping
Properly powers your condensor mic.
The Radial SB-48UB is a unique 48V phantom power supply that enables the artist to power a condenser microphone and then send the balanced signal into the unbalanced input of a guitar amplifier or effect pedal like a Radial PZ-Pre acoustic preamp.
The challenge when using a condenser microphone with a preamp pedal or stage amp is that most of these only have unbalanced inputs. As most phantom power supplies are only equipped with balanced inputs and outputs, making a proper connection is often difficult or impossible due to the impedance and level mismatch.
The SB-48UB is a single-channel phantom power generator that converts the power from a 15VDC supply to 48 volts for use with a condenser microphone. The SB-48UB converts the signal to both a Lo-Z balanced XLR output and a Hi-Z unbalanced 1/4" output. Both outputs may be used concurrently whereby the XLR could feed the PA while the 1/4" out could feed a stage amp or pedal board.
- Circuit type: Non-radiating phantom power supply
- Number of channels: 2
- XLR connectors: AES standard pin-1 Ground, pin-2 (+), pin-3 (-)
- Phantom output: Switchable +48 / +12 volts DC
- Power supply: 15VDC / 400mA external supply included
Order this phantom power supply for your mic today!