Skip to main content Skip to footer

 
Eminence Legend 1058 10 In Guitar Speaker  

Sku #660088000000000

FREE SHIPPING on Almost Everything

Top Rated

$64.99 Special Promotions
  1. Top Rated

In Stock & Ready To Ship

Restrictions Apply (Details)

Add to list
See All Eminence Speakers for Instrument Amps
Eminence

The Eminence Legend 1058 10" Guitar Speaker has a very meaty tone, but with sparkle, definition and a smooth top-end. This Eminence Legend speaker is great for blues, country and rock. High power, vintage, seamed cone tonality for guitar. It's an ideal Vintage alnico Jensen replacement speaker.

FEATURES
  • Voice Coil Diameter: 1.5", 38.1mm
  • Magnet Weight: 16 oz.
  • Power Rating.: 75W
  • Sensitivity: 98.7

Put this Eminence speaker in the cart.

 

Legend 1058 10 In Guitar Speaker Specifications:

  • Nominal Basket Diameter: 10", 254mm
  • Nominal Impedance: 8 ohms
  • Power Rating*: 75W
  • Resonance: 97Hz
  • Usable Frequency Range: 100Hz-6kHz
  • Sensitivity**: 98.7
  • Magnet Weight: 16 oz.
  • Thiele & Small Parameters
  • Resonant Frequency (fs): 97Hz
  • DC Resistance (Re): 7.49
  • Coil Inductance (Le): 0.56mH
  • Mechanical Q (Qms): 17.78
  • Electromagnetic Q (Qes): 1.21
  • Total Q (Qts): 1.13
  • Compliance Equivalent Volume (Vas): 26.4 liters / 0.9 cu. ft.
  • Peak Diaphragm Displacement Volume (Vd): 0cc
  • Mechanical Compliance of Suspension (Cms): 0.16mm/N
  • BL Product (BL): 8.0 T-M
  • Diaphragm Mass inc. Airload (Mms): 17 grams
  • Efficiency Bandwidth Product (EBP): 80
  • Maximum Linear Excursion (Xmax): 0.0mm
  • Surface Area of Cone (Sd): 344.9 cm2
  • Mounting Information
  • Recommended Enclosure Volume:
  • Sealed: Acceptable
  • Vented: Acceptable
  • Overall Diameter: 10.11", 256.8mm
  • Baffle Hole Diameter: 9.13", 231.8mm
  • Front Sealing Gasket: fitted as standard
  • Rear Sealing Gasket: fitted as standard
  • Mounting Holes Diameter: 0.23", 5.7mm
  • Mounting Holes B.C.D.: 9.6", 243.8mm
  • Depth: 4.1", 104mm
  • Net Weight: 4.4 lbs., 2 kg
  • Shipping Weight: 5.4 lbs., 2.5 kg
  • Materials of Construction
  • Copper voice coil
  • Polyimide former
  • Ferrite magnet
  • Non-vented core
  • Pressed steel basket
  • Paper Cone
  • Paper cone edge
  • Solid composition felt dust cap
  • * Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, non-temperature controlled environment.
  • **The average output across the usable frequency range when applying 1W/1M into the nominal impedance. Ie: 2.83V/8ohms, 4V/16ohms.
  • Eminence response curves are measured under the following conditions: All speakers are tested at 1w/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle | 2ft. X 2ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu.ft. chamber with
  • fiberglass on all six surfaces (three with custom-made wedges)
review resources
Loading....