Shure PGX2/BETA58 Wireless Handheld TransmitterProduct #270730 Shure 270730 YNBE Wireless System Components https://www.esnapw.com/rses/ESnapServlet?MerchantNumberSent=63655
- Write a Review
- Seen a Lower Price? Click Here.
45 day price guarantee, 45 day return policy, 100% secure shopping
- Buy New
The Shure PGX2/BETA58 Wireless Handheld Transmitter is comprised of the PGX2 transmitter fitted with the Beta 58 Supercardioid microphone cartridge. The Shure PGX2 transmitter features a multi-function status LED (power, lockout, mute and low battery), automatic transmitter setup, power and mute switch, and has an operating range of 300 ft. It operates on two "AA" size batteries.
The Beta 58A microphone accentuates the warmth and clarity of lead and backup vocals. Its supercardioid design provides maximum isolation from other onstage sounds. Shure professional audio products deliver legendary sound quality, stage-proven durability and hassle-free setup for worry-free performance.
Consumer Alert:Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.
- PGX2 Handheld Transmitter
- Automatic Transmitter Setup
- Multi-function LED Indicator (power, lockout, mute, low battery)
- 300 ft. (92 m) operating range
- Beta 58A Microphone Cartridge
- Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
- Uniform supercardioid pattern for high gain before feedback and superior rejection of off”axis sound
- Neodymium magnet for high signal”to”noise output
- Hardened steel mesh grille that resists wear and abuse
- Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
PGX2/BETA58 Wireless Handheld Transmitter Specifications:
- PGX2 Handheld Transmitter
Audio Input Level: +2 dBV maximum at ”10dB position; ”8 dBV maximum at 0dB position
Gain Adjustment Range: 10dB
RF Transmitter Output: 30 mW typical (dependent on applicable country regulations)
LED Status Indicator: Green - Ready; Flashing Green - Controls locked; Amber - Mute on; Flashing Red on startup - Battery is dead; Glowing Red - Battery power low; Pulsing Red after synchronization - transmitter and receiver incompatible; contact your Shure reseller
Dimensions (Length x Diameter) : 10 in. x 2 in (254 x 51 mm)
Weight: 10.2 oz. (290 grams) without battery
Housing: Molded ABS plastic handle and battery cup
Power Requirements: Two "AA" size or rechargeable batteries
Battery Life: >8 hours (alkaline)
Beta 58A Microphone Cartridge
Type: Supercardioid, Dynamic (moving coil)
Frequency response: 50 to 16,000 Hz
Neodymium magnet for high signal”to”noise output
Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency.
Output Level (at 1,000 Hz): Open Circuit Voltage: -51.5 dBV/Pa* (2.6 mV)
*1 Pa = 94 dB SPL
Impedance: Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z Phasing. Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3.