Audio-Technica BP892 MicroSet Headworn Microphone with Power Module - Black
Wireless System Components
- Write a Review
- Seen a Lower Price? Click Here.
45 day price guarantee, 45 day return policy, 100% secure shopping
Headworn condenser mic with omnidirectional
polar pattern for intelligible natural audio.
Audio-Technica's high-SPL BP892 MicroSet with Power Module offers you high-quality, low-profile, high-performance audio. Delivering clear-and-accurate sound in an inconspicuous package, the ultra-lightweight BP892 headset mic hooks securely behind either ear and can be worn for hours without fatigue. For maximum stability and comfort, the included AT8464 dual-ear microphone mount converts the MicroSet to a dual-ear-worn mic.
The Audio-Technica MicroSet microphone has a flat, extended frequency response and other outstanding performance specifications, resulting in extremely intelligible, natural audio for stage and television talent, lecturers, and houses of worship. Protected by a highly durable Parylene coating, this headworn mic is built to stand up to the rigors of day-to-day use.
The Audio-Technica headset mic comes in black.
Consumer Alert:Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.
- Handles high sound pressure levels with ease
- Extremely intelligible natural audio
- Inconspicuous, lightweight headset with capsule diameter of just 2.6mm is ideal for applications requiring minimum visibility
- Ergonomic under-ear design”flexible, lightweight contoured loop hooks behind the ear for an ultra-secure, comfortable fit with or without glasses
- Microphone comes equipped with AT8464 Dual-Ear Microphone Mount that converts single ear-worn MicroSet to a dual-ear-worn unit for maximum stability and comfort
- High-pass filter on power module provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
BP892 MicroSet Headworn Microphone with Power Module - Black Specifications:
- Element: Fixed-charge back plate, permanently polarized condenser
Polar pattern: Omnidirectional
Frequency response: 20-20,000Hz
Low frequency roll-off: 80Hz, 18dB/octave
Open circuit sensitivity: -49dB (3.5 mV) re 1V at 1 Pa
Impedance: 250 ohms
Maximum input sound level: 135dB SPL, 1kHz at 3% T.H.D.
Dynamic range (typical): 104dB, 1kHz at Max SPL
Signal-to-noise ratio: 63dB, 1kHz at 1 Pa
Phantom power requirements: 11-52V DC, 2 mA typical
Switch: Flat, roll-off
Microphone, boom & earpiece - 2.6g/0.09oz
Power module: 85g (3.0oz.)
Microphone: 8.1mm (0.32") long, 2.6mm (0.10") diameter
Boom: 98.4mm (3.87") long, 1.07mm (0.04") diameter
Power module: 97.6mm (3.84") long, 18.9mm (0.74") diameter
Output connector (power module): Integral 3-pin XLRM-type
Cable: 1.4m (55") long (permanently attached to microphone), 1.6mm (0.06") diameter, 2-conductor shielded cable with locking, 4-pin connector
Audio-Technica case style: M31
AT8539 power module;
AT8440 cable clip; two AT8157 windscreens; two AT8156 element covers; moisture guard; belt clip; carrying case