Applied Microphone Technology AMT Z1W Flute Microphone with Cable for AMT and Sennheiser Wireless Systems
Applied Microphone Technology
Wireless System Components
- Write a Review
- Seen a Lower Price? Click Here.
45 day price guarantee, 45 day return policy, 100% secure shopping
AMT sound quality for soloists or sections on Sennheiser systems.
Applied Microphone Technology's special version of the AMT Z1 flute microphone is designed to work with any Sennheiser transmitter/wireless system. The Z1W flute microphone comes wired directly with a 4-pin connector to connect directly to any Sennhieser wireless mic belt pack.
The AMT Z1 is a hardwired single microphone made for flute. The Z1W is the perfect choice from soft to louder playing applications. It can be used for featured soloist to miking a section of flutes. The AMT Z1 single microphone gets the most gain before feedback. The system comes with the microphone, special low-mass clamp, and preamp. The preamp uses the chip technology which contours the microphone for the most natural reproduction of sound possible.
Requires phantom power.
Consumer Alert:Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.
- AMT Z1W Microphone
- 4 pin connector for Sennheiser transmitters
- Soft carrying AMT pouch for microphone
Add the Z1W to the cart and capture every note with AMT sound quality.
AMT Z1W Flute Microphone with Cable for AMT and Sennheiser Wireless Systems Specifications:
- Element: Condenser
- Polar Pattern: Cardioid
- Frequency: 50Hz - 20kHz
- Sensitivity: -65dB+ 4dB
- Impedance: 150 Ohms
- Phantom Power: 12 to 52 vDC or 9 volt battery
- Max input SPL: 139 dB
- Dimension: 2" Flex Arm
- Cable: 10'
- Weight (Mic only): 22 grams