ADAM Audio A7 Powered Studio Monitor (Each)Product #482695 ADAM Audio 482695 YBDA Powered Monitors https://www.esnapw.com/rses/ESnapServlet?MerchantNumberSent=63655
- Write a Review
- Seen a Lower Price? Click Here.
45 day price guarantee, 45 day return policy, 100% secure shopping
ADAM's best-selling monitor puts their folded ribbon tweeter technology within the reach of project studios.
The A7, ADAM's best-selling and award-winning powered monitor, combines a high-frequency, transient-friendly A.R.T. ribbon tweeter with an innovative, state-of-the-art 6.5" woofer. The result in an extremely accurate monitor with all the clarity, detail and spectacular imaging traditionally associated with the ADAM name — but at a price that makes it accessible to nearly all home and project studios.
The A7 is powered by two 50W RMS amps (one per driver). The front panel sports both a power switch and volume control. The rear panel houses controls for tweeter level and two shelving filters for high and low frequencies. The unit also features both balanced (XLR) and unbalanced (RCA) input connectors, allowing it to be used in almost any audio application.
Accelerated Ribbon Technology
The A.R.T. (Accelerating Ribbon Technology) tweeters and midrange units take a completely new approach in kinematics to move air and improve the quality of music reproduction. Based on the original works of Dr. Oskar Heil, who invented his "Air Motion Transformer" back in 1972, new electroacoustic transducers have been developed that are based on improved layouts and new materials. The membrane consists of a lamella-like folded diaphragm whose single folds move according to the alternate current, thus squeezing air in and out. All other loudspeaker drive units, whether they are voice coil driven, electrostatics, piezos or magnetostatics, act like a piston, moving air in a 1:1 ratio. This is undesirable, as the specific weight of air is much lower than that of the driving mechanics. Speaking in terms of electrical engineering one could say there is a bad match between source and load. The A.R.T. principle achieves a 4:1 velocity transformation between driving diaphragm and driven air, i. e. the air moves in and out four times faster than the folds itself are moving. This superior "motor" is responsible for the enormous clarity and transient reproduction that is to be heard from the A.R.T. drive units.
A.R.T. tweeters are superior in musical clarity and transient reproduction. They have an above average efficiency of ~93 dB/W/m, a perfectly linear impedance of 3.2 ± 0.05 Ohms, an equally perfect phase response of ± 1° within the used bandwidth, a reasonable directivity characteristic and thermal power handling that exceeds that of 1" domes by a factor of 2 to 3. Summed up, here is a completely new transducer that has no weaknesses in terms of operation, compatibility, reliability or other electroacoustic specifications. Looking back into loudspeaker history you will not find anything comparable.
- 2-Way Active Bass Reflex Speaker
- Two 50W RMS amps (one per driver)
- Power switch and volume control
- Balanced (XLR) and unbalanced (RCA) input connectors
Satisfy your sweet spot with a ribbon tweeter A7.
A7 Powered Studio Monitor (Each) Specifications:
- Woofer: 165mm (6.5"), Rohacell / Carbonfibre sandwich
- A.R.T. tweeter: see A.R.T. Technology
- Freq.response (± 3 dB): 46Hz - 35 kHz
- Panel (rear-mounted): Input/HF gain, Hi/Lo EQ
- Power: 50W (sin), 80W (RMS)
- Inputs: balanced XLR + unbalanced RCA
- Dimensions: W x H x D: 180 x 330 x 280mm (7" x 13" x 11")
- Weight: 8.1kg (17.8 lb.)
- Warranty: 5 years