Open Box (Mint) Shure ULXS4 Standard Wireless Receiver
Wireless System Components
- Write a Review
- Seen a Lower Price? Click Here.
45 day price guarantee, 45 day return policy, 100% secure shopping
Shure quality at an affordable price.
The Shure ULXS4 standard wireless receiver offers an exceptional value in both performance and price, for both working musicians and sound installers. The feature set of the versatile ULXS4 receiver offers a direct path to full, clear audio signals, unencumbered and unattached.
Consumer Alert:Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.
- Automatic Frequency Selection with group scan function
- Over 1400 selectable frequencies
- 5-segment transmitted audio signal strength meter
- RF indicator
- 3-segment transmitter battery fuel gauge
- Advanced multi-function LCD displays group and channel
- Mic/Line switch
- Remotable 1/2-wave antenna
- XLR and 1/4-inch output
- Rugged plastic chassis
- 1/2 rack design
Order today and play fast and free!
ULXS4 Standard Wireless Receiver Specifications:
- RF Carrier Frequency Range
554.000 to 865.000 MHz (Available frequencies depend on the applicable regulations in the country where the system is
used). Refer to the frequency supplement supplied with the system.
100 m (300 ft.) under optimal conditions
NOTE: Actual working range depends on RF signal absorption, reflection, and interference
Audio Frequency Response
25 to 15,000 Hz, ±2 dB
NOTE: Overall system frequency response depends on the microphone element.
Connector: Antenna; Power Input
Connector Type: Antenna: BNC; Power Input IEC 320
Actual Impedance: Antenna: 50; Power Input: ””
Nominal Input Level: Antenna: ”95 to ”30 dBm; Power Input: 15 Vdc
Maximum Input Level: Antenna: +6 dBm (”20 dBm recommended); Power Input: 18 Vdc
Pin Assignments: Antenna: Shell = Ground Center = Signal; Power Input: IEC Standard
Voltage for Remote Power: Antenna: 12 Vdc, 150 mA maximum; Power Input: ””
Connector: Antenna: High Z Audio; Power Input: Low Z Audio*
Output Configuration: Antenna: Unbalanced (1/4 in.); Power Input: Balanced (XLR)
Actual Impedance: Antenna: 3 kohms; Power Input: 22 Ohms
Pin Assignments: Antenna: Tip = Hot Ring/ Sleeve = Gnd; Power Input: 1 = Ground 2 = Hot, 3 = Cold
Voltage/Current/Phantom Power Protection: Antenna: Yes; Power Input: Yes
*Output Level: Microphone Level = Line Level ” 20 dB