Shure PGXD14/PG30 Digital Wireless System with PG30 Headset Mic
Sku #H68498000000000- Sku
- H68498
- Write a Review
- Seen a Lower Price? Click Here.
45 day price guarantee, 45 day return policy, 100% secure shopping
An affordable digital wireless system with high-quality, hands-free performance.
The PGXD14/PG30 Digital Wireless System from Shure adds the clarity of 24-bit digital audio to the legacy of trusted Shure microphone options for wireless performance. This system includes the PG30 Headset Mic, PGXD1 bodypack transmitter, and a PGXD4 receiver.
The PC30 is an electret condenser microphone for headworn use with a wireless bodypack transmitter. It has a comfortable wireframe for secure fit and has a smooth, natural frequency response comparable to handheld microphones to give you excellent sound in a convenient, hands-free solution.
The rugged PGXD1 bodypack transmitter easily clips onto a belt or guitar strap, and provides you with a 20Hz - 20kHz frequency range, up to 10 hours of continuous use on 2 standard AA batteries (not included), and 200' of wireless freedom.
The PGXD4 receiver offers 24-bit/48kHz technology for incredibly accurate sound, auto frequency selection, and greater reliability thanks to its true digital diversity.
Consumer Alert:
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.Features
PGXD1 transmitter with WA302 Instrument Cable
- Rugged, compact bodypack with belt clip and instrument cable
- 20Hz – 20kHz frequency range captures every nuance of your tone
- Power, mute, and battery status LED
- Up to 10 hours of continuous use from 2 AA batteries
- 200' (60m) operating range
- 26dB of continuously adjustable gain to match variable input levels
PGXD4 Wireless Receiver
- 24-bit / 48kHz digital technology for incredibly accurate sound
- Automatic frequency selection locates a clear channel instantly
- One-touch sync automatically syncs the transmitter and receiver
- True digital diversity delivers rock-solid wireless signal reliability
- Up to 5 systems can be used at once
- 1⁄4" and XLR audio outputs
- Included padded carrying case for portability and protection
PG30
- Comfortable wireframe for secure fit
- Smooth, natural frequency response comparable to quality handheld microphones
Order this wireless headset mic system today and free up your hands today.
PGXD14/PG30 Digital Wireless System with PG30 Headset Mic Specifications:
- PGXD1 transmitter/strong>
- Audio input level: +10 dBV maximum, at minimum gain setting -16 dBV maximum, at maximum gain
- Gain adjustment range: 26dB
- Input impedance: 1MΩ
- RF Output Level: 10 mW maximum (dependent on applicable country regulations)
- Dimensions (HxWxD): 108mm x 64mm x 19mm (4.25" x 2.50" x 0.75")
- Weight: 128g (4.5oz.) without batteries
- Housing: Molded polycarbonate case
- Power requirements:
- Battery Life: Up to 10 hours
- PGXD4 receiver
- Dimensions (HxWxD): 40mm x 181mm x 104mm (1.6" x 7.125" x 4.1")
- Weight: 289g (10.2oz.)
- Housing: ABS
- Audio Output Level (ref. ±38kHz deviation, 1kHz tone): XLR connector (into 3000Ω load): -2.5dBV 1/4" connector (into 10000Ω load): +10 dBV
- Impedance:
- XLR: 50Ω
- 1/4": 50Ω
- Sensitivity: -102 dBm @ 10-5 BER
- Image rejection: > 70dB, typical
- XLR output:
- Impedance balanced Pin 1: Ground (cable shield)
- Pin 2: Audio
- Pin 3: No Audio
- Audio LED:
- Red: 2dB below clip
- Amber: 12dB below clip
- Green: 50dB below clip
- Power Requirements: 12-18 Vdc at 150 mA, supplied by external power supply
- Pin Assignments: XLR: 1 = ground, 2 = hot, 3 = cold 6.35mm (1/4") TRS: Tip = audio, Ring = no audio, Sleeve = ground
- PG30
- Polar pattern: Cardioid (unidirectional)
- Output impedance: 1200Ω @1kHz
- Output level: -52dBV/Pa(2.5mV)
- Signal-to-noise ratio: 61dB, 1kHzat1Pa
- Maximum SPL: 125dB
- Dynamic range (max.SPLtoA-weightednoiselevel): 92dB
- Output Noise: 33dB (typical, A-Weighted)
- Recommended Operating Voltage: +5VDC, 10V max (pin 2 to pin 1)
- Polarity: Positive sound pressure on diaphragm produces positive voltage on pins 3 and 4relative to pin 1 (ground) on the mini TA4F connector
- Cable: 1.27m (50") two-conductor shielded
- Connector: Mini TA4F
- Net Weight: 51.6g (1.82oz)
