Shure 515BSLX Handheld Locking On/Off MicSku #270933000000000 Shure 270933 YEC Specialty Microphones https://www.esnapw.com/rses/ESnapServlet?MerchantNumberSent=63655
- Write a Review
- Seen a Lower Price? Click Here.
45 day price guarantee, 45 day return policy, 100% secure shopping
Perfect for podium or studio talk-back.
The Shure 515BSLX is a dynamic (moving coil), low-impedance, cardioid (unidirectional) microphone designed for mounting on a gooseneck or fixed stand with a 5/8 in.-27 thread. The cardioid pickup pattern provides excellent voice reproduction with effective rejection of feedback and background noise. The 515BSLX microphone is especially suitable for use in communications, paging, and talkback systems. The 515BSLX is supplied with a slide switch controlling the microphone audio and a relay circuit, permitting hands-free operation. It comes with a 6 ft (1.8 m) four-conductor, 2-conductors shielded, cable, and is wired with the microphone circuit normally open for use in parallel-wired microphone installations.
- Rolled-off low-frequency response combined with a smooth high-frequency rise for clear and intelligible voice pickup
- Symmetrical cardioid pickup pattern minimizes feedback
- Shock-mounted cartridge for quiet operation and low stand/handling noise
- Neodymium magnet for high signal-to-noise ratio
- Heavy-duty zinc, die-cast, locking, metal grille protects cartridge and resists wear
- Built-in slide switch controls both microphone circuit and relay or control circuit
- Backed by the Shure 2-years warranty
Order today and be Shure equipped.
515BSLX Handheld Locking On/Off Mic Specifications:
- Type: Dynamic (moving coil)
- Frequency Response: 80 to 15,000 Hz
- Polar Pattern: Cardioid (unidirectional). Effective rejection of sound
- at rear of microphone is uniform at all frequencies, while front pickup characteristics are uniform about axis
- Impedance: 150 Ohms rated (180 Ohms actual)
- Output Level (at 1,000 Hz): Open Circuit Voltage*: —57.0 dBV/Pa* (0.14 mV)
- (*1 Pa=94 dB SPL)
- Switch: Built-in, double-pole double-throw slide switch. Lockplate to lock
- switch ON
- Shock Mount: Internal rubber vibration isolator
- Cable: Highly durable, retractable cable with effective hum shielding, four conductors (two shielded), neoprene jacketed with 5-pin connector
- Cable Length: 13 in. (330 mm) retracted; 6 ft (1.83 m) extended
- Case: Silver finish die casting with black enamel diecast grille
- and stainless steel screen
- Dimensions (Length x diameter): 6.5" x 1.5" (16.5 x 3.75 cm)
- Net weight: 13.5 oz. (380 g)