QSC KW122 Active Loudspeaker 1000 Watt 12 Inch 2 Way
Powered PA Speakers
- Write a Review
- Seen a Lower Price? Click Here.
45 day price guarantee, 45 day return policy, 100% secure shopping
Building on the success of the K Series, the KW-122 and the entire KW Series by QSC represents the next evolutionary step in wood enclosure loudspeakers. QSC's system engineers have created the KW Series to feature all the groundbreaking electronic attributes of the popular K Series, while at the same time designing a product that is both smaller and lighter than previous wood enclosure models.
High Output: The KW-122 features a QSC designed, 1000 watt (2 x 500 W continuous) Class D power module. And continuing in the K Series tradition, it is fitted with the identical high-output 1.75" HF device (full-range models) and woofers of the same high quality design.
Defined Coverage Area: Directivity Matched Transition (DMT) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
DSP: Extensive signal processing is employed throughout, providing levels of sonic clarity and total output that defy all expectations for a product in this category:
Intrinsic Correction, first featured in our high-end line array products maps 65-75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat bandpass target. The result is a speaker that behaves equally well across the entire sound field.
DEEP and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
GuardRail protection, first introduced on QSC's GX Series amplifiers protects both the amplifier module and your performance from unnatural and destructive clipping.
Connectivity: KW Series features a four-position mic / line gain switch that allows for connection of a wide variety of devices. Combo XLR and 1/4" TRS inputs accept both mic and line level input while a set of RCA phono inputs (except KW181) allow additional connectivity to portable MP3 players, CD players and line-level mixers. Up to three audio sources can be mixed internally and summed to a balanced output for "daisy-chaining" of multiple units. Separate direct outputs are also provided on each channel for additional output flexibility. Control: On-board switches provide preset EQ settings. The HF setting (full-range models) can be set to VOCAL BOOST for additional presence in the critical mid-frequency area or FLAT for accurate reproduction of the incoming signal. The LF switch can be set to NORM, DEEP for additional bass extension, or EXT SUB (full-range models) for use with an external subwoofer. The rear panel LED switch can be set to POWER, illuminating the front-mounted LED when the unit is powered on, OFF for applications where it is not desirable to illuminate the front LED, or LIMIT which indicates to the system operator that the clip limiter circuit has been engaged during operation.
Tilt-Direct: The KW122 features a unique Tilt-Direct pole cup mounting system. A simple turn of the dial engages a 7.5 degree downward tilt of the speaker allowing acoustic energy to be kept on the audience and off reflective surfaces for applications where maximum coverage from a high-positioned speaker is desired.
Remote Gain: Remote gain control capability is offered via a potentiometer (not included) connected to the on-board Phoenix-Style connector. In an installed application, multiple KW Series speakers can be "daisy-chained" for total gain control from a single remote pot. Auto-standby mode is engaged after 5 minutes of inactivity.
Premium-grade materials: KW Series is designed to withstand the rigors of professional use. Advanced construction processes, premium-grade Baltic birch cabinetry, ergonomic, cast aluminum handles, low-noise casters (KW181) and a highly protective steel grille provide for ease of transport and long term durability. Integrated M10 suspension points allow for flown applications with a KW M10 KIT (sold separately).
- Active/passive: Active
- Type: Two-way full range
- LF driver: 12"
- MF driver: N/A
- HF driver: 1.75" compression driver
- Amplifier class: D
- Wattage: 1000W continuous
- Mixer/preamp: Yes
- Frequency response: 50Hz - 20 kHz
- Coverage pattern: 75° assymetric
- Max SPL: 131 dB
- XLR: 2 XLR/TRS
- RCA: Stereo pair
- XLR: 3
- Cabinet material: 15 mm painted birch ply
- Width: 15"
- Height: 26"
- Depth: 15.4"
KW122 Active Loudspeaker 1000 Watt 12 Inch 2 Way Specifications:
Configuration 12" 2-way multipurpose
Low-frequency: 12" cone transducer
High-frequency: 1.75" diaphragm compression driver
Frequency Response (-6 dB) 53 Hz - 18 kHz
Frequency Range (-10 dB) 50 Hz - 20 kHz
Nominal Coverage (-6 dB) 75 axisymmetric
Maximum SPL1 131 dB peak
Power Output2 1000 W Class D (500 W LF, 500 W HF) continuous
2000 W peak
Input Impedance (ohms) Channel A XLR / ¼":
Mic gain setting : Balanced: Unbalanced
0 dB : 38k : 19k
+12 dB : 10k : 5k
+24 dB : 2.66k : 1.33k
+36 dB : 660 ohms : 330 ohms
Channel B XLR / ¼": 38k balanced / 19k unbalanced
Channel B RCA: 10k
Power, Gain A, Gain B, Channel A Input Gain (0 dB / 12 dB / 24 dB / 36 dB), LF Mode (Ext Sub/Norm/DEEP), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
Indicators Power, Signal A, Signal B, Standby, Limit, Mic (24 dB and 36 dB settings)
Connectors: Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
Cooling: On demand, 50 mm variable speed fan
Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail
Transducer Protection: Thermal limiting, excursion limiting
AC Power Input: Universal power supply 100-240 VAC, 50 - 60 Hz
AC Power Consumption (1/8 Power)
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Material: 15 mm painted birch plywood
Finish: Black textured paint
Grille : Black powder coated 16 gauge steel
Dimensions (HWD): 26" x 15" x 15.4"
Weight (Net): 49lb