Open Box (Blemished) Peavey PVi 8500 8-Channel 400W Powered PA Head with Bluetooth and FX
- Write a Review
- Seen a Lower Price? Click Here.
45 day price guarantee, 45 day return policy, 100% secure shopping
Eight channels, 200 watts.
The Peavey PVi 8500 is a revolutionary all-in-one powered mixer with everything a musician needs: eight combination XLR and 1/4" inputs using Peavey's award-winning mic preamps, and 400 watts of peak power for crystal-clear audio reproduction. The Peavey PVi 8500 uses exclusive and patented features like Mid Morph to accurately help improve tone and clarity of vocals. Feedback is quickly and easily identified and removed with Peavey's nine-band graphic EQ combined with our patented and revolutionary FLS Feedback Locating System. The PVi 8500 / PV8500 is equipped with Peavey's exclusive Kosmos-C technology, which drastically enhances both the low and high end of the audio spectrum. Footswitchable, built-in 24-bit digital effects complements the already feature-packed unit. Connect virtually any music device to this versatile mixer via the onboard 1/4", RCA and 1/8" mini jacks.
- FLS Feedback Locating System
- Footswitchable effects defeat
- Combination XLR and 1/4" input jacks
- RCA, 1/8" Media input
- Selectable 9-Band Graphic EQ with FLS
- Selectable Main or Monitor dual power section
- RCA Record outputs
- On-board 24- bit digital effects with mute button
- Clip light and signal present indicator
- Main line level 1/4" output
- Speaker protection circuit
- 48 Volt Phantom Power
Order today and handle most gigs and rehearsals with a lightweight, great-sounding powered mixer.
PVi 8500 8-Channel 400W Powered PA Head with Bluetooth and FX Specifications:
- INPUT SENSITIVITY:
Mic In to full power at the power amp. Master Volume Nom.
Full: -40 dBu
Nominal: -22 dBu
Line In to full power at the power amp. Master Volume Nom.
Full: -10 dBu
Nominal: +8 dBu
Low EQ 80 Hz ±15 dB
Low 250 Hz ±15 dB
High 4 kHz ±15 dB
High EQ 12 kHz ±15 dB
Clip LEDs come on 3 dB before clipping.
All controls nominal (detent)
Mic to Main 20 Hz - 20 kHz +0, -1 dB
Line to Main 20 Hz - 30 kHz +0, -1 dB
Mic to Amp 50 Hz - 20 kHz +0, -3 dB
Line to Amp 40 Hz - 20 kHz +0, -3 dB
Main = Main line output, 22 - 22 kHz filter
Amp 1 = Amplifier output, loaded at 4 Ohms, through AP
AUX-0025 switching amplifier filter
All controls full down.
Main <-95 dBu
Amp 1 <-70 dBu
Master Volume nominal
Main <-88 dBu
Amp 1 <-67 dBu
All controls nominal
<0.01% @ main line output, -30 dBu in mic input Channel 1
<0.5% @ amp 1 @ 100 Watts into 4 Ohms
All controls nominal
<0.005% @ main line output, +4 dBu in line input Channel 1
63Hz ±12 dB
125Hz ±12 dB
250Hz ±12 dB
500Hz ±12 dB
1kHz ±12 dB
2kHz ±12 dB
4kHz ±12 dB
8kHz ±12 dB
12kHz ±12 dB
Limits amplifier power just before clipping. The limiter holds the amp power
without clipping and can be driven up to 18 dB past maximum output.
AMPLIFIER OUTPUT POWER:
Both channels loaded at 8 ohms: 60 Watts RMS per ch
120 Watts Peak per ch
Both channels loaded at 4 ohms: 100 Watts RMS per ch
200 Watts Peak per ch
Domestic: 120VAC 50/60Hz 74 Watts Nominal
Export: 230VAC 50/60Hz 74 Watts Nominal
Dimensions: H x W x D
11.25" x 19.375" x 10.75"
Weigh t: 22.2 lbs.