Mackie HR824mk2 Studio Monitor (2010)  

Product #485388

45 day price guarantee, 45 day return policy, 100% secure shopping

$699.99 Finance Now!

1 Restock From $599.99
Select a Style to Continue
Platinum Coverage: (What’s This?) most popular
Add to list
See All Mackie Powered Studio Monitors

Turn your studio's sweet spot into a full-on sweet zone.

The high-resolution Mackie HR824mk2 Active Studio Reference Monitor sounds as smooth as it looks. The rounded contours of the HR824mk2 monitor's Zero Edge Baffle minimize diffraction to give you a crystal clear audio image of your mix. The Mackie Optimized Waveguide delivers full, articulate mids, while the rear-firing, mass-loaded passive radiator ensures tight bass extension to 37Hz. Acoustic Space, low-frequency (LF) roll-off and high-frequency (HF) controls let you easily tailor the sound to suit your space and taste. And thanks to remarkably linear frequency response, Mackie HR824mk2 audio monitors ensure accurate mix translation. Combine all this with wide, even dispersion, and Mackie HR824mk2 monitors turn your studio's sweet spot into a full-on sweet zone.

  • High-resolution Active studio reference monitor
  • Ultra-linear frequency response for accurate mix translation
  • 8.75" high-precision, low-distortion LF transducer
  • 1" titanium dome, ferrofluid cooled tweeter
  • Optimized Waveguide for wide, even sweet zone
  • Twin FR Series amps - 150W for LF / 100W for HF
  • Cast aluminum Zero Edge Baffle minimizes diffraction
  • Full internal damping eliminates midrange artifacts
  • Passive radiator provides tight, articulate bass extension down to 35Hz
  • Acoustic Space, LF roll-off, and HF controls
  • Balanced XLR, TRS, and unbalanced RCA inputs
  • OmniMount ready for easy wall/ceiling placement
  • THX pm3 certified for surround sound applications

Order today and hear your mixes with a new level of accuracy.


HR824mk2 Studio Monitor (2010) Specifications:

  • Acoustic Section
    Free-field Frequency Response: &plsumn;1.5dB, 37Hz to 20kHz
    Lower cutoff frequency: -3dB @ 35Hz
    Upper cutoff frequency: -3dB @ 22kHz
    Sound Pressure Level at 1 meter, -7.5dBu into balanced input: 100dB SPL @ 1m
    Maximum peak SPL per pair: 120dB SPL @ 1m
    Maximum short term SPL on axis, half space 80Hz to 2.5kHz: 111dB SPL @ 1m
    Residual noise (maximum gain, 600? source, 20Hz-20kHz bandwidth): < 8dB SPL @ 1m

    Rated Line Input Voltage and Power:
    (Power consumption):
    Standby mode: 8 watts
    Quiescent (idle): 18 watts
    Musical Program, Loud mix: 135 watts

    US: 120 VAC, 60Hz
    Rated Power (For UL-6500, CSA-E65-94, EN-60065): 150 watts

    Amplifier Section
    (Low-frequency power amplifier)
    Rated Power (at 1kHz with 1% THD): 150W
    Rated Load Impedance: 4 ohms
    Burst Power Output: 350W
    Rated THD (1W to -1dB of rated power): 0.1 %
    Slew Rate: 35V/S
    Distortion (THD, SMPTE IMD, DIM 100): <0.035%

    (20Hz-20kHz, unweighted, referenced to 150W into 4?): > 102dB
    Cooling: Convection
    Design: Class AB, Parametric Servo Feedback

    (High-frequency power amplifier)
    Rated Power(at 1kHz with 1% THD): 100W
    Rated Load Impedance: 6 ohms
    Rated THD (1W to -1dB of rated power): 0.1 %
    Burst Power Output: 210W
    Slew Rate: 35V/S
    Distortion (THD, SMPTE IMD, DIM 100): < 0.035%
    Signal-to-Noise (20Hz-20kHz, unweighted, referenced to 40W into 8?): > 102dB
    Cooling: Convection
    Design: Monolithic IC, Conventional Class AB

    System Specifications
    Input Type: Balanced Differential (XLR and 1/4" TRS), Unbalanced (RCA)
    Input Impedance: 20k? Balanced, 10k? Unbalanced
    Input Protection: Rfi and Level Protected
    Maximum Input Level: +20dBu
    Low Frequency filter: -3dB @ 37Hz, 2nd-order transitional high-pass filter, -3dB @ 47Hz, 4th-order Chebyshev high-pass filter, -3dB @ 80Hz, 4th-order Butterworth high-pass filter
    HF Equalization: ±2dB @ 10kHz, shelving
    Acoustic Space: (A position) -4dB @ 50Hz, shelving, (B position) -2dB @ 50Hz, shelving, (C position) flat

    Independent high and low-frequency overload detection
    Enclosure Alignment: 6th Order
    Over Excursion Prevention: 2nd Order High-Pass filter
    Low Line Voltage Shut Down: 60% of Nominal Line
    Thermal Protection: Amplifier Shut-Down, Auto Reset
    Muting: 5 seconds at turn-on
    Driver Protection: Independent LF and HF Detection, Overall Compression

    Low-frequency driver:
    Diameter: 8.75 inches (170mm)
    Sensitivity (2.83V, 1m): 91dB SPL
    Nominal Impedance: 4?
    Voice Coil Diameter: 1.6" (40mm)
    Frame: Die-cast magnesium
    Magnet: Ferrite
    Fully shielded: Ferrite opposing magnet
    High-frequency driver: Sensitivity (2.83V, 1m): 91dB SPL
    Nominal Impedance: 6?
    Power Handling (Long Term/Program): 20/50 watts
    Frequency Range: 1.6kHz to 22kHz
    Diaphragm/Suspension: Titanium with polymer suspension
    Voice Coil Diameter: 1.0" (25.4mm)
    Magnet: Neodymium
    Bucking Magnet: Ferrite opposing magnet

    Passive Radiator: 6" x 9" (152mm x 228mm) mass-loaded elliptical flat
    piston with variable thickness filleted-edge rubber surround
    Crossover Type: Modified Linkwitz-Riley, 24dB/octave @ 1900Hz

    Materials and Construction:
    3?4" (19mm) thick MDF cabinet construction with internal bracing to add to cabinet stiffness
    Piano-black gloss finish
    Die-cast aluminum exponential wave guide for controlled, wide dispersion from high-frequency driver and Zero Edge Baffle to minimize diffraction around the cabinet edges
    Open cell adiabatic "foam fill" acoustical damping material absorbs internal reflections, preventing delayed sound coloration
    Flush-mount connector system allows monitor to be placed against a wall without need for connector clearance

    Physical Properties
    Height: 16.8"/42.5cm
    Width: 10.8"/27.3cm
    Depth Enclosure: 11.4"/29.0cm
    Depth Overall: 13.8"/35.1cm
    Weight: 34.6lb./15.7kg
review resources
write a review