Mackie HR624mk2 Studio Monitor 2010

Sku #485387000000000

45 day price guarantee, 45 day return policy, 100% secure shopping

$499.99 Finance Now!

Order Now! Expected to ship 12/14/15

Platinum Coverage: (What’s This?) most popular
Add to list
See All Mackie Powered Studio Monitors

A THX-approved, 6" high-resolution active studio monitor that offers powerful, accurate mix guidance.

With the same design as the HR824mk2 in a more comact package, the Mackie HR624mk2 high-resolution Active Studio Reference Monitor is the perfect alternative when space is limited. The new Zero Edge Baffle minimizes diffraction for a crystal clear image of your mix, and controls sound waves for wide, even dispersion. Acoustic Space, LF roll-off and HF controls let you easily tailor the sound to suit your space and your taste. Thanks to remarkably linear frequency response, you always get accurate mix translation. Combine all this with superior bass extension, and the Mackie HR624mk2 monitor makes your studio's sweet spot a full-on sweet zone.

  • High-resolution Active studio reference monitor
  • Ultra-linear frequency response for accurate mix translation
  • 6.7" high-precision, low-distortion LF transducer
  • 1" titanium dome, ferrofluid cooled tweeter
  • Optimized Waveguide for wide, even sweet zone
  • Twin FR Series amps - 100W for LF / 40W for HF
  • Cast aluminum Zero Edge Baffle minimizes diffraction
  • Full internal damping eliminates midrange artifacts
  • Passive radiator provides tight, articulate bass extension down to 45Hz
  • Acoustic Space, LF roll-off, and HF controls
  • Balanced XLR, TRS, and unbalanced RCA inputs
  • OmniMount ready for easy wall/ceiling placement
  • THX pm3 certified for surround sound applications

Add monitors with flat frequency response and non-fatiguing crisp yet smooth highs to your studio. Order today!


HR624mk2 Studio Monitor 2010 Specifications:

  • Acoustic Section
    Free-Field Frequency Response: &plsumn;1.5dB, 49Hz to 20kHz
    Lower cutoff frequency: -3dB @ 45Hz
    Upper cutoff frequency: -3dB @ 22kHz
    Sound Pressure Level at 1 meter, -7.5dBu into balanced input: 100dB SPL @ 1m
    Maximum peak SPL per pair: 115dB SPL @ 1m
    Maximum short term SPL on axis, half space 80Hz to 2.5kHz: 106dB SPL @ 1m
    Residual noise (maximum gain, 600Î source, 20Hz-20kHz bandwidth): < 8dB SPL @ 1m

    Rated Line Input Voltage and Power:
    (Power consumption):
    Standby mode: 12 watts
    Quiescent (idle): 20 watts
    Musical Program, Loud mix: 105 watts
    Both channels driven into resistive loading to 1% clipping
    (LF 86W/4Î, HF 38W/8Î): 255 watts

    US: 120 VAC, 60Hz
    Rated Power (For UL-6500, CSA-E65-94, EN-60065): 130 watts

    Amplifier Section
    (Low-frequency power amplifier)
    Rated Power (at 1kHz with 1% THD): 100 watts
    Rated Load Impedance: 4 ohms
    Rated THD (1W to -1dB of rated power): 0.1 %
    Slew Rate: 15V/S
    Distortion (THD, SMPTE IMD, DIM 100): < 0.035%

    (20Hz-20kHz, unweighted, referenced to 100W into 4Î): > 101dB
    Cooling: Convection
    Design: Monolithic IC, Class AB, Parametric Servo Feedback

    (High-frequency power amplifler)
    Rated Power(at 1kHz with 1% THD): 40 watts
    Rated Load Impedance: 6 ohms
    Rated THD (1W to -1dB of rated power): 0.1 %
    Slew Rate: 15V/S
    Distortion (THD, SMPTE IMD, DIM 100): < 0.035%
    Signal-to-Noise (20Hz-20kHz, unweighted, referenced to 40W into 8Î): > 93dB
    Cooling: Convection
    Design: Monolithic IC, Conventional Class AB

    System Specifications
    Input Type: Balanced Differential (XLR and 1/4" TRS), Unbalanced (RCA)
    Input Impedance: 20 kÎ Balanced, 10 kÎ Unbalanced
    Input Protection: RFI and Level Protected
    Maximum Input Level: +20dBu
    Low Frequency Filter: 80Hz, 2nd Order, Butterworth
    HF Equalization: Shelving ±2dB @ 10kHz
    Acoustic Space: (A position) -4dB @ 50Hz, shelving, (B position) -2dB @ 50Hz, shelving, (C position) Flat

    Independent high and low-frequency overload detection
    Enclosure Alignment: 6th Order
    Over Excursion Prevention: 2nd Order High-Pass Filter
    Low Line Voltage Shut Down: 60% of Nominal Line
    Thermal Protection: Amplifier Shut-Down, Auto Reset
    Muting: 5 seconds at turn-on
    Signal Sense Threshold: -74dBu (0.155 mV)
    Driver Protection: Independent LF and HF Detection, Overall Compression

    Low-frequency driver:
    Diameter: 6.7 inches (170mm)
    Sensitivity (2.83V, 1m): 89dB SPL
    Nominal Impedance: 4 Î
    Voice Coil Diameter: 1.25" (32mm)
    Power Handling (Long Term/Program): 50/150 watts
    Frequency Range: 45Hz to 6kHz
    Frame: Die-cast magnesium
    Magnet: Ferrite
    Fully shielded: Ferrite opposing magnet
    High-frequency driver: Sensitivity (2.83V, 1m): 91dB SPL
    Nominal Impedance: 6Î
    Power Handling (Long Term/Program): 20/50 watts
    Frequency Range: 1.6kHz to 22kHz
    Diaphragm/Suspension: Titanium with polymer suspension
    Voice Coil Diameter: 1.0" (25.4mm)
    Magnet: Neodymium
    Bucking Magnet: Ferrite opposing magnet

    Passive Radiator: 6" x 9" (152mm x 228mm) mass-loaded elliptical flat piston with variable thickness filleted-edge rubber surround
    Crossover Type: Modified Linkwitz-Riley, 24dB/octave @ 3kHz

    Materials and Construction:
    3/4" (19mm) thick MDF cabinet construction with internal bracing to add to cabinet stiffness
    Piano-black gloss finish
    Die-cast aluminum exponential wave guide for controlled, wide dispersion from high-frequency driver and Zero Edge Baffle to minimize diffraction around the cabinet edges
    Open cell adiabatic "foam fill" acoustical damping material absorbs internal reflections, preventing delayed sound coloration
    Flush-mount connector system allows monitor to be placed against a wall without need for connector clearance

    Physical Properties
    Height: 13.1"/33.3cm
    Width: 8.6"/21.9cm
    Depth Enclosure: 10.3"/26.2cm
    Depth Overall: 12.6"/31.9 cm
    Internal Volume: 0.29 cubic feet (8.2 liters)
    Weight: 23.4lb./10.6kg
review resources
write a review