JBL JRX112Mi 12" Two-Way Loudspeaker System
Unpowered Stage Monitors
- Write a Review
- Seen a Lower Price? Click Here.
45 day price guarantee, 45 day return policy, 100% secure shopping
Powered speaker for flying.
The JRX112Mi is an economical, suspendable, twelve-inch, two-way speaker system designed for installation where ground stacking or pole mounting is impractical or undesirable. If your speaker needs to fly, this is the one.
- JBL 12 in low frequency driver with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more cross- sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.
- Ferro-fluid cooled compression driver with titanium diaphragm improves high frequency performance as well as system reliability.
- The advanced network topology crossover design shapes frequency response and delivers coherent summation in the crossover region.
- High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
- Progressive Transition highfrequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
- The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
- SonicGuard protects the highfrequency driver from excess power without interrupting the performance.
- Attractive 18-gauge perforated, steel grille protects components from damage.
- Cabinet is fitted with three M10 threaded suspension points.
Order today and complete the power and speakers part of your installation.
JRX112Mi 12" Two-Way Loudspeaker System Specifications:
- Power Rating: 250 W / 1000 W
Frequency Range: 60 Hz - 16 kHz (-10 dB)
Dimensions (H x W x D): 22.7" x 15.7" x 12.8"
Frequency Response: 70 Hz - 12 kHz (±3 dB)
Nominal Impedance: 8 ohms
Sensitivity: 99 dB SPL (1w/1m)
Recommended Amplifier Power: 250 W to 500 W into 8 ohms
Maximum SPL: 129 dB
Nominal Dispersion: 90º x 50º
Crossover Frequency: 1.8 kHz
Weight: 19.5 kg (43 lb)
High Frequency Driver: JBL 2412 1 in exit compression driver mounted on Progressive
Low Frequency Driver: JBL M112-8
Input Connectors: Neutrik Speakon NL-4 (x1); .25 in