Focusrite Clarett 8PreX Thunderbolt Audio Interface
- Write a Review
- Seen a Lower Price? Click Here.
FREE SHIPPING on Almost Everything
Focusrite's lightning-quick Thunderbolt interface.
Are you up to Thunderbolt speed? The Focusrite Clarett Series audio interfaces can deliver. Designed for more permanent installations, the Clarett 8 Pre X combines eight newly designed Clarett mic preamps, with class-leading digital conversion and extraordinarily low round-trip latency “ so low that you can use DAW plugins while monitoring your recordings. It offers superbly low noise and distortion, plus the œAir effect that models the sound of Focusrites renowned ISA transformer-based preamps. It also features gain controls with a special law that makes changes smoother and more natural. Complete with Focusrites acclaimed precision conversion offering up to 119dB real-world dynamic range, theres no better “ or faster “ way of getting audio into or out of your DAW at the highest possible quality.
Remote control from iPhone or iPad
Download the free Focusrite iOS Control app and adjust cue mixes created with the Focusrite Control desktop app remotely from an iPad, iPhone or iPod touch.
All The Channels Your Studio Needs
26 inputs and 28 outputs within a 2U rack space, including eight analogue inputs, 10 analogue outputs, stereo S/PDIF I/O and 16 channels of ADAT I/O. Connect up to 16 more mic preamps over ADAT for a 24 channel microphone setup.
The Heart of Your Studio
Specially designed for studio installation, Clarett 8 PreX includes separate rear panel inputs for mic, line and instrument, as well as ADAT I/O to add 16 more channels, dedicated phantom power, phase reverse and high pass filters on every channel.
Powerful Metering and Monitoring
Central panel helps you keep an eye “ and an ear “on analog and digital input levels, and your main monitor outputs, via a 6-segment, multichannel hardware meter. Accessible monitor features include a large-diameter level control, plus dim and mute buttons.
Dual High-power Headphone Outputs
The two wide dynamic range headphone outputs are powerful enough to deliver plenty of level, even on high impedance headphones “ perfect for both tracking and mixing.
Classic Processor Plug-ins Included
Every Clarett includes the Red 2 & Red 3 Plug-in Suite, which accurately models Focusrites classic Red range equalizer and compressor hardware “ letting you exploit the originals famous sound, conveniently from within your audio software.
Digital Sync On-board
Clarett 8 Pre X features Word Clock I/O, enabling it to act as master for clocking multiple digital devices, or sync to word clock from an external digital device.
Now with Free Softube Plug-ins
Focusrite Scarlett, Saffire, and Clarett audio interfaces now include three Softube plug-ins* for free. Purchase a
Focusrite Scarlett, Saffire, and Clarett on or after September 1st, 2015 and you'll receive a free download copy of TSAR-1R Reverb, Tube Delay and Saturation Knob.
TSAR-1R: Add space, depth and width to your sound—TSAR-1R is a reverb plug-in with world class sound
and extreme ease of use. With a single slider, you can take TSAR-1R from realistic and three-dimensional
rooms to dramatic and dreamlike halls.
Tube Delay: A tasty echo effect that can go from clean to rude by overdriving its three modeled tube stages.
Create anything from realistic room echoes to rockabilly style slapbacks—or take it all the way into dub
reggae echo madness.
Saturation Knob: Add grit and warmth to any sound source with this modeled output distortion unit. Use
it to fatten up bass lines, add some harmonics and shimmer to vocals, or simply destroy your drum loop.
Simply turn up the knob to add saturation, and use the three-position switch to alter the distortion character.
- Max bit depth: 24-bit
- Max sampling rate: 192kHz
- Total inputs: 26
- Mic preamps: 8
- XLR/TRS combo jacks: 0
- XLR only jacks: 8
- 1/4 only jacks: 2 (TS unbalanced)
- S/PDIF in: 2
- ADAT/optical in: 16
- RCA in: No
- AES/EBU: No
- MADI: No
- Total outputs: 28
- XLR out: 0
- 1/4 out: 10 (TRS balanced)
- S/PDIF out: 2
- ADAT/optical out: 16
- RCA out: No
- AES / EBU: No
- MADI: No
- Other Connectivity
- Computer connection: Thunderbolt
- MIDI I/O: 5-pin In/Out
- Headphone output(s): 2
- Word-clock I/O: Yes
- Onboard Features
- Platform compatibility: Mac
- Phantom power: Yes
- Direct monitoring: Yes
- Onboard DSP: No
- Metering: LED meters
- Display: No
- Latency control: Yes
- Monitor control: Yes
- Headphone control: Yes
- Width: Info not available
- Height: Info not available
- Depth: Info not available
- Weight: Info not available
- Rack-mountable: Yes
- Included software: Yes
Color some red in your rack today!
REVIEW SNAPSHOT®by PowerReviews
Reviewed by 1 customer
Displaying review 1
- Clear Sound
- Easy To Use
- Amateur Recording
- Home Studio
- Professional Recording
Comments about Focusrite Clarett 8PreX Thunderbolt Audio Interface:
I purchased the Clarett as a replacement for my trusty old Mackie Onyx Firewire.
First: As the literature says, the Thunderbolt connectivity produces virtually no latency. No more turning off plug-ins while tracking to spare your CPU.
Second: Speed means nothing if the quality of the sound is compromised, While completing a project started on the Mackie Onyx, I noticed immediately that the new tracks created thru the Focusrite have more transparency and less noise. The "AIR" option adds another dimension that, while not universally useful, sounds really great on drum overheads, acoustic guitar, and some vocals.
Third: The Red Plug-In Suite that's included features a really nice compressor and EQ, both of which are always appreciated. The Focusrite Control software allows you to reconfigure the interface almost instantly and really expands the unit's flexibility.