Audix F6 Kick Drum & Bass Frequencies MicrophoneSku #584190000000000 Audix 584190 YEB Live Microphones https://www.esnapw.com/rses/ESnapServlet?MerchantNumberSent=63655
- Write a Review
- Seen a Lower Price? Click Here.
45 day price guarantee, 45 day return policy, 100% secure shopping
A purpose-built kick drum mic with more midrange punch.
The Audix f6 Fusion Series bass frequency microphone is purpose-built for kick drum and other low-frequency instruments, including large toms, and bass cabinets. The Audix f6 drum mic is lightweight, compact, and easy to position. With a wide frequency response of 40Hz-16kHz and the ability to handle sound pressure levels of 140dB, the f6 is an excellent choice for miking instruments requiring extended low frequency reproduction.
Featuring the same depth and "no-EQ-necessary" performance as the Audix D6, the f6 boasts a little more midrange punch, also making it suitable for more aggressive styles of music, such as hard rock and punk. Another great benefit of Audix' purpose-built mics is the ease of placement—they sound great no matter where you place them (within reason), so a "walking" kick drum, or active performers bumping the mic is rarely a problem.
The Audix f6 has a hypercardioid pickup pattern for isolation and feedback control, and an LM (Low Mass) Type A diaphragm for natural, accurate sound reproduction. It employs a transformerless design for transparent reproduction, while its low-impedance, balanced output provides interference-free performance—even with long cable runs. It's roadworthy construction includes a precision cast zinc alloy body, black coat finish, laser etched model and serial number, steel mesh grill, gold XLR connector and a tension-fit heavy duty nylon mic clip.
The f6 is designed with low output in order to compensate for instruments having very high sound pressure levels. For kick drums, start with the mic inside the middle of the drum positioned slightly off-center, pointed towards the beater. For more attack, and less bass boom, move the mic closer to the beater. For less attack and more bass, move the mic further away from the beater. For kick drums without hole in front head, place the f6 a few inches from the head for a large dynamic sound. For toms, position the mic 2 inches from the head and point towards the center of the drum. For bass cabinets, position the mic 90° to the grill cloth and 1 - 2 inches inside the edge of the speaker.
- Compact, lightweight
- Cast zinc-alloy body
- LM (low mass) type A diaphragm
- Studio-quality sound
- Excellent mid-bass punch
- Handles high SPL without distortion
- Great for both studio and stage
- Roadworthy construction
- Designed, assembled, and tested by Audix in the USA.
- 3-year warranty
- Applications for stage and studio:
- Kick drum
- Kettle drum
- Floor tom
- Bass cabinets
- Leslie bottom
A multi-genre-spanning kick drum and bass instrument mic that makes placement and great sound easy. Order today!
F6 Kick Drum & Bass Frequencies Microphone Specifications:
- Transducer type: Dynamic
- Frequency response 40Hz - 16kHz
- Polar pattern: Hypercardioid
- Output impedance: 580 ohms
- Sensitivity: 0.6 mV/Pa@80Hz
- Off-axis rejection >23dB
- Maximum SPL: ≥140dB
- Power Requirements: None
- Capsule technology: LM Type A
- Connector: 3-pin gold-plated male XLR connector
- Polarity: Positive voltage on pin 2 relative to pin 3 of XLR connector
- Housing: Cast zinc alloy
- Finish: Black coat
- Weight: 11 oz. (311 g)
- Length: 4-3/4" (121 mm)