Audio-Technica ATW-1812 1800 Series Camera Mount UHF Wireless System

(Band D)  Sku #275093000544000

45 day price guarantee, 45 day return policy, 100% secure shopping

$549.00 Finance Now!

Order Now! Expected to ship 1/1/17

Platinum Coverage: (What’s This?)
Add to list
See All Audio-Technica Handheld Microphone Wireless Systems
Audio-Technica

A basic system equipped with all the professional 1800 Series features.

The Audio Technica ATW-1812 1800 Series Camera Mount UHF Wireless System includes ATW-R1810 single-channel receiver and an ATW-T1802 plug-on transmitter. The ATW-1812 offers UHF reception of 996 user-selectable frequencies in 25 kHz steps. The It also features automatic frequency scanning, Tone Lock squelch, back-lit LCD, soft-touch buttons, headphone monitor output with independent level control, and durable metal construction. It is an an extremely flexible, professional, and easy-to-use portable wireless system..

ATW-R1810 single-channel receiver

The Audio Technica ATW-R1810 single-channel receiver has true diversity operation: two antennas feed two completely independent RF sections on the same frequency; automatic logic circuitry selects the superior signal. The ATW-R1810 features BNC-type antennae connectors, output and monitor levels, a balanced XLR output and a LCD (Liquid Crystal Display) that shows battery status and frequency settings.

ATW-T1802 plug-on transmitter

The ATW-T1802 plug-on transmitter features a locking XLR connector for adapting dynamic and condenser microphones and selectable high and low transmission modes to conserve battery life/maximize power. The ATW-T1802 Plug-on Transmitter also provides power to condenser microphones rated to operate on 12V phantom power or less.

Consumer Alert:

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.

Features
  • Compact receiver is easy to mount on a camera
  • UHF reception with 996 frequencies selectable in 25 kHz steps
  • Automatic frequency scanning for easy selection of open channels
  • Tone Lock squelch system eliminates interference when transmitter is off
  • Headphone monitor output with independent level control
  • Battery fuel-level indicators on transmitters and receiver
  • Soft-touch controls for easy frequency selection
  • True Diversity operation for resistance to multi-path interference and dropouts
  • LCD frequency and battery status display with backlight
  • Antenna and AF Peak LED indicators
  • Transmitters operate in low or high transmission modes to conserve battery life/maximize power
  • Easy, user-friendly operation
  • Clear, natural sound quality
  • Powered by AA batteries
  • System components of the 1800 Series and 3000 Series Wireless Systems can be used interchangeably

A more affordable system and its all you need to capture audio as you film or tape a performer.

 

ATW-1812 1800 Series Camera Mount UHF Wireless System Specifications:

  • Overall System
    UHF Operating Frequencies: Band C: 541.500 to 566.375 Mhz; Band D: 655.500 to 680.375 MHz
    Number of Operating Frequencies: 996 total per band (25 kHz increments)
    Frequency Stability: ±0.005%, Phase Lock Loop frequency control
    Modulation Mode: FM
    Normal Deviation: ±10 kHz
    Operating Range: 300' (100 m) typical
    Operating Temperature Range: 23 F (- 5 C) to 113 F (45 C)
    Frequency Response: 70 Hz to 15 kHz

    ATW-R1810 single-channel receiver
    Receiving System: Dual independent RF sections, automatic-switching diversity
    Image Rejection: >50 dB typical
    Signal-to-Noise Ratio: 104 dB at 30 kHz deviation (A-weighted), maximum modulation 37 kHz
    Total Harmonic Distortion: <1% (±10 kHz deviation at 1 kHz)
    Sensitivity: 25 dBuV, (S/N 60 dB at 5 kHz deviation, A-weighted)
    Audio Output (balanced): 27 mV (at 1 kHz, ±5 kHz deviation)
    Output Connector: 3-pin mini XLR (TA3M-type)
    Monitor Headphone Output (typical): 35 mW max., 32 ohm load
    Monitor Headphone Jack: 3.5 mm TRS, signals on both Tip and Ring
    External Power Requirements: 12V DC nominal, 500 mA
    Batteries (not included): Four 1.5V AA alkaline
    Current Consumption (battery): 315 mA typical
    Battery Life: 10 hours typical, depending on battery type and use pattern
    Dimensions: 2.95" (75.0 mm) W x 4.92" (125.0 mm) H x 1.25 (32.0 mm") D
    Net Weight: (without batteries) 10.5 oz. (300 grams)
    Accessories Included: Two flexible UHF antennas; one 18" TA3F to XLRM
    output cable; belt pouch

    ATW-T1802 plug-on transmitter
    RF Power Output: High: 30 mW; Low: 10 mW, nominal
    Spurious Emissions: Under federal regulations
    Input connector: 3-pin locking XLRF-type
    Batteries (not included): Two 1.5V AA alkaline
    Current Consumption: High: 180 mA; Low: 160 mA, typical
    Battery Life: Approximately 6 hours (High); 8 hours (Low), depending on battery type and use pattern
    Dimensions: 1.57" (40.0 mm) W x 4.37" (11.1.0 mm) H x 1.57" (40.0 mm) D
    Net Weight (without batteries): 7.0 oz (199 grams)
review resources
Loading....