Audio-Technica AT2022 X/Y recording mic with 1/8" connector

Sku #H73905000000000

FREE SHIPPING on Almost Everything

Price Drop

$249.00 Finance Now! Special Promotions
  1. Price Drop

In Stock & Ready To Ship

Platinum Coverage: (What’s This?)
Add to list
See All Audio-Technica Condenser Microphones
Audio-Technica

Designed for general stereo recording and field sound capture, with excellent channel separation.

The AT2022 is a condenser microphone designed for stereo recording. Two unidirectional condenser capsules in an X/Y configuration pivot to allow for narrow (90º) or wide (120º) stereo operation. The capsules also fold flat for storage and transportation. Designed for general stereo recording and field sound capture, the AT2022 provides the spatial impact and realism of a live sound field. The microphone comes equipped with a stand clamp, AA battery, fuzzy windscreen and .5 m cable that terminates in a 3.5 mm stereo plug.

Features
  • X/Y stereo microphone with unique pivoting electret condenser capsules for ultimate flexibility
  • Provides the spatial impact and realism of a live sound field
  • Battery operation allows use with most recording devices
  • Switchable low-frequency roll-off minimizes pickup of unwanted low-frequency noise
  • User-selectable 90 or 120 stereo operation for narrow or wide pickup patterns
  • Ideal for general stereo recording and field sound capture
  • Excellent channel separation

Improve your stereo recordings at rehearsal, on stage, or in the field. Order today.

 

AT2022 X/Y recording mic with 1/8" connector Specifications:

  • Elements: Fixed-charge back plate, permanently polarized condenser
    Polar Pattern: X/Y Stereo
    Frequency Response: 20-20,000 Hz
    Low Frequency Roll-Off: 150 Hz, 6 dB/octave
    Open circuit sensitivity: -41 dB (8.9 mV) re 1V at 1 Pa
    Channel Balance: <2.5 dB
    Impedance: 200 ohms
    Maximum Input Sound Level: 122 dB SPL, 1 kHz at 1% T.H.D.
    Dynamic Range: (TYPICAL) 103 dB, 1 kHz at Max SPL
    Signal-to-noise Ratio: 75 dB, 1 kHz at 1 Pa
    Battery Type: 1.5V AA/UM3
    Warning: The AT2022 is designed for battery operation only. Do not attempt to use when phantom power is present. Possible damage to the microphone may result.
    Battery Current / Life: 1.2 mA / 500 hours typical (alkaline)
    Switch: Off, on/flat, on/roll-off
    Weitht: 270 g (9.5 oz)
    Dimensions: 192.0 mm (7.56") long,
    65.0 mm (2.56") maximum head diameter,
    21.0 mm (0.83") body diameter
    Ooutput Connector: Integral 3-pin XLRM-type
    Cable: 0.5 m (1.6') long, 3 conductor, shielded, vinyl-jacketed stereo cable with 3-pin XLRF-type connector at microphone end and 3.5 mm (1/8") TRS connector at output end
    Accessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; fuzzy windscreen; battery; soft protective pouch
review resources
Loading....