Open Box (Mint) 
Shure SLX14/85 Lavalier Wireless System

(Band G5)  Sku #501731004399000

45 day price guarantee, 45 day return policy, 100% secure shopping

$579.92 Finance Now!

Order Now! Expected to ship 6/12/16

Platinum Coverage: (What’s This?)
Add to list
See All Shure Lavalier Microphone Wireless Systems
Shure

Smart, hardworking wireless.

This Shure SLX Wireless Lavalier System includes a Shure SLX4 Diversity Receiver, a Shure WL185 Lavalier Condenser Microphone, and a Shure SLX1 Bodypack Transmitter.

Shure SLX4 Wireless Receiver
The SLX4 wireless receiver is a breeze to use with Automatic Frequency Selection and Automatic Transmitter Setup. With included rack hardware and detachable antennas, the SLX4 receiver is ready for immediate installation right out of the box.

Shure WL185 Cardiod Lavalier Condenser Microphone
The WL185 Lavalier Condenser Mic is recommended for general-purpose sound reinforcement applications that require good rejection of ambient noise. Shure highly recommends use of a windscreen, especially for outdoor events. The WL185 lavalier mic has a 1.2 meter (4 ft.) cable terminated with a miniature 4-pin mini connector. Shure includes a tie clip that can be rotated in 90-degree intervals for placement flexibility.

Shure SLX1 Bodypack Transmitter

The SLX1 bodypack transmitter is designed to hold up to the most adverse conditions. Whether used with headworn, Lavalier, instrument microphones, or with guitars or basses, the Shure SLX1 is the definition of reliability. SLX Wireless Systems feature Shure's patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.

Consumer Alert:

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.

Features
  • SLX4 Wireless Receiver:
  • Automatic Frequency Selection
  • Automatic Transmitter Setup
  • 960 Selectable frequencies across 24MHz bandwidth
  • Detachable 1/4 wave antennas
  • Microprocessor-controlled diversity
  • RF presence LED
  • 5-segment audio meter
  • Multi-function, backlit LCD
  • Low battery indicator
  • Frequency and power lockout
  • Rugged metal chassis
  • Volume control on rear of unit
  • 1/2 rack design
  • Furnished rack hardware
  • Non-slip bumpers for use out of rack
  • XLR and 1/4" outputs
  • WL185 Cardiod Lavalier Condenser Mic
  • Cardioid pickup pattern for good noise rejection
  • Pickup angle: 130-degrees
  • 1.2 meter (4 ft.) cable
  • Miniature 4-pin mini connector
  • Includes a 90-degree rotational tie clip
  • SLX1 Bodypack Transmitter
  • Automatic Transmitter Setup
  • Backlit LCD with timeout feature
  • Frequency and power lockout
  • 3-segment battery fuel gauge
  • 2 AA batteries (included) provide 8 hours of continuous use
  • 518 - 782 MHz operating range

Order today and enjoy Shure quality.

 

SLX14/85 Lavalier Wireless System Specifications:

  • SLX4 Wireless Receiver:
    Audio Output Level (ref. ± 38kHz deviation with 1kHz tone): XLR connector (into 600 Ohm load): ”13dBV; 1/4" connector (into 3000 Ohm load): ”2dBV
    Output Impedance: XLR connector: 200 Ohms; 1/4" connector: 1kohms
    XLR output: Impedance balanced; Pin 1: Ground; Pin 2: (+); Pin 3: (-)
    Sensitivity: ”105 dBm for 12 dB SINAD, typical
    Image Rejection: >70 dB, typical
    Power Requirements: 12”18 Vdc at 150 mA, supplied by external power supply
    Operating Range Under Typical Conditions: 300 ft. (100m)
    Note: Actual range depends on RF signal absorption, reflection, and interference
    Audio Frequency Response (+/” 2 dB): Minimum: 45 Hz: Maximum: 15 kHz
    Note: Overall system frequency depends on microphone element.
    Total Harmonic Distortion (ref. +/” 38 kHz deviation, 1 kHz tone): 0.5%, typical
    Dynamic Range: >100 dB A-weighted
    Operating Temperature Range: ”18 degree C (0 degree F) to +50 degree C (+122 degree F)
    Note: battery characteristics may limit this range
    Dimensions (H x W x D): 1.65 x 7.76 x 5.28 in., (42 x 197 x 134 mm)
    Weight: 1 lb. 13 oz. (816 g )
    Housing: Galvanized steel
    Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with
    respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.
    Logic Connections: Pin 1: Logic output, Transmitter Mute Status. Mute=low (0 V). Sinks up to 100 mA. Absolute maximum -0.7 to 5.5V DC; Pin 2: Logic ground; Pin 3: Logic output, Battery Status. Good=low (0 V). Sinks up to 100 mA; Absolute maximum -0.7 to 5.5V DC

    WL185 Cardiod Lavalier Condenser Mic
    Type: Condenser (electret bias)
    Frequency Response: 50 to 17,000 Hz
    Output Impedance: 1800 ohms
    Sensitivity (1 Pa = 94 dB SPL): -45.5dBV/Pa
    Maximum Sound Pressure Level: 130.5dB SPL
    Output Noise (A-weighted): 28.0dB SPL
    Dynamic Range: 102.5dB
    Polarity: Positive pressure on diaphragm produces positive voltage on pins 3 and 4 relative to pin 1
    Power Requirements: Regulated nominal +5 Vdc (1.5 Vdc to 10 Vdc) provided at microphone connector pin 2 relative to pin 1 of a Shure wireless microphone transmitter

    SLX1 Bodypack Transmitter
    Audio Input Level: -10 dBV maximum at mic gain position, +10 dBV maximum at 0 dB gain position, +20 dBV maximum at -10 dB gain position
    Gain Adjustment Range: 30dB
    Input Impedance: 1 Mohms
    RF Transmitter Output: 30 mW maximum (dependent on applicable country regulations
    Dimensions (H x W x D): 4.25 x 2.50 x 0.75 in. (108 x 64 x 19 mmD)
    Weight: 81 grams (3 oz.) without batteries
    Housing: Molded ABS case
    Power Requirements: 2 "AA" size alkaline or rechargeable batteries
    Battery Life: >8 hours (alkaline)
review resources
Loading....
write a review