Electro-Voice R300 Lavalier Wireless System in CaseProduct #H69208 Electro-Voice H69208 YNBD Lavalier Microphone Wireless Systems https://www.esnapw.com/rses/ESnapServlet?MerchantNumberSent=63655
- Write a Review
- Seen a Lower Price? Click Here.
45 day price guarantee, 45 day return policy, 100% secure shopping
Get more wireless for your money with this complete setup.
The Electro-Voice R300 Headworn Wireless System in case is a complete wireless setup that includes everything you need to communicate or interview in complete freedom. The convenient case contains the following components:
The R300 Receiver
The ULM18 Lavalier Microphone
The BP-300 Body Pack Transmitter
Equipped with a range of unique, world-tour-proven features, the R300 brings state-of-the-art EV wireless microphone engineering to an unprecedented price point - more professional wireless performance for less.
With a sleek, low-profile design and durable construction, the R300 receiver system is equally at home on a table top or in a 19-inch equipment rack. Its simple controls and easy-to-read display are designed to provide the ultimate in user-friendly operation. Rack-mount kits and front-mount antenna cables are available for professional installation. For applications with up to four receivers in one rack, the APD4+ antenna splitter can provide antenna and power feeds.
The ULM18 Lavalier Microphone
The all-new BP-300 metal bodypack transmitter is rugged, compact, and easy to use. Using two AA batteries for 14 hours of use, the BP-300 is one of the most economical transmitters available for day-to-day operation. The unit's mute function keeps the RF signal live while muting the audio, protecting your channel and preventing noise in the audio system. Two preconfigured bodypack systems are available, with either a lapel or a headworn microphone. The bodypack's TA4 connector allows the unit to be used with other Electro-Voice lapel or headworn microphones.
Proven at the highest level of touring and trusted in thousands of installations around the world, Electro-Voice's industry-leading ClearScan system scans through the R300's 32 preset channels and selects the clearest channel - all with the touch of a single button. In an increasingly challenging RF world, ClearScan gives you the confidence to go wireless without worry, ensuring noise-free operation and the longest operating range.
Matching the R300's transmitter and receiver frequencies is also as simple as the touch of a button. EZsync uses infrared technology to set the transmitter to the correct frequency, confirming operation in one automatic step. Error-free wireless setup has never been easier.
- ClearScan - find the clearest channel available with the touch of one button
- EZsync - infrared channel transfer from receiver
- to transmitter for easy, error-free setup
- ULM18 Lavalier Microphone element for
- crisp, clear vocals
R300 Lavalier Wireless System in Case Specifications:
- R300 Receiver
- Receiver Type: Synthesized PLL
- Frequency Range (RF):
- A Band 618 - 634MHz
- B Band 678 - 694MHz
- E Band 850 - 865 MHz
- Number of Channels: 32
- Modulation: +/- 40 kHz
- Diversity: Antenna
- RF Sensitivity: < 1.0 Î¼V for 12 dB SINAD
- Image Rejection: > 55dB
- Squelch: Tone Code plus Amplitude
- FCC Certification: Approved under Part 15
- Power Requirements: 12 - 16 VDC, 500mA max
- Operating Temperature: 5Âº to 45Âº C (41Âº to 113Âº F)
- 1.72" H x 7.8" W x 8.0" D
- 43mm H x 206mm W x 210mm D
- Audio Parameters
- Frequency Response: 80 - 18kHz +/- 2dB
- Balanced Output: -20 dBV (max @ 40 kHz deviation)
- Unbalanced Output: adjustable 8 mV to 0.755V RMS
- Distortion: <1.0%, 0.4% typical (ref 1kHz, 40kHz deviation)
- Signal-to-Noise Ratio: >100dB A Weighted
- Dynamic Range: >95dB
- Transmitters BP-300
- Radiated Output: 8 mW typical
- Standard Lavalier Microphone: EV ULM18 Uni-Directional Condenser
- TA4F Connector Wiring:
- Pin 1: Ground; Pin 2 Mic Input; Pin 3: +5V bias; Pin 4: N/C
- Power Requirements: Two AA Batteries
- Battery Life (Typical): > 14 hours with AA Alkaline Typical
- Bodypack Antenna: Flexible external Â¼ wave
- Dimensions (Bodypack):
- 3.3 in. H x 2.6 in. W x 0.89 in. D
- 84 mm H x 66 mm W x 23 mm D