Audio-Technica ATW-1813 1800 Series Camera Mount UHF Wireless System  

Product #275094

45 day price guarantee, 45 day return policy, 100% secure shopping

Unavailable

Item Note:

This product has been discontinued but may be available as a used item.

Similar Items

See All Audio-Technica Lavalier Microphone Wireless Systems
Audio-Technica

Professional camera-mount wireless that's easy, flexible, and reliable.

The Audio Technica ATW-1813 1800 Series Camera Mount UHF Wireless System includes ATW-R1810 single-channel receiver, ATW-T1801 UniPak body-pack transmitter, ATW-T1802 plug-on transmitter, and a Lavalier microphone. The ATW-1813 wireless mic system offers UHF reception of 996 user-selectable frequencies in 25 kHz steps. It also features automatic frequency scanning, Tone Lock squelch, back-lit LCD, soft-touch buttons, headphone monitor output with independent level control, and durable metal construction. It is a camera-mount wireless microphone system that is extremely flexible, professional, and easy-to-use.

ATW-R1810 single-channel receiver

The Audio Technica ATW-R1810 single-channel receiver has true diversity operation: two antennas feed 2 completely independent RF sections on the same frequency; automatic logic circuitry selects the superior signal. The ATW-R1810 features BNC-type antennae connectors, output and monitor levels, a balanced XLR output and a LCD (Liquid Crystal Display) that shows battery status and frequency settings.

ATW-T1801 UniPak body-pack transmitter

The ATW-T1801 UniPak body-pack transmitter features a professional locking 4-pin connector compatible with all Audio-Technica Wireless Essentials microphones. The ATW-T1801 transmitter offers selectable high and low transmission modes to conserve battery life/maximize power.

ATW-T1802 plug-on transmitter

The ATW-T1802 plug-on transmitter features a locking XLR connector for adapting dynamic and condenser microphones and selectable high and low transmission modes to conserve battery life/maximize power. It also provides power to condenser microphones rated to operate on 12V phantom power or less.

Features
  • Compact receiver is easy to mount on a camera
  • UHF reception with 996 frequencies selectable in 25 kHz steps
  • Automatic frequency scanning for easy selection of open channels
  • Tone Lock squelch system eliminates interference when transmitter is off
  • Headphone monitor output with independent level control
  • Battery fuel-level indicators on transmitters and receiver
  • Soft-touch controls for easy frequency selection
  • True Diversity operation for resistance to multi-path interference and dropouts
  • LCD frequency and battery status display with backlight
  • Antenna and AF Peak LED indicators
  • Transmitters operate in low or high transmission modes to conserve battery life/maximize power
  • Easy, user-friendly operation
  • Clear, natural sound quality
  • Powered by AA batteries
  • System components of the 1800 Series and 3000 Series Wireless Systems can be used interchangeably

A portable wireless solution for video of live performances.

 

ATW-1813 1800 Series Camera Mount UHF Wireless System Specifications:

  • Overall System
  • UHF Operating Frequencies: Band C: 541.500 to 566.375 Mhz; Band D: 655.500 to 680.375 MHz
  • Number of Operating Frequencies: 996 total per band (25 kHz increments)
  • Frequency Stability: ±0.005%, Phase Lock Loop frequency control
  • Modulation Mode: FM
  • Normal Deviation: ±10 kHz
  • Operating Range: 300' (100 m) typical
  • Operating Temperature Range: 23° F (- 5° C) to 113° F (45 ° C)
  • Frequency Response: 70 Hz to 15 kHz
  • ATW-R1810 single-channel receiver
  • Receiving System: Dual independent RF sections, automatic-switching diversity
  • Image Rejection: >50 dB typical
  • Signal-to-Noise Ratio: 104 dB at 30 kHz deviation (A-weighted), maximum modulation 37 kHz
  • Total Harmonic Distortion: <1% (±10 kHz deviation at 1 kHz)
  • Sensitivity: 25 dBuV, (S/N 60 dB at 5 kHz deviation, A-weighted)
  • Audio Output (balanced): 27 mV (at 1 kHz, ±5 kHz deviation)
  • Output Connector: 3-pin mini XLR (TA3M-type)
  • Monitor Headphone Output (typical): 35 mW max., 32 ohm load
  • Monitor Headphone Jack: 3.5 mm TRS, signals on both Tip and Ring
  • External Power Requirements: 12V DC nominal, 500 mA
  • Batteries (not included): Four 1.5V AA alkaline
  • Current Consumption (battery): 315 mA typical
  • Battery Life: 10 hours typical, depending on battery type and use pattern
  • Dimensions: 2.95" (75.0 mm) W x 4.92" (125.0 mm) H x 1.25 (32.0 mm") D
  • Net Weight: (without batteries) 10.5 oz. (300 grams)
  • Accessories Included: Two flexible UHF antennas; one 18" TA3F to XLRM
  • output cable; belt pouch
  • ATW-T1801 UniPak body-pack transmitter
  • RF Power Output: High: 30 mW; Low: 10 mW, nominal
  • Spurious Emissions: Under federal regulations
  • Dynamic Range: >105 dB, A-weighted
  • Input Connections: High impedance, low impedance, bias
  • Batteries (not included): Two 1.5V AA alkaline
  • Current Consumption: High: 180 mA; Low: 160 mA, typical
  • Battery Life: Approximately 6 hours (High); 8 hours (Low), depending on battery type and use pattern
  • Dimensions: 66.0 mm (2.60") W x 87.0 mm (3.43") H x 24.0 mm (0.94") D
  • Net Weight (without batteries): 2.8 oz (80 grams)
  • Accessories Included: one omnidirectional lavalier microphone
  • ATW-T1802 plug-on transmitter
  • RF Power Output: High: 30 mW; Low: 10 mW, nominal
  • Spurious Emissions: Under federal regulations
  • Input connector: 3-pin locking XLRF-type
  • Batteries (not included): Two 1.5V AA alkaline
  • Current Consumption: High: 180 mA; Low: 160 mA, typical
  • Battery Life: Approximately 6 hours (High); 8 hours (Low), depending on battery type and use pattern
  • Dimensions: 1.57" (40.0 mm) W x 4.37" (11.1.0 mm) H x 1.57" (40.0 mm) D
  • Net Weight (without batteries): 7.0 oz (199 grams)
review resources
Loading....
write a review