Studio Electronics Boomstar Modular Attenulag
- Write a Review
- Seen a Lower Price? Click Here.
45 day price guarantee, 45 day return policy, 100% secure shopping
Essential utility module.
Attenulag is a basic but indispensable through-hole synthesizer necessity designed and assembled in-house by our fine feathered friends at Boomstar. With it, you can augment efficiency and expressiveness starting with Boomstar’s handy R (Router) and ascending to its larger and more complex ATTENULAG companion for voltage-controlled switching, gliding, combining and amplitude limiting.
ATTENULAG is a multi-purpose device. The attenuators reduce level, audio or CV when the switch is set to off. With the switch up, the audio/signal passes through at full level. The inputs are linked together: patching into channel 1 drives both attenuators; patching into channel 2 breaks the link.
The two lag circuits provide a handy CV mult/hub for oscillator and filter tracking and are linked together: if you patch into channel 1 only, the outputs of both channels are drive; patching into channel 2 breaks the link and they become two separate CV mult/lag circuits.
ATTENUATE 1, ATTENUATE 2, LAG TIME 1, LAG TIME 2.
OFF: the top two handle attenuation duties; the bottom are wired to lag time.
Ten Patch Points
ATTENUATE 1: IN, OUT; LAG TIME 1: IN, OUT 1A, OUT 1B, OUT 1C; ATTENUATE 2: IN, OUT; LAG TIME 2: IN, OUT 2A, OUT 2B, OUT 2C
- ATTENUATE – Level reduction.
- IN – Attenuation input.
- OUT – Attenuation output.
- OFF – Bypass is in up position.
- LAG TIME – Exponential slewing amount—still affectionately called glide in some quarters.
- IN - Lag input.
- OFF – Lag bypass.
- OUT A – Lag output A.
- OUT B – Lag output B.
- OUT C – Lag output C.
- Size - 10hp
- Depth - 25mm with ribbon cable attached
- Power Usage - 7mA, 8mA (+12 / -12)
Perfect levels all the time. Order today.