Shure PGXD14/PG30 Digital Wireless System with PG30 Headset MicProduct #H68498 Shure H68498 YNBB Headset Microphone Wireless Systems https://www.esnapw.com/rses/ESnapServlet?MerchantNumberSent=63655
- Write a Review
- Seen a Lower Price? Click Here.
45 day price guarantee, 45 day return policy, 100% secure shopping
- Buy New
This product has been discontinued but may be available as a Open Box item.
An affordable digital wireless system with high-quality, hands-free performance.
The PGXD14/PG30 Digital Wireless System from Shure adds the clarity of 24-bit digital audio to the legacy of trusted Shure microphone options for wireless performance. This system includes the PG30 Headset Mic, PGXD1 bodypack transmitter, and a PGXD4 receiver.
The PC30 is an electret condenser microphone for headworn use with a wireless bodypack transmitter. It has a comfortable wireframe for secure fit and has a smooth, natural frequency response comparable to handheld microphones to give you excellent sound in a convenient, hands-free solution.
The rugged PGXD1 bodypack transmitter easily clips onto a belt or guitar strap, and provides you with a 20Hz - 20kHz frequency range, up to 10 hours of continuous use on 2 standard AA batteries (not included), and 200' of wireless freedom.
The PGXD4 receiver offers 24-bit/48kHz technology for incredibly accurate sound, auto frequency selection, and greater reliability thanks to its true digital diversity.
Consumer Alert:Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.
- PGXD1 transmitter
- Rugged, compact bodypack with belt clip
- 20Hz “ 20kHz frequency range captures every nuance of your tone
- Power, mute, and battery status LED
- Up to 10 hours of continuous use from 2 AA batteries
- 200' (60m) operating range
- 26dB of continuously adjustable gain to match variable input levels
- PGXD4 Wireless Receiver
- 24-bit / 48kHz digital technology for incredibly accurate sound
- Automatic frequency selection locates a clear channel instantly
- One-touch sync automatically syncs the transmitter and receiver
- True digital diversity delivers rock-solid wireless signal reliability
- Up to 5 systems can be used at once
- 1„4" and XLR audio outputs
- Included padded carrying case for portability and protection
- Comfortable wireframe for secure fit
- Smooth, natural frequency response comparable to quality handheld microphones
Order this wireless headset mic system today and free up your hands today.
PGXD14/PG30 Digital Wireless System with PG30 Headset Mic Specifications:
- PGXD1 transmitter
Audio input level: +10 dBV maximum, at minimum gain setting -16 dBV maximum, at maximum gain
Gain adjustment range: 26dB
Input impedance: 1MÎ
RF Output Level: 10 mW maximum (dependent on applicable country regulations)
Dimensions (HxWxD): 108mm x 64mm x 19mm (4.25" x 2.50" x 0.75")
Weight: 128g (4.5oz.) without batteries
Housing: Molded polycarbonate case
Battery Life: Up to 10 hours
Dimensions (HxWxD): 40mm x 181mm x 104mm (1.6" x 7.125" x 4.1")
Weight: 289g (10.2oz.)
Audio Output Level (ref. ±38kHz deviation, 1kHz tone): XLR connector (into 3000Î load): -2.5dBV 1/4" connector (into 10000Î load): +10 dBV
Sensitivity: -102 dBm @ 10-5 BER
Image rejection: > 70dB, typical
Impedance balanced Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio
Red: 2dB below clip
Amber: 12dB below clip
Green: 50dB below clip
Power Requirements: 12-18 Vdc at 150 mA, supplied by external power supply
Pin Assignments: XLR: 1 = ground, 2 = hot, 3 = cold 6.35mm (1/4") TRS: Tip = audio, Ring = no audio, Sleeve = ground
Polar pattern: Cardioid (unidirectional)
Output impedance: 1200Î @1kHz
Output level: -52dBV/Pa(2.5mV)
Signal-to-noise ratio: 61dB, 1kHzat1Pa
Maximum SPL: 125dB
Dynamic range (max.SPLtoA-weightednoiselevel): 92dB
Output Noise: 33dB (typical, A-Weighted)
Recommended Operating Voltage: +5VDC, 10V max (pin 2 to pin 1)
Polarity: Positive sound pressure on diaphragm produces positive voltage on pins 3 and 4relative to pin 1 (ground) on the mini TA4F connector
Cable: 1.27m (50") two-conductor shielded
Connector: Mini TA4F
Net Weight: 51.6g (1.82oz)