Galaxy Audio ECM Headset Wireless System
Headset Microphone Wireless Systems
- Write a Review
- Seen a Lower Price? Click Here.
FREE SHIPPING on Almost Everything
Wireless headset system for energetic, dance-oriented performance or leading exercise classes.
The ECM Headset Wireless System includes the ECMR Receiver and MBP52 Body Pack with 52HS Head Set Microphone
The ECMR Wireless Receiver
The ECMR Wireless Receiver is an economical solution to a great wireless microphone system. The ECMR has 16 selectable channels, IR Sync, Diversity Antennas mounted to the front of the rugged plastic casing.
HH52 / MBP52 Wireless Transmitters
The ECMR can be used and will sync with either the HH52 or MBP52 transmitters. The HH52 has a gain control and an on/off switch. Both transmitters are powered by 2AA batteries. The MBP52 body pack transmitter has a 0/-10/Mic selector switch.
52HS Head Set Microphone:
The 52HS has a unidirectional pickup pattern to reduce feedback and a wide frequency response of 50Hz-18kHz for full-range vocal reproduction.
- 16 swelectable channels
- 200' range
- UHF frequency
- Diversity antennas
- Output volume control
- AF level indicator
- IR sSync
- Squelch adjustment
- XLR / ¼" outputs
- Rugged plastic casing
- IR Sync
- 2 AA batteries
- 3-position switch
- Low-battery indicator
- 2.8 oz. (80 g)
- Unidirectional headset microphone
- Freq. Response: 50Hz-18kHz
Channel your inner Madonna with this highly affordable wireless headset system. Order today!
ECM Headset Wireless System Specifications:
- ECMR Reciever:
- Audio Output Level: (+/-30KHz deviation, 1KHz tone) XLR connector (into 600 ohm load) -12dBV ¼" connector (into 3k ohm load) -18dBV
- Output Impedance: XLR connector 200Ohms ¼" connector 1KOhms
- XLR output: Impedance balanced
- Pin1：Ground (cable shield)
- Pin3：No Audio
- Sensitivity: -93dBm for 30dB
- Image Rejection: >90dB
- Dimensions: 1-3/4" x 9-1/4" x 4-3/4"
- (44.45mm H x 235mm W x 121mm D)
- Weight: .85 lb. (.39kg)
- Power Requirements: 13.5 V dc at 300mA, supplied by external power supply.
- MBP52 Bodypack Transmitter:
- Max audio input level: 0dBV to +10dBV
- Gain adjustment range: 20dB
- Input impedance: 5k ohm
- Dimensions: 3-5/16" x 2-5/8" x 1" (85mm H x 65mm W x 24mm D)
- Weight: 3.0oz (85 g) (without batteries)
- Power requirements: 2 AA batteries (alkaline or rechargeable)
- Battery life: Approx. 8 hours
- 52HS Head Set Microphone:
- Sensitivity: -65 ± 4dB (0dB=1V/UBR 1kHz)
- Frequency response: 50 Hz-18kHz
- Output impedance: 2k ohm max. (RL-2.2k ohm)
- Directionality: Unidirectional
- Working voltage range: 1 ~ 10V
- Standard working voltage: 3V
- Current Consumption: 250UA (Max.)
- Maximum input sound pressure: 110dB SPL
- S/N ratio: >38dB