Shure ULXP24/SM86 Handheld Wireless Microphone System  

Product #270796

45 day price guarantee, 45 day return policy, 100% secure shopping

$919.00 Finance Now!

MSRP: $1,149.00   You Save: $230.00 (20%)

Select a Style to Continue
Platinum Coverage: (What’s This?) most popular
Add to list
See All Shure Handheld Microphone Wireless Systems
Shure

Professional grade.

The Shure ULXP24/SM86 is a professional quality wireless handheld microphone system that features the ULXP4 Diversity Receiver and the ULX2 Handheld Transmitter fitted with the SM86 Handheld Mic. ULX Standard UHF systems represent a breakthrough in performance and price for both working musicians and professional sound installers. ULX Professional systems offer more advanced features and controls, including lockable settings and group scan function. Over 1400 selectable, pre-programmed frequencies are available, and Automatic Frequency Selection provides a straight shot to a clear channel.

ULXP4 Wireless Diversity Receiver

The expanded feature set of the ULXP4 wireless receiver, with advanced settings and controls including lockable settings and group scan, offers a direct path to full, clear audio signals. The ULXP4 offers an exceptional value in both performance and price, for both working musicians and sound installers.

ULX2 Handheld Transmitter

The ULX2 Handheld Transmitter has a 3-segment battery fuel gauge, Backlit LCD shows group and channel, Frequency and power settings, and Control lockout.

SM86 Vocal Microphone

The Shure SM86 is a unidirectional (cardioid) condenser vocal microphone for professional use in live performance. An extremely rugged microphone, the SM86 withstands the rigors of touring while delivering studio-quality sound. The tailored frequency response of the SM86 reproduces vocals with clarity. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The built-in three-point shock mount minimizes handling noise, and a two-stage pop filter reduces wind and breath "pop" noise.

Features

ULXP4 Wireless Diversity Receiver

  • Automatic Frequency Selection with group scan function
  • Over 1400 selectable frequencies
  • 5-segment transmitted audio signal strength meter
  • RF indicator
  • 3-segment transmitter battery fuel gauge
  • Advanced multi-function LCD displays group and channel
  • Mic/Line switch
  • Remotable 1/2-wave antenna
  • XLR and 1/4-inch output
  • Rugged plastic chassis
  • 1/2 rack design

ULX2 Handheld Transmitter

  • 8-9 Hour Battery Life
  • Power: On/Off Switch, Battery
  • LED-Green When ON, Red When Battery Low
  • Three-segment Battery Power Icon
  • PEAK Icon-Appears When Audio Signal Overloads
  • Group/Channel Displays
  • SET Button for Saving Settings
  • Adjustable Audio Gain Control
  • Input Attenuation Switch-Select 0dB for Voice/Low Output; 20dB for High Output
  • 4-pin Mini Connector
  • Battery Cover Unscrews to Expose Battery and Gain Control
  • 9V Battery Included

SM86 Vocal Microphone

  • Condenser cartridge for studio quality sound
  • Tailored frequency response for a clear reproduction of vocals
  • Rugged construction withstands the rigors of touring sound
  • Cardioid polar pattern minimizes unwanted background noise
  • Excellent choice for stage monitors and personal monitors
  • Built-in three-point shock mount minimizes handling noise
  • Two-stage "pop" filter reduces wind and breath noise

Order today and enjoy the best in wireless.

 

ULXP24/SM86 Handheld Wireless Microphone System Specifications:

  • RF Carrier Frequency Range: 554.000 to 865.000 MHz (Available frequencies depend on the applicable regulations in the country where the system is
  • used). Refer to the frequency supplement supplied with the system.
  • Effective Range: 100 m (300 ft.) under optimal conditions (NOTE: Actual working range depends on RF signal absorption, reflection, and interference)
  • Audio Frequency Response: 25 to 15,000 Hz, ± 2dB (NOTE: Overall system frequency response depends on the microphone element.)
  • ULXP4 Receiver Input
  • Connector: Antenna Power Input
  • Connector Type: BNC IEC 320
  • Actual Impedance: 50 Ohms
  • Nominal Input Level: —95 to —30 dBm 15 Vdc
  • Maximum Input Level: +6 dBm (—20 dBm recommended) 18 Vdc
  • Pin Assignments: Shell = Ground Center = Signal IEC Standard
  • Voltage for Remote Power: 12 Vdc, 150 mA maximum
  • ULXP4 Receiver Output
  • Connector: High Z Audio; Low Z Audio
  • Output Configuration: High Z Audio Unbalanced (1/4 in.); Low Z Audio Balanced (XLR)
  • Actual Impedance: High Z Audio 3 k0hms; Low Z Audio 22
  • Nominal Input Level: High Z Audio Pin Assignments: Tip = Hot Ring/ Sleeve = Gnd: Low Z Audio 1 = Ground 2 = Hot 3 = Cold
  • Voltage/Current/Phantom: Power Protection?: High Z Audio; Yes Low Z Audio Yes
  • Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive
  • voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output
  • Transmitter Gain Adjustment Range: ULX2: 25 dB
  • Receiver Audio Output Level (± 38 kHz deviation, 1 kHz tone):
  • XLR connector (into 600 ohm load): +3.9 dBV (line), —17 dBV (mic)
  • 1/4 inch connector (into 3000 ohm load): —2 dBV
  • Impedance
  • ULX1 (input): 1 Megohm ULXS4, ULXP4 (output): 50 ohms at line level; 2000 ohms at mic level
  • Modulation: ± 38 kHz deviation compressor-expander system with pre- and de-emphasis.
  • RF Power Output: ULX2: 30 mW maximum
  • Dynamic Range: >100 dB, A-weighted
  • RF Sensitivity: 1.26 uV for 12 dB SINAD (typical)
  • Image Rejection: 80 dB typical
  • Spurious Rejection: 75 dB typical
  • Ultimate Quieting (reference ± 38 kHz deviation): >105 dB, A-weighted
  • System Distortion (reference ± 38 kHz deviation, 1 kHz modulation): 0.3% total harmonic distortion, typical
  • Power Requirements: ULX2: 9V alkaline battery; 8.4 V Nicad optional; ULXS4: 14 - 18 Vdc (negative ground), 550 mA
  • Battery Life: 8 to 9 hours (with 9V alkaline battery)
  • Operating Temperature Range: - 20 degrees to 49 degrees C (- 4 degrees to 120 degrees F)
  • NOTE: Battery characteristics may limit this range.
  • Dimensions (Length x Diameter): ULX2/86: 9.5 x 2 in. (241 x 51 mm);
  • Dimensions (H x W x D): ULXP4: 1.72 in. x 8.56 in. x 6.88 in. (43 mm x 214 mm x 172 mm)
  • ULX2/58: 10.4 oz. (295 g) without battery
  • ULXP4: 2 lbs 7 oz. (1105 g)
  • SM86 Vocal Microphone
  • Transducer Type: Condenser (electret bias)
  • Frequency Response: 50 to 18,000 Hz
  • Polar Pattern: Cardioid
  • Output Impedance: 150 Ohms at 1 kHz (Recommended minimum load impedance: 600 Ohms)
  • Sensitivity (at 1,000 Hz): Open Circuit Voltage: -50 dBV/Pa (3.15 mV)
  • (1 Pa = 94 dB SPL)
  • Output Clipping Level: 1000 Ohm Load at 1,000 Hz: +3 dBV (1.41 V)
  • Maximum SPL (at 1,000 Hz): 1000 ohm load (1% THD): 147 dB
  • Self-Noise: 23 dB typical, A-weighted
  • Dynamic Range (1000 ohms): 124 dB (maximum SPL to A-weighted noise level)
  • Signal-to-Noise Ratio: 71 dB at 94 dB SPL (IEC 651) (S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted)
  • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector.
  • Power: Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3
  • Current Drain: 5.2 mA
  • Connector: Three-pin (XLR) professional audio
  • Dimensions (Length x Diameter): 7.2" x 1.92" (183 x 49 mm)
  • Net Weight: 9.8 oz (278 grams)
  • Environmental Conditions: Operating: -18 degrees to 60 degrees C (0 degrees to 135 degrees F) (relative humidity >90%); Storage: -29 degrees to 74 degrees C (-20 degrees to 165 degrees F) (relative humidity >80%)
review resources
Loading....
write a review