Gibson Zakk Wylde Vertigo Les Paul Custom Electric Guitar  

Product #H84885

45 day price guarantee, 45 day return policy, 100% secure shopping

Unavailable

Item Note:

This product has been discontinued but may be available as a Open Box item.

Similar Items

See All Gibson Solid Body Electric Guitars
Gibson

A savage Les Paul for one of rock's fiercest talents.

Distinguished as one of the most savage players in all of rock, Zakk Wylde has made his mark on everything from the tours and recordings of Ozzy Osbourne, to his own Black Label Society, to a wide range of solo outings and collaborations. Throughout it all, his outlandish style has been every bit as distinctive as his searing solos and eviscerating tone”as witnessed once again on the Zakk Wylde Vertigo Les Paul. High on personality and loaded with tone, this guitar from Gibson USA exhibits a playful new twist on Zakk' trademark œbullseye graphics, with a vertigo-inducing œtwisted bullseye that creates an optical illusion that' nearly as powerful as the music that you™ll make with it. The Zakk Wylde Vertigo Les Paul features all the traditional tonewoods and craftsmanship that have made the Les Paul a legend, along with Zakk' preferred specs for optimum playability, and his choice of kicking EMG„¢ active humbucking pickups for unparalleled output and sustain.

To craft the body of the Zakk Wylde Vertigo Les Paul, Gibson USA starts with the timeless pairing of a solid Grade-A maple top and a mahogany back, which work together to blend sonic depth, richness and clarity. The mahogany body uses traditional weight relief which retains resonance while reducing overall weight. A solid one-piece, quarter-sawn Grade-A maple neck is glued in with a traditional mortis & tenon joint, and carved to measure .818 at the 1st fret and .963 at the 12th. It is finished in natural satin for a comfortable, played-in feel, and topped with a Grade-A maple fingerboard with Zakk' preferred custom fret wire. In addition to the striking Vertigo graphic atop a natural finish, and the back' contrasting Ebony Black finish”all in genuine nitrocellulose lacquer”the Zakk Wylde Vertigo Les Paul carries several Custom-style appointments such as 7-ply top binding, 5-ply back binding, multi-bound headstock with acrylic inlays. Furthermore, the back of the headstock displays a black Zakk silhouette decal, and the entire run will have a unique sequential serial numbering from œZWVTO 001 on up.

The Zakk Wylde Vertigo Les Paul is powered by Zakk' choice of an EMG-85„¢ humbucker in the neck and an EMG-81„¢ humbucker in the bridge, partnered by independent volume and tone controls for each, and a three-way selector switch. These active humbuckers are the first choice of many thrash, shred and metal players, and they yield unparalleled output and sustain for utterly demolishing neck pickup tones and incendiery bridge tones, yet with impressive clarity and a frequency response unmatched by any other pickup available. It all stays locked and loaded in the hardware department with the classic pairing of Tune-o-matic bridge and stopbar tailpiece, along with a set of high-quality Grover„¢ tuners with kidney buttons.



The swirling look was inspired by the graphics used on the poster for Alfred Hitchcock' classic movie, Vertigo. It was a guitar design that Zakk first imagined back in the ™80s.

Features
  • Mahogany body with Vertigo "Bullseye" Maple top
  • Mahogany neck with Zakk's rounded profile
  • EMG-85„¢ and EMG-81„¢ active humbucking pickups in the neck and bridge
  • Tune-o-matic bridge and stopbar tailpiece

Let your wild self go into the vertigo and beyond. Order today.

 

Zakk Wylde Vertigo Les Paul Custom Electric Guitar Specifications:

  • Body
    Top: Maple
    Back: Mahogany
    Binding: 7-Ply White/Black on Top, 5-Ply White/Black on Back
    Adhesive: Franklin Titebond
    Neck
    Species: Maple
    Profile: Rounded
    Truss Rod: Traditional
    Joint Angle: 4 (+/- 15 seconds)
    Adhesive: Franklin Titebond
    Neck Fit
    Joint: Mortise & Tenon
    Adhesive: Franklin Titebond
    Joint Angle Tolerance: +/- .005"
    Fingerboard
    Species: Maple
    Frets: 22
    Radius: 12"
    Scale Length: 24.75"
    Binding: White
    Inlays: Acrylic Block
    Nut/E.O.B: 1.695/2.260
    Nut
    Material: Corian
    Width: 1.695
    Slots: Gibson PLEK System
    Headstock
    Inlay: Acrylic Split Diamond
    Logo: Acrylic 'Gibson'
    Back: Zakk Decal
    Angle: 17 Degrees
    Binding: Multi-ply
    Truss Rod Cover Black/White Antique Bell
    Tuners
    Model: Grover„¢ Kidney
    Plating: Chrome
    Tuning Ratio: 14:01
    Bridge
    Type: Tune-O-Matic
    Material: Zamak
    Plating: Chrome
    Tailpiece
    Type: Stop Bar
    Material: Zamak
    Plating: Chrome
    Hardware
    Knobs: Black Speed Knobs
    Pickup Mounting Rings: Black
    Control Plate: Cover Black
    Strings: .010 - .046
    Strap Buttons: Aluminum
    Pickups
    Neck Position: EMG-85„¢ (Alnico V)
    Bridge Position: EMG-81„¢ (Ceramic)
    Electronics
    Potentiometers: 2 Volume Controls, 2 Tone Controls
    Toggle Switch: Three-way Switchcraft with Black Plastic Tip
    Output Jack: Traditional ¼"
    Finish
    Sealer: Nitrocellulose Lacquer Vertigo
    Case
    Type: Gibson Hardshell
    Case Exterior: Black
review resources
Loading....
write a review