Recording King RU-998 Metal Resonator UkuleleProduct #423797 Recording King 423797 TAU Ukuleles https://www.esnapw.com/rses/ESnapServlet?MerchantNumberSent=63655
- Write a Review
- Seen a Lower Price? Click Here.
FREE SHIPPING on Almost Everything
The resonating tone of traditional Americana, in a 4-string bell brass ukulele.
Made from an entirely European bell brass body and featuring a 6" hand-spun Continental cone, this Recording King resonator ukulele adds a unique twist to the classic Hawaiian instrument. This rare ukulele model features a mahogany neck, rosewood fretboard, Champion-style friction tuners, pearloid headstock overlay and a bell brass coverplate.
These excellent features give the traditional instrument fantastic projection and a bark that is uncommon yet very appealing among ukuleles. Includes featherweight case.
- Body: Nickel-plated bell brass
- Neck: Mahogany
- Fretboard: Rosewood
- Cone: Hand-spun aluminum
- Cone: Continental, 6"
- Coverplate: Roundhole
- Headstock: Plated Recording King logo
- Headstock overlay: Pearloid
- Tailpiece: Bell brass
- Bridge: Hard maple
- Position markers: Mother-of-pearl dot
- Tuners: Champion-style friction
RU-998 Metal Resonator Ukulele Specifications:
- Nut width: 1-3/8"
- Scale length: 15"
- Depth: 2.5"
- Upper bout: 5-7/8"
- Lower bout: 7-5/8"
- Body length: 10-5/8"
- Total length: 23"
Reviewed by 1 customer
Displaying review 1
Comments about Recording King RU-998 Metal Resonator Ukulele:
The most mellow sound is when any uke is strummed at the joint of the neck and the body.When strummed with the pad of the finger rather than a fingernail, a resonator can be used for a love song or a lullaby. But, moving down toward the cone using a fingernail or a pick produces a much different sound. A reso has the widest range of sounds of any four string uke. Set up with a low G string makes it a "must have" for Blues and Jazz. Using an allen wrench under the strings at the neck will raise them so you have a slide blues uke..or Hawaiian. It quickly goes back to a standard GCEA tuning rather than GCEG slack key and regular strumming style. It will mix it up with the Bluegrass set and have a sound that says it belongs.
Being bell brass gives it some noticeable weight. A strap is highly suggested for stand up playing.
With no opening on the front bout, the sound seemed to be lacking the higher frequency sounds, By drawing a design on a piece of masking tape one inch square (round-heartshaped- your initials- ??) use a 3/ 32 bit which has never cut steel to drill a series of predetermined holes no closer than 3/ 16ths from each other to creat your own forward grilles.
There are many more expensive resonator ukes. There is a distinctive sound with brass that galvanised tin or wood do not have. Mine still gets played quite a bit. It would be my choice for an economical "only one reso" uke. It is an attention-getter, both for its looks and its sounds.