American DJ 5-Pin Male to 3-Pin Female XLR Turnaround DMX Cable
- Write a Review
- Seen a Lower Price? Click Here.
FREE SHIPPING on Almost Everything
- Buy New
Link your intelligent fixtures and controllers.
This Connector features 22 AWG stranded (0.15 x 19 ) tinned copper conductors, polyethylene insulation, twisted pair, polyethylene inner jacket, Duofoil (100% coverage) and cotton plus a tinned copper braid shield (85% coverage). PVC jacket.
5-Pin Male to 3-Pin Female XLR Turnaround DMX Cable Specifications:
Number of Pairs: 2
Total Number of Conductors: 4
Stranding: 0.15 x 19
Conductor Diameter: .0354"
Conduct or Material: TC-Tinned Copper
Insulation Material: PE Polyethylene
Lay Length: 1.1"
Direction: Left Hand Lay
Twists: 10.9 per foot
Inner Jacket Material: PE- Polyethylene
Inner Jacket Diameter: .055"
Pair Color Code: Green/Black/Red/White
Outer Shield Trade Name: Duofoil
Outer Shield Type: Tape/Braid
Outer Shield Material
Layer 1: Material Trade Name--Duofoil, Type--Tape, Material--Aluminum Foil-Polyester, Coverage %--100
Layer 2: Material Trade Name--Duofoil, Type--Braid, Material--TC-Tinned Copper, Coverage %--85
Outer Jacket Material: PVC-Polyvinyl Chloride
Overall Nominal Diameter: .295"
Operating Temperature Range: -30 degrees C To + 75 degrees C
Bulk Cable Weight: 50 lbs./1000
Minimum Bend Radius (Install): 3.5"
Maximum Recommended Pull Tension: 22 lbs.
Nominal Characteristic Impedance: 110 Ohms
Nominal Capacitance Conductor to Conductor @ 1KHz: 12.5 pF/foot
Nominal Cap Cond. To Other Cond. & Shield @ 1KHz: 23 pF/foot
Nominal Velocity of Propagation: 76%
Nominal Delay: 1.6 Nanoseconds per foot
Nominal Conductor DC Resistance @ 20 degrees C: 24 Ohms/1000 feet
Individual Pair Nominal Shield DC Resistance @ 20 degrees C: 15 Ohms/1000 feet
Nominal Attenuation (dB/100 feet): 0.6 (@ 1 MHz) dB/100 feet
Maximum Recommended Current: 2.1 Amps per conductor @ 25 degrees C
REVIEW SNAPSHOT®by PowerReviews
Reviewed by 1 customer
Displaying review 1
Comments about American DJ 5-Pin Male to 3-Pin Female XLR Turnaround DMX Cable:
The turnaround works great, however when plugged into my High End Systems Road Hog console it would not lock in. I had to use a grinder and grind down the "grips" on the plug so it would go in far enough to clip into place. Not hard to do or time consuming, just necessary. Great product for the price, just get out your grinder and black spray paint!!