|
dbx DriveRack 260 Complete Equalization and Loudspeaker Control System
dbx 260 Complete EQ & Loudspeaker Control System
The 260 capitalizes on the road tested and contractor approved nature of the other products in the DriveRack line. The 260 provides full bandpass and crossover configurations as well as independent output processing and a full time RTA for live sound applications. Contractors will appreciate its control inputs for wall-panel logic control and the patent-pending Advanced Feedback Suppression (AFS).
The DriveRack 260 continues the legacy of DriveRack series, which has been created by the company that has been redefining the standard of signal processing for more than 30 years. The DriveRack 260 was designed with the purpose and vision of providing state-of-the-art signal processing, while utilizing a simple and intuitive user interface. This goal has been achieved by offering two independent channels of processing power with a linkable 28-Band Graphic Equalizer, industry-standard dbx stereo compressor module, feedback eliminator and the 120A Subharmonic Synthesizer on the input, with a six channel output system that includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts) and alignment delay. These features combined with the Wizard setup system and complete DriveWare GUI control represent a methodical design that is guaranteed to deliver optimal, all-inclusive processing in a completely scalable system.
An incredible range of live sound control in one unit. Order your DriveRack 260 today!
- Analog Inputs
- Number of inputs: (2) line inputs, (1) RTA mic input
- Connectors: (2) female XLR line inputs, XLR RTA mic input
- Type: Electronically balanced/RF filtered
- Impedance: >40 k ohm
- Max input line level: +34dBu with input jumpers in +30 position
- CMRR: >45 dB
- RTA mic phantom voltage: +15 VDC
- RTA mic EIN: <-110 dBu, 22 Hz - 22 kHz, 150 ohm
Analog Outputs
- Number of outputs: 6
- Connectors: Male XLR
- Type: Electronically balanced, RF filter
- Impedance: 120 ohms
- Max output level: +22dBu
A/D Performance
- Type: dbx Type IV conversion system
- Dynamic range line: >114 dB A-weighted, >112 dB unweighted
- Type IV dynamic range: >119 dB, A-weighted, 22kHz BW; >117 dB, A-weighted, 22kHz BW
- Sample rate: 48 kHz
D/A Performance
- Dynamic range: 112 dB A-unweighted, 110 dB unweighted
System Performance
- Dynamic range: 110 dB unweighted, >107 dB weighted
- THD + N: 0.002% typical at +4 dBu, 1 kHz, 0 dB input gain
- Frequency response: 20 Hz-20 kHz, +/-0.5 dB
- Interchannel crosstalk: >110 dB, 120 dB typical
- Crosstalk input to output: >100 dB
|
Standard Features
| Alignment Delay |
yes |
| Analog Ins |
xlr |
| Analog Outs |
xlr |
| Channels |
2 |
| Compression |
yes |
| Configuration |
2-way Stereo/3-way Mono |
| EQ |
yes |
| Feedback Elimination |
yes |
| Limiting |
yes |
| Number of Ins (LDSPKR MGNT Processors) |
2 |
| Number of Outs (LDSPKR MGNT Processors) |
6 |
| PC GUI Control |
yes |
| RTA MIC INPUT |
Yes |
| Type |
Loudspeaker Management Processor |
|
