Home > Pro Audio > Signal Processors > Signal Routing > dbx 220i 2X2 Loudspeaker Management System with Display
dbx 220i 2X2 Loudspeaker Management System with Display (DBX220i)
Item# 183532

dbx 220i 2X2 Loudspeaker Management System with Display

0 Customer Reviews Write a Review
Save $270.00 (30%), List $899.95
$629.95
As low as $21.00 a month!
Limited Mail-In Rebate Offer


Download Rebate
Limited Mail-In Rebate Offers
Download Rebates

Why Buy

 

Recommended Accessories

 
The perfect signal processor for any fixed-install application.
  • Advanced feedback suppression (AFS)
  • Graphic and parametric EQ
  • Compressor
  • Limiter
  • Auto gain control
  • Noise gating
  • De-esser
  • Ducker
  • Bandpass filters
  • 2x2 matrix mixer
  • 1.3 seconds of delay
  • RS-232 PC GUI control
  • Mic/line inputs
  • Wall panel control
  • Security lockout

dbx 220i 2X2 Loudspeaker Management System with Display
Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 220i provides both system and microphone processing thanks to its full set of processing features and mic/line inputs. Click on the "View additional manufacturer information" link below to get the full scoop!

Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!

  • Analog Inputs
  • Number of Inputs: 2 Switchable line or mic inputs
  • Connectors: Female XLR line inputs and Euroblock
  • Type: Electronically balanced/RF filtered
  • Impedance: >50k ohms
  • Max input line level: +20dBu
  • CMRR: > 40dB, typically >55db @ 1kHz
  • Mic Pre gain: 30 to 60dB
  • Mic EIN: < 110dB, 22Hz-22kHz, 150 ohms
  • Mic Phantom Power: 15v

    Analog Outputs
  • Number of Outputs: 2
  • Connectors: Male XLR and Euroblock
  • Type: Electronically balanced, RF filtered
  • Impedance: 120 ohms balanced, 60 ohms unbalanced
  • Max Output Level: +20dBu

    A/D Performance
  • Type: dbx Type IV conversion system
  • Dynamic Range line: >113 dB A-weighted, >110 dB unweighted
  • Type IV dynamic range: >119 dB, A-weighted, 22kHz BW >117 dB, unweighted, 22kHz BW
  • Sample Rate: 48kHz

    D/A Performance
  • Dynamic Range: 112dB A-weighted, 109dB unweighted

    System Performance
  • Dynamic Range: >110dB A-weighted, >107dB unweighted
  • THD+N: 0.003% typical at +4dBu, 1kHz, 0dB gain
  • Frequency Response: 20Hz—20kHz, +/- 0.5dB
  • Interchannel Crosstalk: >110dB, 120dB typical
  • Crosstalk input to output: >780dB
  • Operating Voltage: 100 VAC, 50/60Hz, 120 VAC, 60Hz, 230VAC 50/60Hz
  • 19"W x 1-3/4"H x 7-7/10"D
  • Safety Agency Approvals: UL 6500, IEC 60065, EN 55013, E 60065

Product Specific Resources
Product Specific Resources
Manual for dbx 220i 2X2 Loudspeaker Management System with Display

Related Media
2 year warranty for products purchased from us, with the exception of the 480 series.
  Get off the couch and write a review!

Price Guarantee

Seen a lower price for the dbx 220i 2X2 Loudspeaker Management System with Display? Fill out this form and we'll BEAT IT*.
(US Currency)      
 
   

* Price guarantee valid on all new in-stock merchandise sold by an authorized U.S. Dealer. Guarantee does not apply to discontinued, blemished, damaged, closeout, open box, refurbished or auction items.

HACKER SAFE certified sites prevent over 99% of hacker crime.