Crown PCC130 Boundary Microphone
- Write a Review
- Seen a Lower Price? Click Here.
45 day price guarantee, 45 day return policy, 100% secure shopping
Offers a wide and smooth frequency response with minimal feedback.
The Crown PCC-130 is a surface mounted small cardioid microphone of professional quality. This handsomely styled unit is appropriate for use on the most elegant boardroom table or lectern. Other applications include churches, courtrooms and teleconferencing. With its small size, the PCC-130 is less conspicuous on a conference table than comparable mics. Because of its highly directional pickup pattern, the PCC-130 minimizes background noise and feedback.
The microphone uses the principle of phase coherency achieved by mounting a small-diameter mic capsule very near a boundary. Direct and reflected sound waves arrive at the mic in-phase, and add coherently. This enhances sensitivity, clarity and reach. Self-contained electronics eliminate the need for an in-line power module. Powered by 12-48V phantom power, the PCC-130 has a low-impedance balanced output which permits long cable runs without hum pickup or high-frequency loss. Included with each PCC-130 is a 15-foot (4.6-m), two-conductor shielded microphone cable with a TA3F connector (mic end) and 3-pin male XLR-type connector (output).
Capable of withstanding up to 120 dB SPL without distortion, the PCC-130 will never overload in practical use. Its electret-condenser capsule provides a wide, smooth frequency response from 50 Hz to 20 kHz. RFI suppression is included. Self-noise is low and sensitivity is very high. A bass-tilt switch allows the user to tailor the low-end response for particular applications.
- Cardioid polar pattern reduces background noise and provides an impressive gain-before-feedback
- CROWN PCC technologie (phase coherent cardioid) prevents phase interference due to table sound reflections
- Wide and smooth frequency response
- Exceptional performance and small size
- Three-position bass-tilt switch
- Houses of worship
- Distance learning
Order an inconspicuous boundary mic today!
PCC130 Boundary Microphone Specifications:
- Polar pattern: cardioid
Frequency range: 50 to 20,000 Hz
Sensitivity: 22 mV/Pa (-30 dBV)
Maximum SPL: 120 dB
Equivalent noise level: 22 dB-A
Signal/noise ratio: 72 dB (A-weighted)
Impedance: 150 ohms
Connector: Switchcraft TB3M
Powering: 12 to 48 V phantom power to DIN/IEC
Finish: Satin black
Dimensions: 6.4 x 8.9 x 2.5 cm (2.5 x 3.49 x 0.988 in.)
Net weight: 269 g (9.5 oz.) incl. cable
Cable: 4.6 m (15 ft.)