Shure ULXP124/BETA87C Dual Channel Mixed Wireless System  

Product #270880

45 day price guarantee, 45 day return policy, 100% secure shopping

Unavailable

Item Note:

This product has been discontinued but may be available as a used item.

Similar Items

See All Shure Combo Wireless Systems
Shure

Professional grade.

The Shure ULXP124/BETA87A Dual Channel Mixed Wireless Microphone System includes two ULXP4 Diversity Receivers, a ULX1 Bodypack Transmitter, and a ULX2 Handheld transmitter fitted with a Beta 87A microphone capsule. Shure ULX Professional systems offer advanced features and controls, including lockable settings and group scan function. Over 1400 selectable, pre-programmed frequencies are available, and Automatic Frequency Selection provides a straight shot to a clear channel.

ULXP4 Wireless Diversity Receiver

The expanded feature set of the ULXP4 wireless receiver, with advanced settings and controls including lockable settings and group scan, offers a direct path to full, clear audio signals. The ULXP4 offers an exceptional value in both performance and price, for both working musicians and sound installers.

ULX1 Wireless Bodypack Transmitter

The low-profile, highly durable body-pack ULX1 has all the characteristics to meet the demands of high performance. For use with headworn, lavalier and instrument microphones, as well as guitars and basses. Attaches to belt, waistband or guitar strap with clip for hands-free mobility.

ULX2 Handheld Transmitter

The ULX2 Handheld Transmitter features 3-segment battery fuel gauge, frequency and power settings, and control lockout. A backlit LCD shows group and channel.

Beta 87C Vocal Microphone

The Beta 87C premium vocal microphone delivers studio-grade performance and a smooth, extended high-end frequency response in a cardioid condenser design. The microphone adds warmth to the frequency response and creates an ideal environment for in ear personal monitoring. And its highly consistent cardioid pattern offers excellent rear rejection.

Features ULXP4 Wireless Diversity Receiver
  • Automatic Frequency Selection with group scan function
  • Over 1400 selectable frequencies
  • Predictive Diversity
  • 5-segment transmitted audio signal strength meter
  • 5-segment RF meter
  • 3-segment transmitter battery fuel gauge
  • Advanced multi-function LCD displays group and channel
  • Mic/Line switch
  • Remotable 1/2-wave antenna
  • Frequency and volume lockout
  • XLR and 1/4-inch output
  • Rugged metal chassis
  • 1/2 rack design
ULX1 Wireless Bodypack Transmitter
  • Three-segment battery fuel gauge
  • Frequency and power lockout
  • Flexible 1/4 wave antenna
  • TA4F mini four-pin input connector
  • Backlit LCD display shows group and channel setting
  • Adustable audio gain control
  • Input attenuation switch (selects 0 dB or -20 dB attenuation)
  • PEAK icon appears when audio input overloads the transmitter
  • Power on/off switch
  • 8 hour battery life (9V battery)
  • 300 foot (100m) operating range
ULX2 Handheld Transmitter
  • 8-9 Hour Battery Life
  • Power: On/Off Switch, Battery
  • LED-Green When ON, Red When Battery Low
  • Three-segment Battery Power Icon
  • PEAK Icon-Appears When Audio Signal Overloads
  • Group/Channel Displays
  • SET Button for Saving Settings
  • Adjustable Audio Gain Control
  • Input Attenuation Switch-Select 0dB for Voice/Low Output; 20dB for High Output
  • 4-pin Mini Connector
  • Battery Cover Unscrews to Expose Battery and Gain Control
  • 9V Battery Included
Beta 87C Vocal Microphone
  • Smooth, wide frequency response with slight presence rise
  • Uniform cardioid polar pattern for maximum isolation
  • Minimum off-axis tone coloration
  • Low-frequency roll-off compensates for proximity effect
  • Three-stage pop filter minimizes breath pop and noise
  • Break-resistant stand adapter
  • Frequency response: 50 - 20,000 Hz

Order today and experience the best in wireless.

 

ULXP124/BETA87C Dual Channel Mixed Wireless System Specifications:

  • RF Carrier Frequency Range: 554.000 to 865.000 MHz (Available frequencies depend on the applicable regulations in the country where the system is
  • used). Refer to the frequency supplement supplied with the system.
  • Effective Range: 100 m (300 ft.) under optimal conditions (NOTE: Actual working range depends on RF signal absorption, reflection, and interference)
  • Audio Frequency Response: 25 to 15,000 Hz, ± 2dB (NOTE: Overall system frequency response depends on the microphone element.)
  • ULXP4 Receiver Input
  • Connector: Antenna Power Input
  • Connector Type: BNC IEC 320
  • Actual Impedance: 50 Ohms
  • Nominal Input Level: —95 to —30 dBm 15 VDC
  • Maximum Input Level: +6 dBm (—20 dBm recommended) 18 Vdc
  • Pin Assignments: Shell = Ground Center = Signal IEC Standard
  • Voltage for Remote Power: 12 Vdc, 150 mA maximum
  • ULXP4 Receiver Output
  • Connector: High Z Audio; Low Z Audio
  • Output Configuration: High Z Audio Unbalanced (1/4 in.); Low Z Audio Balanced (XLR)
  • Actual Impedance: High Z Audio 3 k0hms; Low Z Audio 22
  • Nominal Input Level: High Z Audio Pin Assignments: Tip = Hot Ring/ Sleeve = Gnd: Low Z Audio 1 = Ground 2 = Hot 3 = Cold
  • Voltage/Current/Phantom: Power Protection?: High Z Audio; Yes Low Z Audio Yes
  • ULX1 Transmitter Input
  • Connector: TA4F
  • Input Configuration: Unbalanced, active
  • Actual Impedance: 18 kohms with lavalier microphone; 1 Mohms with instrument cable
  • Maximum Input Level: 10 Vp—p (12 dBV) for 1% THD at minimum gain setting
  • using 1 kHz signal.
  • TA4F Connector Pin Assignments: Pin 1: Tied to Ground; Pin 2: Tied to +5 V; Pin 3: Tied to Audio; Pin 4: Tied thru 20kohms Resistor to Ground. (On instrument adapter cable, Pin 4 floats)
  • Voltage for Remote Power: +5 V supplied to microphone cartridge
  • ULX1 Transmitter Output
  • Actual Impedance: 50 Ohms
  • Nominal Output Level: 20 mW
  • Maximum Output Level: 30 mW
  • ULX2 Transmitter Input
  • Input Configuration: Unbalanced, active
  • Actual Impedance: 20 kohms
  • Maximum Input Level: 10 Vp—p (12 dBV) for 1% THD at minimum gain setting using 1 kHz signal.
  • ULX2 Transmitter Output
  • Actual Impedance: 50 Ohms
  • Nominal Output Level: 20 mW
  • Maximum Output Level: 30 mW
  • Pin Assignments: Shell = Ground Center = Signal
  • Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive
  • voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output
  • Transmitter Gain Adjustment Range: ULX1: 25 dB
  • Receiver Audio Output Level (± 38 kHz deviation, 1 kHz tone):
  • XLR connector (into 600 ohm load): +3.9 dBV (line), —17 dBV (mic)
  • 1/4 inch connector (into 3000 ohm load): —2 dBV
  • Impedance: ULX2 (input): 1 Megohm; ULXP4 (output): 50 ohms at line level; 2000 ohms at mic level
  • Modulation: ±38 kHz deviation compressor-expander system with pre- and de-emphasis.
  • RF Power Output: ULX2: 30 mW maximum
  • Dynamic Range: >100 dB, A-weighted
  • RF Sensitivity: 1.26 uV for 12 dB SINAD (typical)
  • Image Rejection: 80 dB typical
  • Spurious Rejection: 75 dB typical
  • Ultimate Quieting (reference ± 38 kHz deviation): >105 dB, A-weighted
  • System Distortion (reference ± 38 kHz deviation, 1 kHz modulation): 0.3% total harmonic distortion, typical
  • Power Requirements: ULX2: 9V alkaline battery; 8.4 V Nicad optional; ULXS4: 14 - 18 Vdc (negative ground), 550 mA
  • Battery Life: 8 to 9 hours (with 9V alkaline battery)
  • Operating Temperature Range: - 20 degrees to 49 degrees C (- 4 degrees to 120 degrees F)
  • NOTE: Battery characteristics may limit this range
  • NOTE: Bodypack and Handheld Transmitters cannot be used simultaneously
  • ULXP4 Dimensions (H x W x D): 1.72 in. x 8.56 in. x 6.88 in. (43 mm x 214 mm x 172 mm)
  • ULXP4 Weight: 2 lbs 7 oz. (1105 g)
  • ULX2/BETA87C Dimensions (Length x Diameter): 8.8 x 2 in. (223.5 x 51 mm)
  • ULX2/BETA87C Weight: 9.1 oz. (258 g) without battery
  • ULX1 Dimensions (H x W x D): 3.86 x 2.68 x 1.10 in. (96.5 x 67 x 26.7 mm)
  • ULX1 Weight: 79 g (2.8 oz.) without battery
  • Beta 87C Vocal Microphone
  • Type: Condenser (electret bias)
  • Frequency Response: 50 to 20,000 Hz
  • Polar Pattern: Cardioid
  • Output Impedance: Rated at 150 ohms (100 Ohms actual +/- 20%) Recommended minimum load impedance: 800 ohms
  • Sensitivity (at 1,000 Hz): Open Circuit Voltage: -51 dBV/Pa (2 mV)(1 Pa = 94 dB SPL)
  • Output Clipping Level: 1000 Ohm Load at 1,000 Hz: -6 dBV (0.5 V)
  • Maximum SPL: 139 dB at 1,000 Hz (0.25% THD, 1000 Ohm load
  • Self-Noise: 22 dB typical, A-weighted; 24 dB typical, weighted per DIN 45 405
  • (equivalent sound pressure level; measured with true rms voltmeter)
  • Dynamic Range: 117 dB (maximum SPL to A-weighted noise level)
  • Hum Sensitivity: -5 dB equivalent SPL, maximum, in a 1 mOe field (60 Hz)
  • Signal-to-Noise Ratio: 72 dB at 94 dB SPL (IEC 651) (S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.)
  • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector.
  • Power: Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3; Current Drain: 1.0 to 1.2 mA
  • Connector: Three-pin (XLR) professional audio
review resources
Loading....
write a review