Shure ULXP124/BETA58A Dual Channel Mixed Wireless System  

Product #270849

45 day price guarantee, 45 day return policy, 100% secure shopping

$1,699.00 Finance Now!

MSRP: $2,124.00   You Save: $425.00 (20%)

Select a Style to Continue
Platinum Coverage: (What’s This?) most popular
Add to list
See All Shure Combo Wireless Systems
Shure

Professional grade.

The Shure ULXP124/87 Dual Channel Mixed Wireless Microphone System includes two ULXP4 Diversity Receivers, a ULX1 Bodypack Transmitter, and a ULX2 Handheld transmitter fitted with a Beta 58A microphone capsule. Shure ULX Professional systems offer more advanced features and controls, including lockable settings and group scan function. Over 1400 selectable, pre-programmed frequencies are available, and Automatic Frequency Selection provides a straight shot to a clear channel.

ULXP4 Wireless Diversity Receiver

The expanded feature set of the ULXP4 wireless receiver, with advanced settings and controls including lockable settings and group scan, offers a direct path to full, clear audio signals. The Shure ULXP4 offers an exceptional value in both performance and price, for both working musicians and sound installers.

ULX1 Wireless Bodypack Transmitter

The low-profile, highly durable body-pack ULX1 has all the characteristics to meet the demands of high performance. For use with headworn, lavalier and instrument microphones, as well as guitars and basses. Attaches to belt, waistband or guitar strap with clip for hands-free mobility.

ULX2 Handheld Transmitter

The ULX2 Handheld Transmitter features 3-segment battery fuel gauge, frequency and power settings, and control lockout. A backlit LCD shows group and channel.

Beta 58A Vocal Microphone

The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It has become a leading choice among vocalists and touring professionals worldwide.

The Beta 58A maintains a true supercardioid pattern throughout its frequency range. This insures high gain before feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Beta 58A has a shaped frequency response that is ideal for close—up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille.

Features

ULXP4 Wireless Diversity Receiver

  • Automatic Frequency Selection with group scan function
  • Over 1400 selectable frequencies
  • Predictive Diversity
  • 5-segment transmitted audio signal strength meter
  • 5-segment RF meter
  • 3-segment transmitter battery fuel gauge
  • Advanced multi-function LCD displays group and channel
  • Mic/Line switch
  • Remotable 1/2-wave antenna
  • Frequency and volume lockout
  • XLR and 1/4-inch output
  • Rugged metal chassis
  • 1/2 rack design

ULX1 Wireless Bodypack Transmitter

  • Three-segment battery fuel gauge
  • Frequency and power lockout
  • Flexible 1/4 wave antenna
  • TA4F mini four-pin input connector
  • Backlit LCD display shows group and channel setting
  • Adustable audio gain control
  • Input attenuation switch (selects 0 dB or -20 dB attenuation)
  • PEAK icon appears when audio input overloads the transmitter
  • Power on/off switch
  • 8 hour battery life (9V battery)
  • 300 foot (100m) operating range

ULX2 Handheld Transmitter

  • 8-9 Hour Battery Life
  • Power: On/Off Switch, Battery
  • LED-Green When ON, Red When Battery Low
  • Three-segment Battery Power Icon
  • PEAK Icon-Appears When Audio Signal Overloads
  • Group/Channel Displays
  • SET Button for Saving Settings
  • Adjustable Audio Gain Control
  • Input Attenuation Switch-Select 0dB for Voice/Low Output; 20dB for High Output
  • 4-pin Mini Connector
  • Battery Cover Unscrews to Expose Battery and Gain Control
  • 9V Battery Included

BETA 58A Vocal Microphone

  • Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
  • Uniform supercardioid pattern for high gain before feedback and superior rejection of off—axis sound
  • Neodymium magnet for high signal—to—noise output
  • Hardened steel mesh grille that resists wear and abuse
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
  • Minimally effected by varying load impedance
  • Legendary Shure quality and reliability
 

ULXP124/BETA58A Dual Channel Mixed Wireless System Specifications:

  • RF Carrier Frequency Range: 554.000 to 865.000 MHz (Available frequencies depend on the applicable regulations in the country where the system is
  • used). Refer to the frequency supplement supplied with the system.
  • Effective Range: 100 m (300 ft.) under optimal conditions (NOTE: Actual working range depends on RF signal absorption, reflection, and interference)
  • Audio Frequency Response: 25 to 15,000 Hz, ± 2dB (NOTE: Overall system frequency response depends on the microphone element.)
  • ULXP4 Receiver Input
  • Connector: Antenna Power Input
  • Connector Type: BNC IEC 320
  • Actual Impedance: 50 Ohms
  • Nominal Input Level: —95 to —30 dBm 15 VDC
  • Maximum Input Level: +6 dBm (—20 dBm recommended) 18 Vdc
  • Pin Assignments: Shell = Ground Center = Signal IEC Standard
  • Voltage for Remote Power: 12 Vdc, 150 mA maximum
  • ULXP4 Receiver Output
  • Connector: High Z Audio; Low Z Audio
  • Output Configuration: High Z Audio Unbalanced (1/4 in.); Low Z Audio Balanced (XLR)
  • Actual Impedance: High Z Audio 3 k0hms; Low Z Audio 22
  • Nominal Input Level: High Z Audio Pin Assignments: Tip = Hot Ring/ Sleeve = Gnd: Low Z Audio 1 = Ground 2 = Hot 3 = Cold
  • Voltage/Current/Phantom: Power Protection?: High Z Audio; Yes Low Z Audio Yes
  • ULX1 Transmitter Input
  • Connector: TA4F
  • Input Configuration: Unbalanced, active
  • Actual Impedance: 18 kohms with lavalier microphone; 1 Mohms with instrument cable
  • Maximum Input Level: 10 Vp—p (12 dBV) for 1% THD at minimum gain setting
  • using 1 kHz signal.
  • TA4F Connector Pin Assignments: Pin 1: Tied to Ground; Pin 2: Tied to +5 V; Pin 3: Tied to Audio; Pin 4: Tied thru 20kohms Resistor to Ground. (On instrument adapter cable, Pin 4 floats)
  • Voltage for Remote Power: +5 V supplied to microphone cartridge
  • ULX1 Transmitter Output
  • Actual Impedance: 50 Ohms
  • Nominal Output Level: 20 mW
  • Maximum Output Level: 30 mW
  • ULX2 Transmitter Input
  • Input Configuration: Unbalanced, active
  • Actual Impedance: 20 kohms
  • Maximum Input Level: 10 Vp—p (12 dBV) for 1% THD at minimum gain setting using 1 kHz signal.
  • ULX2 Transmitter Output
  • Actual Impedance: 50 Ohms
  • Nominal Output Level: 20 mW
  • Maximum Output Level: 30 mW
  • Pin Assignments: Shell = Ground Center = Signal
  • Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive
  • voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output
  • Transmitter Gain Adjustment Range: ULX1: 25 dB
  • Receiver Audio Output Level (± 38 kHz deviation, 1 kHz tone):
  • XLR connector (into 600 ohm load): +3.9 dBV (line), —17 dBV (mic)
  • 1/4 inch connector (into 3000 ohm load): —2 dBV
  • Impedance: ULX2 (input): 1 Megohm; ULXP4 (output): 50 ohms at line level; 2000 ohms at mic level
  • Modulation: ±38 kHz deviation compressor-expander system with pre- and de-emphasis.
  • RF Power Output: ULX2: 30 mW maximum
  • Dynamic Range: >100 dB, A-weighted
  • RF Sensitivity: 1.26 uV for 12 dB SINAD (typical)
  • Image Rejection: 80 dB typical
  • Spurious Rejection: 75 dB typical
  • Ultimate Quieting (reference ± 38 kHz deviation): >105 dB, A-weighted
  • System Distortion (reference ± 38 kHz deviation, 1 kHz modulation): 0.3% total harmonic distortion, typical
  • Power Requirements: ULX2: 9V alkaline battery; 8.4 V Nicad optional; ULXS4: 14 - 18 Vdc (negative ground), 550 mA
  • Battery Life: 8 to 9 hours (with 9V alkaline battery)
  • Operating Temperature Range: - 20 degrees to 49 degrees C (- 4 degrees to 120 degrees F)
  • NOTE: Battery characteristics may limit this range
  • NOTE: Bodypack and Handheld Transmitters cannot be used simultaneously
  • ULXP4 Dimensions (H x W x D): 1.72 in. x 8.56 in. x 6.88 in. (43 mm x 214 mm x 172 mm)
  • ULXP4 Weight: 2 lbs 7 oz. (1105 g)
  • ULX2/BETA58 Dimensions (Length x diameter): 8.7 x 2 in. (220.9 x 51 mm)
  • ULX2/BETA58 Weight: 9.1 oz. (258 g) without battery
  • ULX1 Dimensions (H x W x D): 3.86 x 2.68 x 1.10 in. (96.5 x 67 x 26.7 mm)
  • ULX1 Weight: 79 g (2.8 oz.) without battery
  • BETA 58A Vocal Microphone
  • Type: Dynamic (moving coil)
  • Frequency Response: 50 to 16,000 Hz (NOTE: The curve above shows on-axis response at a distance of 2 feet from a uniform sound source. Your response may vary, depending on microphone position.)
  • Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency
  • Output Level (at 1,000 Hz): Open Circuit Voltage: -51.5 dBV/Pa* (2.6 mV)
  • *1 Pa = 94 dB SPL
  • Impedance: Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z Phasing.
  • Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3.
review resources
Loading....
write a review